0
0

Kokku:€ 0.00

Vaata ostukorviKassasse
LoginRegister
0

Kokku:€ 0.00

Vaata ostukorviKassasse
LoginRegister

Shark CORP 21-2030 karastatud terasest sulamist naelatõmbajad

Brand:Shark Corp

3/5

€
62.42

TOOTE KIRJELDUS Jaapani ''''Cat's Paw''''-tüüpi küünetõmbajad on olnud professionaalsete kapimeistrite ja puidutööliste valik juba aastaid, kuna need on nii tõhusad ja hõlpsasti kasutatavad. Pneumaatiliste naelte leviku tõttu on väga oluline, et teie tööriistakomplektis oleks ehtne Shark käepidemega küünetõmbaja. Pneumaatiliste küünte pead kipuvad olema nõrgad, mis murduvad või lõikavad ära, kui proovite neid peast välja tõmmata. Shark grip küünetõmbajad tõmbavad aga küünevarrest, mitte peast. Tööriista (A) karastatud ''''V'''' hammustab kindlalt ja positiivselt küünevarre. Eemaldamine on kiire. Tõmburi (B) alumine külg on kõver, nii et seda saab hõlpsasti puitu kaevata ja naelapea alla libiseda – või ilma peata naela varre. Tõmburi (C) tagakülg on loodud teie haamri löökpeana, et see toiming oleks veelgi lihtsam. Sharkgrip Pry latid on turul kõige õhemad lamedad latid. Tööriist on kombineeritud naelatõmbeseade ja see sobib suurepäraselt vormide eemaldamiseks ilma ümbritsevat seina ega vormi ennast praktiliselt kahjustamata. Selle üliõhuke disain laseb sellel libiseda kõige kitsamatesse pragudesse, mida ette kujutada saab. See sobib suurepäraselt akende ja uste joondamiseks paigaldamise ajal, vaibaribade ja klambrite eemaldamiseks. See toimib isegi mitmeotstarbelise kaabitsana. AMAZON.COM SharkGrip naelatõmbur eemaldab kergesti isegi sisseehitatud, ilma peata või roostetanud naelad. See hammustab küüne mis tahes osa, ilma et oleks vaja täiendavat hooba. Täiustatud karastamismeetod selle naelatõmbeseadme tilk-sepistatud ehitusprotsessis annab sellele täiendava vastupidavuse, et vältida lõhenemist või paindumist. See tõmbur on 11–3/4 tolli pikk, et naeltega kokku puutuda. TOOTJALT SharkGrip küünetõmbajad eemaldavad isegi sissetunginud, ilma peata või roostes küüned. Täiustatud karastamismeetod selle naelatõmbeseadme tilk-sepistatud ehitusprotsessis annab sellele täiendava vastupidavuse, et vältida lõhenemist või paindumist. 11-3/4 tolli viimistletud naela (2-1/2 tolli kuni 3 tolli), hariliku naela (2 tolli kuni 3-1/2) ja rõngasvarre jaoks. Näe rohkem

Summa
Lisa ostukorviOsta kohe

EAN: 5915903759083

Kategooriad Tööriistad ja kodukaubad, Elektri- ja käsitööriistad, Käsitööriistad, Naelatõmburid,

Kaalub tarnitud 1,1 naela. Ideaalne 2-1/2 kuni 3-tolliste küünte eemaldamiseks. Langenud sepistatud konstruktsioon; kroomvanaadiumi viimistlus. Eemaldab isegi sisseehitatud, peata või roostetanud küüned. Vastupidav ja tõhus küünetõmbaja isegi kõige tõrksamate küünte eemaldamiseks. Pneumaatilistel küüntel on tavaliselt nõrgad pead, mis voldivad või nihkuvad ära, kui proovite neid peast välja tõmmata. Eriti seoses pneumaatiliste naelutajate levikuga on oluline, et teie tööriistakomplektis oleks ehtne Shark Grip naelatõmbur. Shark Grip Jaapani ''''kassikäpa''''-tüüpi naelatõmbajad on olnud professionaalsete kapimeistrite valik.
Batteries Included? ‎No
Batteries Required? ‎No
Country of Origin ‎China
Customer Reviews 3.9 3.9 out of 5 stars 38 ratings 3.9 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item model number ‎21-2030
Item Package Quantity ‎1
Item Weight ‎1 pounds
Manufacturer ‎Shark Corporation
Package Dimensions ‎13.9 x 11.3 x 1.6 inches
Part Number ‎21-2030
Power Source ‎hand_powered
Size ‎Pack of 1
Warranty Description ‎1 year

