OTC (522 suur hammasratas ja rihmaratta tõmmits

Brand:‎NOCO

3.8/5

135.08

OTC 522 suure hammasratta ja rihmaratta tõmmitsaga saate hõlpsasti eemaldada laias valikus hammasrattaid, rihmarattaid või muid keermestatud aukudega osi. Seda on lihtne kasutada ja seda on lihtne säilitada. Väärtus on börsiväliste tööriistade ja seadmete portfelli keskmes. Olenemata sellest, kas tegemist on lihtsa remondiga või kõige keerulisema juhitavusega, lahendavad need auhinnatud tööriistad üldiselt probleemid kiiremini ja parema hinnaga kui ükski teine ​​saadaolev tootesari. Olenemata sellest, kas see on spetsiaalne tööriist või ainulaadne hooldusseade, pakub OTC parimaid lahendusi kaasaegsetele autoteeninduse väljakutsetele, suurendades samal ajal tehnikute tootlikkust ja kaupluste kasumit.

EAN: 0031113145821

Kategooriad Autotooted, Tööriistad ja seadmed, Tõstukid, Puller Sets,

Sarnane Ford D80L-522-A ja 303-D025-ga. Mahutab kõik kuni 1/2 tollise läbimõõduga korkkruvi. Sundkruvi on 3/4 tolli kuni 16 x 11-5/8 tolli pikk. Laius 2 tollist 7-3/4 tollini; plokk on 8-1/4 tolli lai. OTC 522 suure hammasratta ja rihmaratta tõmmitsaga saate hõlpsasti eemaldada laias valikus hammasrattaid, rihmarattaid või muid keermestatud aukudega osi.
Brand ‎NOCO
Country of Origin ‎USA
Customer Reviews 4.7 4.7 out of 5 stars 363 ratings 4.7 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item model number ‎522
Item Weight ‎4.1 pounds
Manufacturer ‎OTC
Manufacturer Part Number ‎522
Model ‎OTC
OEM Part Number ‎522
Product Dimensions ‎3.1 x 2.2 x 13.2 inches

3.8

13 Review
5 Star
86
4 Star
8
3 Star
3
2 Star
1
1 Star
2

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega*

Scritto da: Amazon Customer
geat tool
good tool
Scritto da: KSBird2005
Tough.
This is a great option for pulling motors and gearboxes off of shafts. Using gear pullers never worked well for this application due to uneven shapes and lack of grab area. With this I can just grab a couple bolts and pull off very stubborn motors.
Scritto da: F. Rotello
Good Puller
I read some of the 1 star reviews and honestly I can not see what they were complaining about. This tool cost me $60 and is WAY better than a $10 one you buy at "China-Tools-R-Us"... if you get my meaning. The Tool is square and the bore is straight, NONE of the $10 pullers will share those traits. Yes the threads are a little rough, however all you have to do is put a little oil on the threads and spin the extractor rod all the way through and it will smooth it out. If you want flawless go buy an Enerpac a $200 to $300, that's what my Industrial service company uses. Otherwise your lawnmower flywheel will never know the difference. This is a great tool for a homeowner or auto shop.
Scritto da: Amazon Customer
Must have tool
I use this puller for all sorts of task.
Scritto da: Mike Asher
Heavy Duty Gear puller
I attached this puller and about 1 good Complete turn it literally jumped off the shaft
Scritto da: Scott Whitehead
Good puller.
Cheaper than Snap-On and seems to be the same quality. I use it at least once a week pulling differential yokes on tractor trailers to do pinion seals.
Scritto da: Gary E. Hoenig
Did the tough job
Did the tough job after I had tried everything else. Glad to have this tool in my arsenal.
Scritto da: Matthew Rushing
Indestructible puller
Used it to pull the blade holder assembly off a 285 Bush Hog mower. Had tried everything, even a 12 ton hydraulic puller wouldn't budge it. Rigged this up to it using a couple of Grade 8 1/2 inch bolts, using a 1 inch air hammer (this thing has like 2500 lbs. of torque), heat, and a 10 lb. maul finally broke it loose. Bent the bolts, pulled the 1/2 inch nuts right off the threads, but this puller didn't break and to my amazement the puller bolt didn't even bend. Best 50 bucks I ever spent.
Scritto da: MCatSHF
100%!!! HAPPY HAPPY HAPPY!!! Exactly as described, priced right & fast shipment.
100%!!! HAPPY HAPPY HAPPY!!! Exactly as described, priced right & fast shipment.
Scritto da: Amazon Customer
great tool
right tool for the job. worked great time saver
Scritto da: Randy Frattinger
Good Quality
The tool is as described and works great.
Scritto da: Evan
Works well
Performed as needed. Would be nice to have a swivel end on the threaded rod
Scritto da: Doug Burton
Built for tanks
Wow.... what a beast. If this doesn’t work. Nothing will...

Seotud tooted

hot
Lisle 39000 rihmaratas
3.7/5

€ 106.35

Lisle 39000 rihmaratas
3.7/5

€ 106.35

hot
Lisle 40100 rummu eemaldaja, must
3.7/5

€ 176.36

Lisle 40100 rummu eemaldaja, must
3.7/5

€ 176.36

Avastage meie rahvusvaheline võrgustik

Saadame 28 riiki, üle 200 000 toote. Olge kursis, tellige uudiskiri.

Array