Ostjad Tooted 1804055 Polt-On Receiver Tube must 2 tolli

Brand:Buyers Products

3.8/5

129.63

Vastupidav ja töökindel: 1946. aastal asutatud ettevõttest Buyers Products on saanud veokite seadmete tööstuses liider, kuigi oleme pühendunud klienditeenindusele, innovatsioonile ja väärtusele kogu meie tootevalikus. Me teeme asju õigesti: kujundame tooteid nii, nagu ehitame neid endale, sest me seda olemegi. Meie meeskonnas töötavad insenerid ja eksperdid, kes teavad, kuidas muuta toode erakordseks. Rohkem kui lihtsalt osad: alates lume- ja jääseadmetest kuni tööriistakastideni, hüdraulika, pukseerimisseadmete, veoautode ja haagiste riistvarani kuni meie uuenduslike valgustustoodeteni – see on hämmastav, mida ostjatooted teie veoauto heaks teha saavad. Vastupidav ja mitmekülgne: see 2-tolline vastuvõtja toru on 6 tolli pikk ja keevitatud 1/2-tollise terasest kinnitusplaadi külge ning kinnitatakse hõlpsalt mis tahes haakeplaadi külge, millel on standardsed 5/8-tollised tihvtikonksu augud. Polt on vastuvõtja toru: see korrosioonikindel, poltidega kinnitatav vastuvõtja toru, mis kaalub kuni 20 000 naela MGTW, võimaldab pukseerimisel paindlikkust lülituda kuulkonksult tihvtkonksule; Paigaldamiseks on vaja ostjate toodete riistvarakomplekti 8520 (müüakse eraldi).

Vastupidav ja töökindel: 1946. aastal asutatud ettevõttest Buyers Products on saanud veokite seadmete tööstuses liider, kuigi oleme pühendunud klienditeenindusele, innovatsioonile ja väärtusele kogu meie tootevalikus. Me teeme asju õigesti: kujundame tooteid nii, nagu ehitame neid endale, sest me seda olemegi. Meie meeskonnas töötavad insenerid ja eksperdid, kes teavad, kuidas muuta toode erakordseks. Rohkem kui lihtsalt osad: alates lume- ja jääseadmetest kuni tööriistakastideni, hüdraulika, pukseerimisseadmete, veoautode ja haagiste riistvarani kuni meie uuenduslike valgustustoodeteni – see on hämmastav, mida ostjatooted teie veoauto heaks teha saavad. Vastupidav ja mitmekülgne: see 2-tolline vastuvõtja toru on 6 tolli pikk ja keevitatud 1/2-tollise terasest kinnitusplaadi külge ning kinnitatakse hõlpsalt mis tahes haakeplaadi külge, millel on standardsed 5/8-tollised tihvtikonksu augud. Polt on vastuvõtja toru: see korrosioonikindel, poltidega kinnitatav vastuvõtja toru, mis kaalub kuni 20 000 naela MGTW, võimaldab pukseerimisel paindlikkust lülituda kuulkonksult tihvtkonksule; Paigaldamiseks on vaja ostjate toodete riistvarakomplekti 8520 (müüakse eraldi).
Brand Buyers Products
Brand ‎Buyers Products
Country of Origin ‎China
Customer Reviews 4.7 4.7 out of 5 stars 393 ratings 4.7 out of 5 stars
Exterior ‎Painted
Finish Type Powder Coated
Is Discontinued By Manufacturer ‎No
Item model number ‎1804055
Item Weight 7.8 Pounds
Item Weight ‎7.8 pounds
Manufacturer ‎Buyers Products
Manufacturer Part Number ‎1804055
Material Alloy Steel
Model ‎1804055
OEM Part Number ‎1804055
Product Dimensions ‎6.25 x 5 x 6 inches
Vehicle Service Type Truck, Trailer

