Vihmatilk 1/4 tolli toitetoru, pruun vinüül, 50 jalga

Name: Vihmatilk 1/4 tolli toitetoru, pruun vinüül, 50 jalga
Brand: Raindrip
SKU: 0748344739452
Price: 29.66 EUR
Availability: InStock

Brand:Raindrip

3.4/5

€
29.66

Kaasas üks 50 jala pikkune ¼ tollise vinüültoruga mähis; Raindrip seisab oma toote juures ja annab 1-aastase 100% rahulolugarantii. Kui teie toode läheb katki, saadab Raindrip teile tasuta uue, tasuge lihtsalt saatmise ja käitlemise eest. Vinüültorud on vastupidavuse tagamiseks valmistatud 100% puhta sisuga; Töötab Raindrip toodete ja muude ühilduva ühendustüübiga toodetega. Täieliku tilkniisutussüsteemi osana transpordib toitetorustik vett niisutatavasse piirkonda; Torupool on mugavuse huvides kokkutõmbunud; vajadusel lihtne juurde pääseda. Toru välisläbimõõt (OD) on 0,250 tolli, siseläbimõõt (ID) on 0,170. sisse.; ühendage peatoitetorustikuga ¼-tollise mikroliitmikuga, nagu näiteks okaspistikuga, ühendage teine ots otse emitteriga, et vesi taimedesse viia; Tilkniisutus vähendab veekasutust kuni 70% võrreldes tavapärase vihmutiga kastmisega; vett kasutatakse täpselt ja kiirusega, mida pinnas seda vastu võtab, et vältida äravoolu ja erosiooni. Harutage peatoitetorustik, et luua toiteliin, mis varustab vett madala vooluhulga tilk-kastmisseadmesse või kasutage seda väikese tilkniisutussüsteemi põhiliinina; Töötab erinevates valdkondades, alates väikestest kuni suurteni, tasapinnaliste või kaldega; transpordib vett puudele, põõsastele, lillepeenardele, pinnasesse, juurviljaaedadesse, pottidesse, istutuskastidesse ja rippkorvidesse.

Summa

Lisa ostukorvi Osta kohe

EAN: 0748344739452

Kategooriad Terrass, muru ja aed, Aiapidamine ja muru hooldus, Kastmisseadmed, Automaatne kastmisvarustus, Kastmistorud,

Brand	Raindrip
Color	Brown
Item Dimensions LxWxH	6 x 6 x 2.5 inches
Item Weight	0.83 Pounds
Material	Vinyl

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega^*

Teie hinnang

Scritto da: Alexey Pavlunenko

Great value for the price

Leave it out in the sun for 15 minutes and the tubing will soften up and will fit much easier on the connectors.

Scritto da: Charles D. Gamble

Best on the market.

Rain Bird products are simply the best on the market.

Scritto da: samo47

very flexible

very flexible easy to use

Scritto da: RHC

Soft and flexible, which is both good and bad...

I like the idea of drip tubing I can more easily push onto emitters and drip manifolds. Works great unless you have a line without a pressure regulator... I have several old sprinkler systems that I've been converting over to drip to save water (here in California it's a necessity lately). They don't have pressure regulators inline at the valves and have just been replacing sprinkler heads with 1/2" drip manifolds. The normally stiff black 1/4" drip line I have works great, but I've been trying out this softer brown drip line and the pressure is just enough to occasionally blow the line off of the drip manifolds or sometimes the drip emitters also, causing a little flood and no water to the plant. So the point of all of this is, if you have unregulated pressure water lines stick with the stiffer drip line. If you have the 25 PSI regulators in the line before your soft drip line you can use this stuff with no problems. They have drip conversion kits you can buy (just a bit pricey) which will allow you to regulate anything past the 1/2" riser you have it attached to (for .7" drip hose) and this will work fine also. I've done it this way in several locations where it is practical and it's working great. Bottom line, DON'T use this soft drip line with unregulated water pressure. It will just give you headaches.

Scritto da: dsfenton

Works great

I'd buy again.

Scritto da: Joe D

Correct replacement for what I had.

The line was cut about 10 down the line but did not leak.

Scritto da: John Luiten

Tubing will not hold dripper

Bought this as a very flexible tube which allows easy attachment of emitter.. In that it works well. However, I’ve noticed drip heads popping off repeatedly. Now this is probably my fault. Perhaps I have too much line pressure or the sun and heat in this desert just about melts the lines, but it’s a problem. I’ve taken to gluing on the drip heads which seems to handle the problem. Black vinyl lines don’t seem to have this problem, but of course are harder to attach emitter to.

Scritto da: Hank 62

Matches light Brown mulch

Use to hook up drip sprinkler devices.