3

8 Review
5 Star
62
4 Star
10
3 Star
0
2 Star
13
1 Star
16

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega*

Scritto da: Tim Bowrey
From a Tool Snob
I was looking for a replacement cat's paw after my Exhumer was showing some signs of serious abuse and rust. I decided to go with this particular cat's paw after hearing some good things about the company and was even told by some people that it was the 2nd best cat's paw out there (Stiletto being the best, supposedly). Well... I couldn't afford a Stiletto so I decided to give this guy a try. My use is mostly rough carpentry, including framing, trusses, and decking. I'm mostly pulling 8d and 12d (a few 16d) nails, and the spacing on the two ends seems to be perfect for that. I like how it grabs the nails but it lacks slightly in weight (I'd actually prefer it to be a little heavier) and it doesn't have a punch to dent the wood around the nails for a cleaner removal. The punch (found on the Exhumer and the Stiletto) is only a minor flaw since I don't get bonus points for making the wood pretty in my uses. Overall, I'd rate this about equal to my Exhumer. If they had babies and made a "Sharumer" (sounds German?), that would be a heck of a cat's paw. Either way, I switch between this cat's paw and my Exhumer depending on what kind of mood I am in or whether I had a big lunch. Another benefit of this cat's paw is the finishing. I've abused this cat's paw quite a bit already and the paint still hasn't chipped. Once the paint starts chipping and I get some work in the rain, I'll let y'all know how it holds up. Pros: - Good grabbing skills - Lightweight - Nice finish and paint Cons: - A little too lightweight for my likings - I wouldn't mind it being maybe 3/4" longer, maybe - Nail punch to put dents around nails for clean removal
Scritto da: Richard B. Strachan
Keep looking..
Steel is brittle where it was "hardened", already chipping and I've used it a handful of times.
Scritto da: David
Well hardened steel- truly a rare find nowadays. Worth the money.
The best steel out there in cats paws. Explains why you can't get them at the big box stores- way too high quality. However, I can't find use for the ultra wide jaw opening, you could pull a lag bolt with it. Problem is, makes it a lot more mess and effort going in for a buried gun nail, and that nail head can duck right through the gap as you drive right on by :-)
Scritto da: Markie Twain
Great tool to have
I find myself using this little tool all the time. It fits easily in my tool bucket and it is quite solid and sturdy. Great lever action and will rip up even the nails with the little heads on them. I also carry a flat bar, which is another indespensable tool, but this thing is nice to have due to the cat's paw digging action you can achieve to get out those embedded nails. If the nail is long, I find myself putting a piece of wood under the tool for additional prying action. All in all a great tool that will last and you can rely on.
Scritto da: Erik Tamai
My nailpull
The steel on this thing is HARD which means to me that the claws on these things stay sharp and ready to dig into whatever I want. That being said the harder the steel the more brittle it gets, so wear protective gear when putting the nuts to it. I personally have never shatter one but I've read it does happen from time to time. I love it though great shape design and length, if you only have one nail pull get this one you will not be disappointed.
Scritto da: Teahupoo
Good enough
NOt as good as the original shark puller that had 300 hundred Japanese steel,but the best option on the market.
Scritto da: Charles Gravel
king of all cats paws
I bought this cat paw after my old stanley got to wide at the claws and this is a beast of a tool. it is longer than a normal one and this gives you more leverage which is very nice. pulls gun nails out very easily. if your a framer or carpenter this will be a new favorite tool. also check out their flat bar which i bought before this, also a really good product.
Scritto da: kris
While I like the size and design of this brand of nail ...
While I like the size and design of this brand of nail puller aka "cats paw", they are ultimately junk. Have had two different sizes and they both broke a tooth, just doing what they are supposed to do..pull nails..literally astounded as to how one claw just breaks off...and for twenty something dollars spent on the last one couldn't be more disappointed. the design is nice but if you want something reliable stick with a stanley, not that I've ever bought one but that's what I always end up borrowing when I need one that works

Seotud tooted

hot
Ülesanne T47044 Küüntetõmbaja
0.1/5

€ 42.73

Ülesanne T47044 Küüntetõmbaja
0.1/5

€ 42.73

hot
TITAN 10 küünetõmbajas (12209) küünetõmbaja ja vormimisvarras
2.7/5

€ 39.82

TITAN 10 küünetõmbajas (12209) küünetõmbaja ja vormimisvarras
2.7/5

€ 39.82

hot
Dead On Tools EX9CL 10-5/8-tolline Exhumer küünetõmbaja, hõbedane
3.7/5

€ 60.01

Dead On Tools EX9CL 10-5/8-tolline Exhumer küünetõmbaja, hõbedane
3.7/5

€ 60.01

hot
PacTool RS501 katusemadu tööriist - Sindli tõmbevarras - Tugev küünte eemaldamise tööriist - Katusesindli eemaldaja - Professionaalsed katusetööriistad Küüntetõmburid
3.7/5

€ 60.54

PacTool RS501 katusemadu tööriist - Sindli tõmbevarras - Tugev küünte eemaldamise tööriist - Katusesindli eemaldaja - Professionaalsed katusetööriistad Küüntetõmburid
3.7/5

€ 60.54

hot
Shark CORP 21-2028 karastatud terasest sulamist naelatõmbajad
3.1/5

€ 51.46

Shark CORP 21-2028 karastatud terasest sulamist naelatõmbajad
3.1/5

€ 51.46

hot
Tool Aid S&G (87820) Tack Puller
3.9/5

€ 40.23

Tool Aid S&G (87820) Tack Puller
3.9/5

€ 40.23

hot
Mayhew Tools 17353 vasarata tööriist, nr 2 2/32 küünte starter ja nr 3 3/32 küünte komplekt
3.5/5

€ 37.70

Mayhew Tools 17353 vasarata tööriist, nr 2 2/32 küünte starter ja nr 3 3/32 küünte komplekt
3.5/5

€ 37.70

hot
Shark Corp 21-2020 7-5/8-tolline küünetõmbaja (1 tk)
3.3/5

€ 43.46

Shark Corp 21-2020 7-5/8-tolline küünetõmbaja (1 tk)
3.3/5

€ 43.46

Avastage meie rahvusvaheline võrgustik

Saadame 28 riiki, üle 200 000 toote. Olge kursis, tellige uudiskiri.

Array

Kokku:€ 0.00

Vaata ostukorviKassasse

Kategooriad

Kõik kategooriad
Menüü Kategooriad Lähedal Käru

Menu