CURT 45006 poltidega 2-tolline ATV, UTV haakekonks vastuvõtja adapter

Name: CURT 45006 poltidega 2-tolline ATV, UTV haakekonks vastuvõtja adapter
Brand: CURT
SKU: 0612314002030
Price: 82.91 EUR
Availability: InStock

Brand:CURT

3.4/5

€
82.91

ATV-ga kaasnevat vabaduse- ja seiklustunnet pole midagi sarnast. Mudas keerlemine, metsarajal liikumine või lihtsalt hirveväljaku juurde tagasi sõitmine – kõikjal, kus teile meeldib sõita, tunnete ATV-sõidu põnevust. CURT ATV pukseerimistooted võimaldavad teil maksimeerida ATV kogemust, pakkudes teile funktsionaalset varustust, mis on ehitatud kestma. CURT poltidega kinnitatav ATV-adapter on multifunktsionaalne seade, mis aitab teie ATV-st maksimaalselt ära kasutada. Adapter kinnitatakse lihtsalt kaasasoleva riistvara abil ATV keele külge ja pakub 2 x 2 vastuvõtjatoru ava, et kinnitada kuulikinnitusvarre või mõni muu pukseerimistarviku. CURT poltidega ATV-adapteril on rihmarõngas, mis on keevitatud otse selle raami külge, mis annab tugeva kinnituskoha pukseerimisrihmale või -köiele, ning sellel on ka stabiliseerimisplaat, mis hoiab adapterit ja sellele järgnevat koormust reisi ajal kõikumise ja pöörlemise eest. See on valmistatud kvaliteetsest terasest ja on täpselt kokku keevitatud. Katame CURT ATV kuulkinnitusadapteri läikivmusta pulbervärviga, et tagada pikaajaline rooste, kriimustuste, mõranemiste ja UV-kahjustuste vältimine. Ükskõik, milline on teie valitud maastikusõiduk – neljarattaline, neljarattaline, kolme- või neljarattaline –, andke endale CURT ATV pukseerimistoodetega eelis.

Summa

Lisa ostukorvi Osta kohe

EAN: 0612314002030

Kategooriad Autotooted, Emberkauba tarvikud, Pukseerimistooted ja vintsid, Koormakinnitused, Vastuvõtjad,

KORROSIOONI KINDEL. Pikaajaliseks kaitseks elementide eest on see ATV haakeseadme vastuvõtja kaetud vastupidava musta pulbervärviga. SUUR TUGEVUS. See ATV vastuvõtja konks on valmistatud ülitugevast terasest, et tagada töökindel pukseerimine. EXTRA D-RÕNGAS. Sellel ATV veokonksu vastuvõtjal on peal keevitatud D-rõngas, millega saab kinnitada pukseerimisrihma, veokonksu, keti või köie sirgjooneliseks tõmbamiseks. EI PÖÖRD. Sellel ATV haagisekonksu adapteril on sisseehitatud pöörlematu alus, mis lukustub poldi pingutamisel ATV keele külge. See aitab kõrvaldada haakeseadise külgmised lõtkud. MITMEKÜLGNE VASTUVÕTJA. See ATV haakekonksu adapter poltidega ATV haakekeele külge ja varustab selle standardse 2-tollise x 2-tollise vastuvõtjaga, et kinnitada mitmesuguseid tarvikuid erinevat tüüpi ATV pukseerimise jaoks.

Brand	CURT
Brand	‎CURT
Country of Origin	‎USA
Customer Reviews	4.3 4.3 out of 5 stars 1,630 ratings 4.3 out of 5 stars
Exterior	‎Gloss Black Powder Coat
Finish Type	Powder Coated
Is Discontinued By Manufacturer	‎No
Item model number	‎45006
Item Weight	4.3 Pounds
Item Weight	‎4.3 pounds
Manufacturer	‎Curt Manufacturing
Manufacturer Part Number	‎45006
Material	Alloy Steel
Model	‎ATV Tongue Adapter
OEM Part Number	‎45006
Product Dimensions	‎6 x 5 x 4 inches
Vehicle Service Type	ATV, UTV, Trailer

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega^*

Teie hinnang

Scritto da: Kayla Goacher

Works like a charm

Pills my trailer excellently well. Love this

Scritto da: Andy

Has a downward tilt.

