Dremeli 9929 pöörleva tööriista graveerimisotsak teemantotsakuga – ideaalne metalli, klaasi ja puidu graveerimiseks, hall, hall

Name: Dremeli 9929 pöörleva tööriista graveerimisotsak teemantotsakuga – ideaalne metalli, klaasi ja puidu graveerimiseks, hall, hall
Brand: Dremel
SKU: 0080596099299
Price: 41.00 EUR
Availability: InStock

Brand:Dremel

3.5/5

€
41.00

TOOTE KIRJELDUS Jälgige end graveeringuga. Graveerija kasutamine on suurepärane viis igasuguste asjade isikupärastamiseks, lisades igapäevastele esemetele omanäolise hõngu või ellu viia lõbusaid käsitööprojekte. Dremel Engraver on ideaalne kunsti- ja käsitöötööriist, et teha oma sõpradele ja perele ainulaadseid kingitusi või kohandada koduprojekti. Ideaalne dekoratiivseks graveerimiseks 9929 1/10 (2,54 mm) teemantgraveerimispunkt on vahetatav otsik kasutamiseks koos 290 Dremeli graveerijaga. Ideaalne iga kunsti- ja käsitööprojekti jaoks, Diamond Engraving Point on mõeldud kõva pinna graveerimiseks, et luua peeneid jooni erinevate materjalide, sealhulgas metalli, plasti, klaasi, keraamika, puidu ja naha sügavate soonteni. Graveerimisotsak on valmistatud karbiidist ja sellel on 1/32-tolline (0,8 mm) ots. TOOTJALT Täiendav otsik 290 Dremeli graveerija jaoks. Kasutage seda teemantpunkti pidevaks tööks või äriliseks tööks. Võib kasutada ka dekoratiivseks graveerimiseks.

Summa

Lisa ostukorvi Osta kohe

EAN: 0080596099299

Kategooriad Tööriistad ja kodukaubad, Elektri- ja käsitööriistad, Elektritööriistade osad ja tarvikud, Ehituspinkide osad ja tarvikud, Tarvikud,

USA-PÕHINE KLIENDITEENINDUS – saadaval vestluse, e-posti või telefoni teel või külastage meid meie teeninduskeskuses Racine'is, WI. 9929 Diamond Point töötab kõige paremini terasel, kroomil, titaanil, graniidil ja muudel kõvadel aluspindadel. Dremeli 9929 Diamond Point tarvik on mõeldud kasutamiseks koos graveerijaga 290 ja sobib ideaalselt dekoratiivseks graveerimiseks ja kõvade pindade isikupärastamiseks. Graveerige, kaunistage või isikupärastage mitmesuguseid materjale – metallist plastist kuni puidu ja nahani, kasutades Dremel 290 graveerijat.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Dremel
Color	‎Gray
Country of Origin	‎USA
Customer Reviews	4.4 4.4 out of 5 stars 1,038 ratings 4.4 out of 5 stars
Finish	‎Titanium, Chrome
Finish Type	Titanium, Chrome
Included Components	‎Unit^Instruction Guide
Is Discontinued By Manufacturer	‎No
Item model number	‎9929
Item Package Quantity	‎1
Item Weight	‎0.176 ounces
Manufacturer	‎Dremel
Material	Diamond
Material	‎Diamond
Part Number	‎9929
Power Source	‎Hand Powered
Shank Type	Straight
Tool Flute Type	Straight
Warranty Description	‎1 Year

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega^*

Teie hinnang

Scritto da: Younas

Got what I ordered. Super

Got what I ordered. Super

Scritto da: Amazon Customer

Good for the value

This isn’t high end product for consistent use but good for the once and a while user

