Orbit 34784 PVC-Lock Flex-parandusliitmik, 3/4, 3/4-tolline

Name: Orbit 34784 PVC-Lock Flex-parandusliitmik, 3/4, 3/4-tolline
Brand: Orbit
SKU: 0046878347847
Price: 38.42 EUR
Availability: InStock

Brand:Orbit

3.5/5

€
38.42

Tootjalt Orbit on Põhja-Ameerika juhtiv elamute kastmise ettevõte. Olles esindatud enam kui 180 riigis ja 6 kontinendil, pakume kõige täielikumat ökosüsteemi lahendusi voolikusegisti, vooliku, voolikuotsa, maa-aluse, tilguti, udu ja õuekaitse jaoks. Oleme üle poole sajandi juhtinud tööstust uuenduslike lahenduste vallas, kogunud üle 100 aktiivse patendi ja palju valdkonna tunnustusauhindu. Alates PVC-Lockist, Blu-Lockist ja Drip-Lockist, mis on erakordselt kiire viis sprinkleritorude ja tilgutitorude ühendamiseks, kuni meie tehnoloogiliselt täiustatud ja enimmüüdud B-hyve nutikate kontrolleriteni, oleme tööstust moderniseerinud ja seadnud elamute niisutamise parimate tavade standard ja muutis väljas kastmise tõhusaks kodumajapidamiste jaoks kogu maailmas. Hydro-Rain on Orbiti tipptasemel kaubanduslik ja põllumajanduslik vaste, mis sisaldab BUILT FOR SPEED pakkumisi, mis on loodud spetsiaalselt professionaalsete töövõtjate ja kasvatajate jaoks. Orbit ja Hydro-Rain moodustavad koos Husqvarna kontserni Gardena divisjoni äriüksuse, mis hõlmab ühiselt maailma suurimat elamute kastmise tootjat. Kuna kogukondadele turvalisele mageveele juurdepääsu tagamine on ülemaailmne prioriteet, kinnitame uhkusega oma pühendumust nutikate lahenduste kõikehõlmava ökosüsteemi pakkumisele, mis hõlmab rakendusi SEGISTILT TALUNI, kuna taotleme pidevalt visiooni MUUTA MAAILMA VEED. .

Ühikuid pole saadaval

EAN: 0046878347847

Kategooriad Tööriistad ja kodukaubad, Korraline veevarustus, Torud, toruliitmikud ja tarvikud, Toruliitmikud,

Mittekonstantse rõhu, mitte-magistraalilise, otsese matmise, külma veega väliskastmise kasutamiseks. 18-tolline pikkus. Ei piira ega suru kokku painutamisel. Ideaalne ebakorrapäraste nurkade või takistuste jaoks. Ülim remondilahendus: võimaldab valesti joondatud toru kiiresti ühendada.

Customer Reviews	4.4 4.4 out of 5 stars 283 ratings 4.4 out of 5 stars
Item model number	34784
Item Weight	8 ounces
Manufacturer	Orbit
Product Dimensions	17.75 x 1.75 x 1.75 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega^*

Teie hinnang

Scritto da: Robert J. Gerndt

Can be glued in and used for constant pressure

The design of "O" Rings and Shark Bite is for convenience, but a better design would be simply to have standard PVC glued joints and then take away the stipulation of non-content pressure.....which means of course it is designed for use downstream of solenoid valves on sprinkler systems, which see pressure only when that zone is on. I called and was told I could glue it. It is rated for 100psi. Glueing was not a problem. And of course, no leaks and no worry of leaks on my constant pressure 45 psi line.

Scritto da: Eric Snow

Worked good.

Much better than sticking severe elbows and couplings together.

Scritto da: Kindle Customer

Poor instructions

Written installation instructions inadequate. I viewed a Youtube video on installation and followed it exactly but still had a leak on one end. The instructions say nothing about how to stop a leak after installation. I guessed the problem was incomplete seating on the leaking end. I fitted Channel Lock pliars on the connection at the leaking end and hammered the pliars toward the pipe being connected until that end properly seated. Turned on the water (40 PSI) and no leak. BTW, I had also purchased the Orbit release tools and pipe bevel in case I had to reinstall the flex repair pipe but thankfully l did not have to use it.

Scritto da: pwcwa

Had a had a leaking joint

Had a leaking right angle joint. Able to access line to and from for over 18 inches. Cut out joint and appropriate amount and unit fit right in with no problem and no leak

Scritto da: Steven S.

Works great but needed 1” for 3/4” PVC

Use OD measurement for correct sizing. Purchased 3/4” connector for 3/4” ID pipe. Connector was same OD size as pipe I was trying to connect to. My existing pipe was too large to slip into Orbit connector. Returned and bought 1” connector which went on easy as directed without any leaks.

Scritto da: Gary Shriver

Love It!

I use to use the ones that slid in and out but this was awesome! Kinda wished it was flexible enough to turn a complete circle to do a short run but it didn’t. Easy fix anyway. Glad I found this.

Scritto da: Hazard Area

Worked Great

This 3/4" item bends 90 degrees and easily. Don't know what others are talking about -- maybe 1" is very stiff. I roughly measured, cut off one end, shoved on the unit after wetting pipe with soap water and deburring, measured carefully for the final cut, and did the same, and both ends went on smooth and easy. No leaks although I roughed up the pipe a bit digging up the dirt, but used very fine sandpaper to remove any ridges, and if there is a leak, it is super slow. I also bought the Orbit 35809 PVC Lock Release Tools that had a deburring tool, and three lock release tools for different size pipes, just to have on hand if I screwed up. The deburring tool worked fine with no skipping and roughing up the edge.

Scritto da: Barry

Great repair item

Allowed me to repair a pool leak without having to call the expensive pool company.