Panther Marine 55-0410 päramootori 4-taktilise mootori lisaklamber – 10

Name: Panther Marine 55-0410 päramootori 4-taktilise mootori lisaklamber – 10
Brand: PANTHER MARINE
SKU: 0836125004100
Price: 605.50 EUR
Availability: InStock

Brand:PANTHER MARINE

3.4/5

€
605.50

Reguleerige oma trolli- või abimootor 5 vertikaalsesse asendisse mudelil 55-0410 ja 4 asendisse mudelil 55-0416, et muuta vee- või koormustingimusi. Anodeeritud alumiiniumist kronstein on ehitatud vastu pidama tänapäevase neljataktilise pika või lühikese võlliga suurema kaalu ja pöördemomendiga. Käsitsi, vaid nuppu keerates reguleeritavad roostevabast terasest torsioonvedrud tasakaalustavad mootori raskust, muutes reguleerimise imelihtsaks – samas kui 2 paksust eriti laia kinnitusplaati koos lennukitüüpi roostevabast terasest riistvaraga tagavad suure jõudluse. Saab hakkama kuni 35 hj, 263# mootoriga, 16 käiguga. Vastab ABYC standarditele.

Summa

Lisa ostukorvi Osta kohe

EAN: 0836125004100

Kategooriad Sport ja vabaõhu, Sport ja fitness, Purjetamine ja purjetamine, Paadid ja varustus, Veesõidukite mootorite osad, Pardamootori klambrid,

Käepidemed kuni 35 hj, 263 naela. 10 käiguga mootorid. Sobivuse tüüp: universaalne. Anodeeritud alumiiniumist kronstein on ehitatud nii, et see talub tänapäevaste neljataktiliste pikkade või lühikeste võllide suuremat kaalu ja pöördemomenti. Reguleerige oma trolli- või abimootor viiele vertikaalsele tööasendile, et muuta vee- või koormustingimusi.

Brand	PANTHER MARINE
Brand	‎PANTHER MARINE
Country of Origin	‎China
Customer Reviews	4.4 4.4 out of 5 stars 99 ratings 4.4 out of 5 stars
Engine Type	4 Stroke
Item model number	‎55-0410
Item Weight	19 Pounds
Item Weight	‎19 pounds
Manufacturer	‎MarineTech Products
Manufacturer Part Number	‎55-0410
Model	‎CMP GROUP LTD.
Product Dimensions	‎23.74 x 12.24 x 9.49 inches
Recommended Uses For Product	For Salt Water

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega^*

Teie hinnang

Scritto da: Cathy

Needs weight to lower mount

People were complaining about bracket not being able to move. One person loosened all the bolts to get bracket to release. I hung three 30 lb anchors on mine to replace the weight of 9.9 Honda. Bracket works as advertised. No loosening of anything. The spring is heavy duty. It won’t give with no weight. Ready for the lakes

Scritto da: Fredric

Doesn’t work out of box.

I have decades of daily experience installing all kinds of gear. This is worst new product experience this year. Product had yet to kill anyone. Nice that holes line-up with existing bolt holes on transom. Our transom in near vertical so lack of angle adjustment on this product is fine. Product looks strong but will not move with over 200 pounds downward force: EVEN AFTER LOOSENING ALL PIVOT BOLTS. Plus ensuring handle is fully released and saftey catch is out of the way. Instructions caution against disassembly because of high force on springs. Seems like factory put this together with press fit. As other review said — somebody needs to be fired, at least. Finally able to operate after getting another person to help pull down, and working it back and forth. Also needed to move washers on handle. Seems like it will be more rigid in use, than similar products once broken-in.

Scritto da: courtney

Exactly as Advertised

Exactly what i needed, mounted up great to my boat and works brilliantly.

Scritto da: Wayne Tjoelker

Loosen all bolts!

I was so disgusted with this product because it simply did NOT work. Finally deciding to tear it apart, I started un-doing ALL bolts and nuts. It finally worked, loosy--goosy with a lot of WD-40.! You have to tune this product to your own needs.

Scritto da: Jon O

Worked as expected

Replaced an older worn out one.

Scritto da: Leona P. Graham

This is a good one

Ordered this lift to replace old lift that collapsed while we were going down the highway. The Panther lift is well made and installed in the existing holes. We did have a problem with the lift not moving up or down after it was installed. Called Panter Marine and their tech guy told us this is a problem they see from time to time. He told us the lift was the correct one for our outboard and to force it down. So we used a pry bar in between the scissor part of lift. It broke lose and went down and up with ease. It now works perfectly.

Scritto da: Avid customer

Very well made

This unit is very well made and not done with cheep materials. It does exactly what it is designed for and the installation was easy to do. I added the panther remote to it and all works wonderfully. PS the spring system is strong but works exactly like it should when it is installed on the boat

Scritto da: paul

Panther Kicker Bracket

This bracket overall is solid and I would definitely buy it again. The cons is that it is made to mount onto a transom that is vertical, my transom is slightly angled (20 Proline Walk i/o) so when the engine in mounted the weight pulls the top of the mounting plate backwards and the bottom of the mounting plate forward binding the two parallel bars so the bracket does not lower. When I lower it I have to trim the kicker so that the weight does not cause the bars to bind. Additionally the bracket is designed to mount so that the handle is above the transom. If the bracket is mounted where the transom is higher than the top of the mounting board the handle/lever will not be able to be fully actuated. I had to modify the handle by cutting it about 3/4 inch and re-drilling it to allow the handle to be fully actuated. Would be nice if the design of the handle was slightly bent to rearward or towards the engine mounting board.