Tööstuslikud katsesüsteemid SenSafe 481026 kloorivaba testriba

Brand:Industrial Test Systems

3.1/5

47.61

SenSafe Free Chlorine Water Check testribad on AINULT EPA AKTSEPTEERITUD (avaldatud 2007. aasta föderaalses registris (köide 72, nr 47, esmaspäev, 12. märts 2007, lk 11204, ITS meetod D99-003)), mida kasutatakse joogivee nõuetele vastavuse tagamiseks. jälgimine. Need ühendavad laia valiku veekvaliteedi tuvastamist meie patenteeritud vaba kloori indikaatoriga. Free Chlorine Water Check on loodud vastu pidama monoklooramiinide häiretele ja on ideaalne toode joogivee kvaliteedi testimiseks. SenSafe Free Chlorine Water Check on ideaalne selleks, et teha kindlaks, kas teil on õige kogus desinfitseerimisvahendit või mitte. Lisaks pole veekvaliteedi testi tegemiseks vaja väliseid kemikaale, nii et testimine on kiire, lihtne ja taskukohane.

✅ MADE IN USA KVALITEET: ITS toodab testribatooteid oma USA tehases keskkonnas, mis võimaldab headel tootmistavadel põhinevat reprodutseeritavust, täpsust ja jälgitavust. Kvaliteedikontrolli töötajad testivad komponente igal etapil ja need lükatakse tagasi, kui need ei vasta spetsifikatsioonidele. ✅ TÄIELIK KOMPLEKT: 50 testribaga pudel koos kontrollitud värvikaardi pudeli etiketiga, et värve oleks lihtne sobitada. ✅ USEPA AKTSEPTEERITUD vaba kloori testriba joogivee aruandluse jaoks, mida kasutatakse iga osariigi äranägemisel (ITS-meetod D99-003, mis on avaldatud föderaalses registris). ✅ LIHTNE KASUTADA: ühe kastmise ja lugemise testribade protseduur ning optimeeritud värvikaart muudavad toote ideaalseks nii tehnilistele kui ka mittetehnilistele kasutajatele madala taseme vaba kloori tuvastamiseks vees – ideaalne joogivees, toitlustusteenustes, restoranides ja mujal. joogivesi. ✅ TUVASTAMISTASED: vaba kloor 0,0, 0,05, 0,1, 0,2 0,4, 0,6, 0,8, 1,2, 1,5, 2,0, 2,6, 4,0,> 6,0 ppm (mg/l), mitte kasutamiseks lahjendamata kloori, lahjendamata või kloori pleegitatud lahustes muud kloorivabad lahused. Ei reageeri mõnes veesüsteemis kasutatava kombineeritud klooriga (kloroamiinidega).
Country of Origin USA
Item model number 481026-BU
Manufacturer Industrial Test Systems, Inc.
Product Dimensions 1.5 x 1.5 x 3.25 inches; 1 Ounces

3.1

8 Review
5 Star
58
4 Star
17
3 Star
8
2 Star
4
1 Star
14

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega*

Scritto da: Savage designs
Better than some of the other test strips. But.
I have tested 3 different brands of test strips over a 7 day period and they did not correlate at all. 0.2 to 4.0 That is a huge difference when you are drinking the stuff. If you simply need to check if you have chlorine in your water these will work. If you need a definitive number go with a Taylor chlorine kit instead. For reference: I check my drinking water tanks for free chlorine every morning. When it gets below 0.2, I add 2.5 teaspoons of (drinking water approved) chlorine granules to a 2500 gallon tank. For our water usage, it will last a week before I need to chlorinate the tank again.
Scritto da: mark Romain
Accurate tests every time
Just follow the easy instructions and you will get results. The kit inspires customer confidence.
Scritto da: Jmmy
Great
Easy to use.
Scritto da: Shelby
Lots of duds
I went through 8 of these before getting one that worked. For what it's worth, the ones that did work were accurate.
Scritto da: Roberto
Easy to use and read
Easy test.
Scritto da: Scott
Totally Inaccurate Results
Purchased August 2022 to measure monthly Free Chlorine (TRC) from new septic system install for County Health Department. Always measured zero Free Chlorine, well below minimum required. Spent months with equipment manufacturer and installation contractor trouble-shooting system. Tried several types of chlorine tablets, etc. Finally had independent lab test and free chlorine was 0.99 mg/L. This test kit was defective! And could not return for refund because past the return date.
Scritto da: Todd Humphrey
Very poor accuracy, not trustworthy
I have done at least a dozen test very explicitly following the directions and the results are nowhere near compared to two other test. One test I’m using is liquid with the drops, another is a test strip that you dip. Both of those are indicating over 5 ppm this test is consistently giving .6 to 1.2 ppm. Both my other tests are highly rated for accuracy. They just are not easy to read anything under 2 ppm which is what I’m trying to achieve for my hot tub. I bought two bottles I will be returning one.
Scritto da: Stephen Hill
0 Results For My Tap Water...... Read the Product Discription Carefully
There was a 0 concentration as measured with my tap water.....but I know that my city uses Chlorine / Chloramines per information from my Orange County Calif water department. After reading more carefully the product description..."Does not react with combined chlorine (Chloramines)" Maybe I have Chloramines in my water supply?

Seotud tooted

Avastage meie rahvusvaheline võrgustik

Saadame 28 riiki, üle 200 000 toote. Olge kursis, tellige uudiskiri.

Array