Bolts on easy. Put it on my 05 Kawasaki Brute Force 650. Might just be my machine but the receiver hitch installed in this product tilts downward. It's not terrible, but bad enough that I need to remove my hitch pin if I'm running trails or I'll break it off, which I did once.

Scritto da: TexasChris

Handy as a pocket knife.

By handy, I mean this thing can allow you to do a lot of things with your ATV. I do agree with some of the concerns, you need to watch out for how it can swivel; there is a bracket included to help with this. To be honest, I don't know what kind of bolt-on, universal design would help this much more than what is included. You can always tack weld it- but for out of the package use, this thing was up and usable in no time. Do not try and change the ball on your receiver while it is in this thing... I have to change/tighten receiver hitches while it is in my truck receiver. The force of a wrench will turn this puppy in no time. Please note that if your receiver accessory/hitch is not angled at the back, it will probably hit the bolt and not clear for your pin. This is the one problem area- one that could put you in a bind if you have more than a hitch to put on. The reece 2" receiver hitch I have works great because it has a 45 degree angle in the rear. The straight cut, 2" receiver hitch I have (I do not see a brand) does NOT fit. I have this mounted on a polaris ATV. I don't see why it would not work on any ATV that has a place to put a hitch. This helps me to pull trailers because I actually have a 6X6, Polaris Magnum. Without a receiver, I easily hit my tires when making a turn. This puts the trailer a little further back, between the adapter and the actual receiver hitch, it is 12". This also will negatively affect very heavy tongue loads and is something I must watch. The further from the axle the hitch is, the more force is applied (similar to a lever idea). All-in-all, I think this a great product. Well-made, sturdy. Don't expect it to do something that is impossible.

Scritto da: Benjamin K.

Weld it so it wont rotate

I used the anti-rotate plate on the bottom of the hitch until it chewed away the lip on the mounting plate. Now it rotates so I'll have to weld it. The hitch itself is heavy duty and works well.

Scritto da: Stan555

Excellent Itme

Very well built and easy to install.

Scritto da: Amazon Customer

Very useful

Highly recommend this for various jobs associated with a four wheeler. Moving trailers, dragging things, towing items, etc. You could just put a ball on your four wheeler, but a receiver hitch gives options for different sizes and hooks, etc. with ease of use.

Scritto da: Ben Buxton

Works as expected and provides more versatility with our ATV

This product works as expected and allows me to attach a 2” receiver to our ATV. This gives us more versatility on the ranch for attaching a ball hitch to pull that type of implement. Only small issue is that the hitch mount will slightly rotate after use due to the fact there is only 1 mounting bolt. I’ve torqued it down well, but still have this issue…one for the mechanical engineers to figure out :)

Scritto da: MN Jake

Hitch for John Deere 1025R

I bought this for my John Deere 1025R sub compact tractor. The tractor has a bolt on plate with existing holes to bolt on a ball or other devices. I thought this would be perfect. Curt products seem pretty well known. I felt confident the parts would be robust. The unit seems well made like I expected. I was nervous about the reviews about the hitch rotating. I certainly didn't want that. Took a chance. Because the plate on the tractor had a larger flat spot compared to ATVs so I thought I'd rotate the v-shaped plate to use the flat end instead. Well that didn't seem to help much. I tightened all the hardware really tight but that didn't help. I think this think is going to twist. I also had to shorten the shank because it hit the bolt head and I couldn't install the pin thru the receiver. A quick cut job with a sawzall and that was fixed. I'll see how it goes but I'm thinking more work will be required. 3 stars for well built and ease of assembly but drop of 2 stars because it probably will rotate.

Scritto da: Leo B.

Awesome product.

Fit perfectly on my Honda Rubicon, attaching where the ball would be installed. Combined with the Curt 2" hitch extension it provides options to tow different equipment like toboggans and tub carts along with connect points for attaching tow straps, etc. Also extends the towing connect point back from the tires, eliminating equipment from rubbing against the tires when turning sharply or backing. Curt makes excellent, solid products.

Scritto da: Customer

Fitted my ATV good but...

Fit and looked good although despite being tightened with a 3' breaker bar and the anti-swivel plate in place there was some swivel. I believe if a fine thread bolt was supplied it may be possible to torque it even tighter. One could weld it the the ATV if you don't want to remove it....

Scritto da: Beartrack

Works great

Just what I needed

Scritto da: Tom Watson

Fits perfect

Nice addition to my ATV. Makes hauling a small trailer easier

Scritto da: BOB

easy install

used for moving cargo trailer