SharkBite 3/4 tolli x 3/4 tolli FIP x 12 tolli roostevabast terasest gofreeritud painduv veesoojendi pistik, suruga ühendatav messingist torustiku liitmik, PEX toru, vask, CPVC, PE-RT, HDPE, SS3088FLEX12LF 3/4 tolli x 3 /4 tolli x 12 tolli

Name: SharkBite 3/4 tolli x 3/4 tolli FIP x 12 tolli roostevabast terasest gofreeritud painduv veesoojendi pistik, suruga ühendatav messingist torustiku liitmik, PEX toru, vask, CPVC, PE-RT, HDPE, SS3088FLEX12LF 3/4 tolli x 3 /4 tolli x 12 tolli
Brand: SharkBite
SKU: 0697285028678
Price: 39.68 EUR
Availability: InStock

Brand:SharkBite

3.6/5

€
39.68

SPECS: SharkBite veesoojendi pistikutel on maksimaalne töötemperatuur 200 kraadi F ja maksimaalne töörõhk 200 PSI; lubatud gaasivee- ja lõõriavaga elektrisoojendite jaoks. EELISTAB PRO: SharkBite'i tööriistad ja liitmikud vastavad samadele kõrgetele standarditele nii äri- kui ka elamute sanitaartehniliste rakenduste puhul; sobib kaubanduslikuks remondiks või koduparandusprojektideks; tagab puhta, lekkevaba ühenduse ja on pliivaba. LIHTNE PAIGALDAMINE: see messingist suruv veesoojendi liitmik vähendab vajadust täiendavate üleminekuliitmike järele; võimaldab kiiret ja lihtsat paigaldamist, ilma et oleks vaja tööriistu, pressida, liimida ega jootma; eemaldage lahtiühendamisklambri või tangide abil. MITMEKÜLGNE: see painduv veesoojendi liitmik töötab hästi PEX-torude, PE-RT-, CPVC- ja vasktorudega. SHARKBITE'I VEESOOJA ÜHENDUS: see kaasaskantav veesoojendi pistik, mis on valmistatud gofreeritud roostevabast terasest, võimaldab ühendada veesoojendid olemasolevate torudega, mis ei lähe kiiresti ja lihtsalt kokku. ideaalne kitsastes kohtades töötamiseks.

Ühikuid pole saadaval

EAN: 0697285028678

Kategooriad Tööriistad ja kodukaubad, Korraline veevarustus, Torud, toruliitmikud ja tarvikud, Torud/voolikud,

Brand	SharkBite
Color	Stainless Steel
Exterior Finish	Brass
Item Dimensions LxWxH	30.5 x 3.2 x 3.2 inches
Material	Stainless Steel,Copper,Pex,Cpvc,Brass
Number Of Pieces	1
Size	3/4 in. x 3/4 in. x 12 in.

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega^*

Teie hinnang

Scritto da: Mikey Mike

These are fantastic

I love Shark Bite Connectors. If anyone tells you they leak, it’s because they didn’t properly put them on. If you seat them properly, they never leak. It is easy to not seat them properly if you’re not careful. There is an orange tool that you can buy that you can slip on to the pipe and you can see how far the shark bite needs to go on. Just slip it on and mark the pipe with a Sharpie. The tool also lets you deburr the end of the pipe. It’s only about $10, but you should have one if you use shark bite connectors. Connect them right and you’ll have no problems.

Scritto da: Paul Singh

Made it a breeze to DIY install a new water heater.

Sharkbite fittings are a no-brainer for novice DIYers. They make it super simple to make connections. I used this one to connect a piece of PEX to the water heater. No need for the 2 or 3 90s. I was able to curve this around the water heater to make the ridiculous cold water connection on the Rheem heat pump water heater which features this connection at the front bottom of the unit instead of the top like all other water heaters.

Scritto da: Thomas B. Ford

Exactly What I Needed

I had to move my hot water heater and was replumbing with PEX. These were the perfect solution and since they are flexible it allows you to move things around a little bit without issues. Extremely simple to install, I just put some teflon tape on the threads of the hot water heater and the PEX just slides in. Highly recommended.

Scritto da: dorothy m troup

just the right type for this application, very good quality.

thank you for being so understanding about returning this item. The first set were the incorrect for this application and these flexible hoses were the right item. BUT...when the plumber came to install, replacing a new hot water heater was not the issue, yahhhhh but a leaking condensation line which drained into our overflow pan under the water heater. Thank you for making it so easy to return these fittings.

Scritto da: Kris Paul

Works like a dream!

Install could not have been easier. Used a pipe cutter, reamer, and marked the install depth, went right on and does not leak!

Scritto da: Jimmy Chiu

DIY ez install.

We have the older version of the sharkbite connector. The inner wall of the connector broke down and we started to see little pieces of black substances. This is the improved version. It’s not as flexible as the previous version. It takes a bit of work to get this on and adjust.

Scritto da: K. Barnes

Sharkbite water heater hosers

Pain in the arse to install ???? hopefully I won't have to worry about changing them again. I couldn't get the previous sharkbites off, so I had to cut it off.

Scritto da: REV

It's a SharkBite...

SharkBites aren't cheap, but are super easy and seem to either leak or hold from the start. I ended up having one of these leak, but it was just a matter of popping the old one off, new one on, and everything has been good. I did remove the insert as I was dealing with copper. If you want a "plug and play" option for your water heater, these are great, but you do pay a premium.

Scritto da: Renza

Easy Installation

Very well made, high quality stainless, easy to curve with no kinking and no need for teflon or thread paste. If you haven't used SharkBite or corrugated connectors before, a few tips. Selecting a longer connector than your measurements will allow you to make larger loops which are easier to maneuver than short tight bends. Also don't forget to clean your 3/4" copper pipe on the SharkBite end and put a mark at 1 1/8" in. When you're ready to make the connection I suggest pushing the SharkBite end first all the way to your mark and then make the connection on the tank side. A final note if you've never used SharkBite connectors, the loose white plastic sleeve inside the end connector should be removed (long nose pliers work fine).

Scritto da: Cathy

Glad Amazon has the 3/4x3/4x12 size

I am so glad that Amazon carries the ¾” x ¾” x 12” Corrugated Stainless Steel Hose. I could not find the 12” anywhere else, and I bought two of the hoses to replace my water tank flex hoses. After two weeks of waiting, the original order was lost somewhere. Thanks for Amazon customer service. Sent me a second package, and received it in one week. The hoses are good. There is no leakage after a month of usage. However, my Sharkbite ¾” disconnect tong does not work on these hoses. The hose is too big to fit in the tong.

Scritto da: SnowSquirrel

Easy to install

By using this corrugated connector eliminated additional elbows and other plumbing parts, took the guess work out of the installation process. Also not soldering or crimping of joints, just push-in and screw-on for peace of mind result, no leak no mess!

Scritto da: Amazon Customer

Was ok

Hard to bend and keep its shape, but did the job. Have prime and was supposed to get it in two or three days but was almost a week late.

Scritto da: Cam2019

Good product but needed Teflon tape

One of the 2 I bought was leaking at the threads despite tightening. Plumbers tape took care of the leak but it shouldn't have happened in the first place.