Dremel 678 ringlõikur ja sirge serva juhik, pöörleva tööriista kinnitus, sobib Dremeli mudelitele 4300, 4000, 3000 ja 8220

Name: Dremel 678 ringlõikur ja sirge serva juhik, pöörleva tööriista kinnitus, sobib Dremeli mudelitele 4300, 4000, 3000 ja 8220
Brand: Dremel
SKU: 0080596025083
Price: 42.46 EUR
Availability: InStock

Brand:Dremel

3.6/5

€
42.46

TOOTE KIRJELDUS Kasutage oma Dremeli pöörlevaid tööriistu maksimaalselt, kasutades meie uuenduslikku ja ulatuslikku pöörlevate tarvikute ja lisaseadmete sarja. Olenemata teie projektist on meil teile ideaalne lahendus. Dremeli tarvikud sobivad teie pöörleva tööriista külge, et anda sellele spetsiaalne funktsioon. Olenemata sellest, kas soovite nikerdada, graveerida, lõigata või lihvida, on töö tegemiseks olemas Dremeli kinnitus. Uuendusliku Dremeli ringlõikuri ja sirge serva kinnitusega on teie tavalise pöörleva tööriistaga lihtne teha rohkem. See mitte ainult ei kinnitu lihtsalt Dremeli pöörleva tööriista külge ja lõikab täiuslikke ringe alates ¾ tollist. kuni 12 tolli. läbimõõduga, kuid selle sirge serva juhik võimaldab suunata või lõigata sirgjooneliselt. Sügavuse reguleerimine võimaldab hõlpsalt seadistada õiget lõikesügavust. Ühildub enamiku Dremeli juhtmega ja aku pöörlevate tööriistadega ning sellele kehtib 1-aastane piiratud garantii. TOOTJALT See uuenduslik lisaseade on lihtne viis ringikujuliste aukude lõikamiseks mitut tüüpi materjalidesse. Ringlõikur ja sirge serva juhik 678-01 kinnitatakse hõlpsalt Dremeli kiire pöörleva tööriista külge ja lõikab täiuslikke ringe läbimõõduga 3/4-tollisest kuni 12-tollise läbimõõduga. Ringlõikuril on mugavad mõõtejuhised nii tollides kui ka sentimeetrites, nii et saate iga kord õige suurusega ringi välja lõigata. Sirge serva juhik võimaldab suunata või lõigata sirgjooneliselt.

Summa

Lisa ostukorvi Osta kohe

EAN: 0080596025083

Kategooriad Tööriistad ja kodukaubad, Elektri- ja käsitööriistad, Elektritööriistade osad ja tarvikud, Ehituspinkide osad ja tarvikud, Tarvikud,

Straight Edge Guide võimaldab suunata või lõigata sirgjooneliselt. Sügavuse reguleerimine võimaldab hõlpsalt seadistada õiget lõikesügavust. Kinnitub kiiresti ja lihtsalt ilma tööriistadeta. Ühildub Dremeli tööriistamudelitega: 100, 200, 3000, 4000, 8220, 8240, 8250 ja 8260. Sobib ka Dremel 4300-le, kui seda kasutatakse koos tsangiga ja tsangmutriga. Täpne stantsitud teraskonstruktsioon täpsuse ja vastupidavuse tagamiseks. Teeb 3/4 tollist ringe. -12 tolli. (1,9-30 cm).

Batteries Included?	‎No
Batteries Required?	‎No
Color	‎Silver
Country of Origin	‎Taiwan
Customer Reviews	4.5 4.5 out of 5 stars 1,287 ratings 4.5 out of 5 stars
Included Components	‎Straight Edge Guide
Is Discontinued By Manufacturer	‎No
Item model number	‎678-02
Item Package Quantity	‎1
Item Weight	‎8.4 ounces
Manufacturer	‎Dremel
Part Number	‎678-02
Power Source	‎AC
Product Dimensions	‎3.45 x 5.1 x 8.4 inches
Warranty Description	‎2 Years

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega^*

Teie hinnang

Scritto da: LL

Much needed for a straight line or circle.

It's worth the money

Scritto da: Jm2013

Works great for rough cut circles.

I purchased this to cut an expansion gap in my vinyl plank floor for a 4 inch floor outlet. I did practice on scrap pieces before doing it. I found that you have to have a constant motion without stopping when using the circle jig, or else you will protrude slightly outside the circle until you move consistently again. It worked great for my application since the electric box floor flange covered it by 1/4”. I wouldn’t recommend this jig for precise finish work. But for rough cut applications, I was able to get a nearly perfect circle. The only inconsistency I had in my project was where I started and stoped.

Scritto da: nayef mohammed

perfect

it's a great job

Scritto da: Dan

Great Tool????

Very easy to use

Scritto da: No BS Customer

Does the job without breaking the bank...

Satisfied with quality and overall design for the price...

Scritto da: Jai Sri Astrology

Finally a circle cutter

I am so thankful I finally found one of these Dremel accessory attachments circle cutters I have been needing something like this for so long I did not want to spend an arm and a leg to buy a router and in my artwork I am constantly needing to cut circles either out of the center of a piece of wood or cutting an outer circle into a piece of wood I have three different dremels and I thought surely this thing will fit on one of them I was a little concerned about the sturdiness of the wood cutting bit that came with it because I was cutting through an half inch piece of plywood however after I set it up and started my pilot holes and started cutting into the circle of wood it went smoothly the bit held up great and I cut a perfect circle out of the center of my wood I even turned around and tried it on a plastic decorative plate and it worked great on there so I would highly highly recommend this accessory if you are needing to cut circles and you don't want to spend an arm and a leg on a humongous expensive router this definitely worked I even bought a couple of extra wood cutting drill bits for my Dremel which is always good to have on hand because you never know when you'll break one but overall this was a great great buy for an excellent price

Scritto da: Rich

Works But not Stable.

Its ok very cheap material you need 3 hands to use.. if you buy ,,, buy clamps also..

Scritto da: Morgan Lee Jordan

Worked perfect for drywall hole for electrical box

So easy to cut a perfect hole in new drywall for an electrical box. I was working with a fairly small area and couldn’t have any room for error. This was exactly what I needed for precision, ease and confidence in safety.

Scritto da: ScienceFictionFantasyReader

Works roughly

It seemed a very useful tool to cut circles and straight lines. It does it but not 100% accurately as there some play in the height adjustment.

Scritto da: raj

Work well

The tool worked very well. I had to make cut outs in ceiling panels and it did a great job. Just make sure that you are using the right bit for the job.

Scritto da: Mario Cisneros Gonzalez

Que venga tal como se muestra en la promoción de venta

Recibí el producto pero falta la guía para corte recto que aparece en la foto de promoción del mismo, que puedo hacer al respecto?

Scritto da: Waysay

Hard to find item in hardware stores

Easy to use. Makes perfect circle

Scritto da: Mina

Très bon accessoire !! Facile à utiliser

Très bon outil , excellent pour faire des coupes circulaire avec précision