Monarch vihmaketid 20042 alumiiniumist must pulbervärvitud vihmaveerennide adapteri vihmakettide paigaldamine, standardne

Name: Monarch vihmaketid 20042 alumiiniumist must pulbervärvitud vihmaveerennide adapteri vihmakettide paigaldamine, standardne
Brand: Monarch Rain Chains
SKU: 0633402200428
Price: 40.52 EUR
Availability: InStock

Brand:Monarch Rain Chains

3.7/5

€
40.52

Monarchi alumiiniummust pulbervärvitud vihmaveerennide adapter vihmaketi paigalduskomplekti jaoks, standardsuurus parandab veevoolu, vähendab pritsimist ja täiendab vihmaketti. Sobib enamikele vihmaveerennidele ja kaasas on täiendav vaskplaat suuremate vihmaveerennide paigaldamiseks. Lihtne paigaldamine, mis ei vaja tööriistu.

Ühikuid pole saadaval

EAN: 0633402200428

Kategooriad Terrass, muru ja aed, Objektikaunistus, Rennikettid,

KAUBA ÜLDMÕÕTMED: vihmaketi vihmaveerennide reduktori mõõtmed on 5” (P) x 3,5” (L) x (3)” K. Ülemine ava 2 tolli, alumine ava 1,75 tolli; Enne vihmaketi vihmaveerennide adapteri komplekti paigaldamist välistingimustes kasutatava vihmaketi külge puhastage kindlasti oma vihmaveerennid. LIHTNE PAIGALDAMINE: vihmaveerennide paigaldaja kinnitatakse lihtsalt otse vihmaveerennide kettide ülaossa. Vihmaketi vihmaveerennide adapteri messingist poldil on kesksoon vihmakettide riputamiseks ja kinnitamiseks vihmaveerennide jaoks. SUURENDAGE VÄLJÄREERIVÕIME: Vihmakettide paigaldaja koos vihmaketi vihmaveetorude vihmaveetorudega pakub ainulaadset äärekivi atraktiivsust, mis täiustab teie kodu välimust. Täiendage välimust, lisades ühe meie ankurdusbasseinidest või ankurdusvaiadest. PREMIUM KVALITEETNE KONSTRUKTSIOON: Vihmaketi vihmaveerennide paigaldaja on valmistatud alumiiniumist ja messingist poldiga, et teie vihmakett riputada. Vihmakettide komplekt pakub turvalist ja sujuvat viisi vihmakettide renni külge riputamiseks. FUNKTSIONAALNE DISAIN: vihmaketi adapter on konstrueeritud nii, et see sobiks vihmaveerenniga äravooluava kohal, kus on äravoolutoru. Vihmaketihoidja püüab vihmavee kinni ja kitseneb allapoole, et juhtida vesi vihmaveerennist vihmaketi allavoolutorudesse.

Country of Origin	India
Customer Reviews	4.6 4.6 out of 5 stars 1,067 ratings 4.6 out of 5 stars
Item model number	20042
Item Weight	4.6 ounces
Manufacturer	Monarch Rain Chains
Product Dimensions	5 x 3.5 x 3 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega^*

Teie hinnang

Scritto da: Juana

Useful

These adapters for use with rain chains were easy to install and use immediately. I had three installed, with the rain chains in about an hour. Waiting for rain so we can watch them in action.

Scritto da: Cary Alburn

A pain to install, but once installed, worked perfectly.

The media could not be loaded. This adapter might work well in a pre-existing downspout hole, but cutting a hole where there wasn’t one was a pain. It would have been helpful if the instructions stated what size hole saw might be appropriate, but it didn’t. I think a 2 1/4” would work, but I only had a 2” and 2 1/2” in my tool box, so I used the larger one—hole saws are expensive. And cutting into a thin aluminum gutter is difficult. The reinforcement plate provided is slightly too wide for a standard 5” K gutter—so I cut off about 1/4” with tin snips so that it would lay flat in the bottom of the gutter. That’s something that the manufacturer should change, to make it easier to install in a 5” gutter—it would still have to be shaved for a 4”, but very few gutter installers install 6” gutters. I then sealed both the adapter and the reinforcement plate with gutter sealant, gluing them in place. My timing was perfect, because the gutter sealant instructions said to wait 24 hours—a driving rain happened 26 hours later. End results: great!

Scritto da: Goldens

Was exactly what we needed

Great fit for our rain chain

Scritto da: Meche

Larger adapter plate very helpful!

This Monarch rain chain install kit was just what I needed for my older gutters. The adapter piece on its own was not big enough to cover the shape and size of my gutter outlet so I put the larger plate through the top hat and glued them together with roof cement then dropped it through the gutter outlet and sealed in place. Kudos to the Monarch manufacturer for furnishing different size plates. I also like that the material is powder coated aluminum because the copper type would cause a corrosive reaction. Photos attached

Scritto da: Amazon Customer

Seems sturdy

I think some water leaks around from the sides but I guess it doesn't make a difference. It seems sturdy enough and u hooked a rain chain that was kinda heavy. Worked well for me.

Scritto da: Robert D.

Necessary to attach chain to gutter.

There were no instructions. Basically you will need a 2" hole saw to punch a hole in the bottom of the gutter. The adapter will just fit through thru. There is no way to attach or seal it to the bottom of the gutter. I used some silicone caulk to seal it and then drilled holes at each end of the adapter and screwed it to the gutter. The installation took 10 minutes - that is after I located a 2" hole saw, caulk and screws.

Scritto da: R S Cobblestone

Works great!

Works great with a Monarch Rain Chain link in my downspout!

Scritto da: JMLMT

Perfect and easy to install

This was so easy to install; drop it into place, and you're done after attaching the rain chain. It took me more time to remove the old spout (merely for aesthetics) and attach chain. A DIY project for sure

Scritto da: Francisco Garcia

Muy resistente

Todavia no lo instalo, pero es muy resistente

Scritto da: Leslie K.

Bad fit

They didn’t fit in my eves troughs. Totally useless and too late to return

Scritto da: Shannell

Superfluous to need

As above

Scritto da: Tinus

Good

Good system for rain chains