Scritto da: Amazon Customer

Good bit

Good bit

Scritto da: K. Penney

Works great for engraving hard metals

I have a CNC machine that I've been using to do several engravings (maybe I'll post a video of this in action) and was struggling with the set of engraving bits I bought specifically for a dremel. It was a kit of engraving bits that I also got on Amazon so I thought that was really all I needed and boy was I wrong. I thought maybe my dremel wasn't powerful enough to do the engravings since the results I was getting with the first set of engraving bits were turning out jagged and not very clean. It also wasn't cutting very deep into the metal, so when the machine was moving it would get caught on spots and I could see the bits bending. Not good. I was afraid they were going to break, but they didn't. They didn't really work well either. So I thought well, maybe these bits aren't intended for hard metals (even though they should have worked with hard metals, or maybe I just didn't look into it enough) so I ended up finding the Dremel 9929 Engraver Diamond Point Bit. From the second I put this on the dremel my results were 1000x better! I was getting very clean precision engravings in some pretty hard metal. Not sure exactly what the metal was, but I was engraving a tactical combat knife so it had to be some pretty hard metal and it engraved like a champ! I haven't engraved too much stuff, but it has already been miles better than any other engraving bit I've tried (I'm a newb to engraving though). Anyone doing some simple CNC machining with a dremel, this bit is a must. Next I want to try glass and stone. We'll see how that goes...

Scritto da: Marcus Bernau

The ultimate penetrator

I have etched my name into every tool I own and most of them are hardened steel. Some tools are so hard I doubt it would work but at the right angle it has no issues of doing the job.

Scritto da: J.

Hard to communicate with this seller

This engraver bit didn't fit in the first dremel I received - so I sent the drill bit back along with the dremel since I wasn't sure if the problem was the machine or the bit. A replacement for both pieces was sent quickly, which I appreciate. But the original diamond drill bit was returned along with the dremel - yet I'm being charged $17.00 for the bit. There's nothing I can do about it since I can't find any way to communicate with the seller. The replacement works fine.....I just had to pay for it twice. By the way, this bit is VERY fine for your smallest engraving.

Scritto da: S. Schmidt

Not For Engraving Tools

This diamond bit failed after I engraved my 7-character last name 1/4-inch high on 6 tools. I figured it was defective, so I sent it back to Dremel (Bosch in Arkansas) via 1st class mail (my mistake for not getting tracking). Two months later, contacted Dremel; rep was very nice, but could find no record of receiving my bit. So, I just purchased another and got same bad result (yes, I know doing the same thing twice and expecting a different result is the definition of crazy). I should have read the 1-star reviews that complain about performance on metal, and many about engraving on tools specifically. I reverted to the standard carbide tip, which worked fine for engraving my tools (as others have reported).

Scritto da: 813dxd

Great value

This has been the first engraver I have owned where I can actually see the letters I have engraved without having to repeatedly go over them. I bought the Diamond tip but so far haven’t had a need to use it. Powerful little tool. Sturdy. Far superior than the $20 engraver I bought from Lowe’s.

Scritto da: Amazon Customer

Three Stars

Don't that hard

Scritto da: KeensightPhotography

Poor performance; less durable than original carbide tip.

Poor quality when compared with similar offering from Burgess/Record. After less than 40 minutes intermittent use on a small glass-engraving project, there was no traceable impression being left by the tip. I had to resort to the original carbide tip that came with the machine, in order to complete the job. As this is the only diamond tip for this engraver, I would strongly discourage purchase of the Dremel Engraver is you have any glassware to work on.

Scritto da: Luke PL

After 5 min of engraving the tool is useless.

After 5 min of engraving the tool is useless. I used the tool to engrave in metal but I was not even able to finish. Do not buy it waste of money

Scritto da: Julio Rojas

No me duró en absoluto

Lo quise ocupar para grabar en vidrio y como en 5 min se le desgasto la punta y ya no grababa nada, pésimo y muy caro

Scritto da: Gaetan Tremblay

Excellent produit très performant reste affute

Installer sur marqueur canadian tire , non disponible chez canadian tire , doit acheter nouveau mais tige sans endurance arrondi très rapidement pas bon pour acier seulement plastique