3.8

13 Review
5 Star
86
4 Star
8
3 Star
3
2 Star
1
1 Star
2

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega*

Scritto da: Gregory P.
Exactly what I needed
Saved a lot of money buying on Amazon vs the local shop!
Scritto da: Lawrence B. Pedrick
This receiver tube could use an additional set of bolt-holes.
My only complaint is that this is not drilled for the "standard pintle 4-bolt" pattern, since there are more than one "standard". If you buy this for your passenger truck you will likely need to drill holes! More about that below. First off, the quality seems good, the powdercoating seems to be durable and the unit seems overall to be very heavy duty. I bought this for my '92 Toyota Land Cruiser with the drilled rear bumper, for light duty use such as a cargo or bike rack. I had originally considered theJohn Deere Gator Front or Rear KFI Receiver Hitch but that seemed too lightweight since it does not have a collar, and I wanted to keep the option of towing a heavier trailer if necessary. I should have looked more closely at the product description and photos, and checked the previous reviewer (who had to drill holes) before buying this. I would have realized the bolt pattern on this is obviously different from my truck. However I read it was for a pintle bolt pattern so I pulled the trigger. There are several different pintle bolt patterns. First is the pattern you will find on most passenger trucks such as Toyota Land Cruiser, Land Rover or mil Chevy, whose bolts are vertically 1-3/4" apart. When you step up to the 30-ton units the bolt-holes are vertically 4-1/2" apart. These are the much heavier pintles you probably find on seriously heavy military and utility trucks, and this is the pattern this Buyers unit is drilled for. This makes even less sense when you consider this mount is only rated to 10-tons. Buyers could solve this by drilling an extra set of holes 1-3/4" below the top holes to allow for the option of using it with either bolt pattern. That would get a five-star rating from me, but with this problem I can only give three. I am still hesitant to go with theJohn Deere Gator Front or Rear KFI Receiver Hitch , and if I keep this Buyers unit I will have to have it drilled (since I don't have a drill press) before I can use it. Unfortunately, for my application this model seems to be the only game in town. I am sure I will be happy with it once it is mounted up.
Scritto da: Anna
Drilled for hitch plate, not pintle.
Just installed this item. It looks like washers will not fit with the welds in the picture, but standard washers fit mine fine. Buyers is a good brand. The holes do not bolt into pintle, this is drilled to fit onto a hitch plate (like the back of a dump truck and sometimes flatbeds). Looks like it should hold up longer than my truck will.
Scritto da: Andrew Ryan
It’s great!!!
I pull a trailer daily and it holds up great
Scritto da: -Dan-
Fit great on back of flatbed
This worked great to use in place of the pintle hitch on the recently purchased shop flatbed. The pintle hitch is great for heavy loads, but we needed to be able to pull a variety of trailers with different ball sizes as well as trailer tongue heights and don’t have a trailer with a pintle hitch. This hitch says it’s rated for 20,000 pounds trailer weight and 2,000 pounds tongue weight, both of which are higher than we would tow with it. It bolted directly to the holes on the back of the knapheide flatbed that the pintle hitch had been bolted to before. Can’t get much easier than that.
Scritto da: Lawdog
Well made product.
I would definitely buy again.
Scritto da: Thomas Jones
No hardware included.
I was really disappointed when it came with no mounting bolts, washers and nuts and no backing plate. Now I have to go to the hardware store or Home Depot and go through the process of elimination to get the bolts, washers and nuts and mounting it without a backing plate is not what I anticipated. Consequently I haven't been able to mount it or see how it will function yet...
Scritto da: Vincent Cutler
Heavy Duty
I’d give it 4.5 stars. Seems pretty heavy duty but the receiver bar rattles in it a little more than I would like. I’m sure it doesn’t affect the performance of the product but may be a little annoying rattling down the road. Having said all that I would buy it again because it seems like a commercial grade product.
Scritto da: Amazon Customer
Great item!
No problems
Scritto da: Derek Bremner
Fits Great on my Trucks rear hitch plate.
Does it’s job
Scritto da: MilkMan
love it
super easy install for RV. It’s nice chuck of solid steel. There’s no weight rating, but it should be more than enough for some light duty use.
Scritto da: Cam
Skookum
Sturdy Construction, Arrived quickly and as expected. Only complaint is that some welds may not allow for washers in-line with the mounting holes.
Scritto da: George Nielsen
Sturdy
Replaced pintle hitch on deck. Drilled 2 new holes.

Seotud tooted

Avastage meie rahvusvaheline võrgustik

Saadame 28 riiki, üle 200 000 toote. Olge kursis, tellige uudiskiri.

Array