Milton 761 1/4 FNPT HIGHFLOWPRO V-stiilis/Euroopa vahetatav messingist õhupistiku liitmik (suure mahuga madalrõhurakendus) - 10 tk.

Name: Milton 761 1/4 FNPT HIGHFLOWPRO V-stiilis/Euroopa vahetatav messingist õhupistiku liitmik (suure mahuga madalrõhurakendus) - 10 tk.
Brand: Milton
SKU: 0030937308283
Price: 40.40 EUR
Availability: InStock

Brand:Milton

3.6/5

€
40.40

Viimased 70 aastat on Milton olnud pneumaatiliste tarvikute valiktoode. Oleme leiutanud arvukalt tööstusharu standardtooteid, sealhulgas klassikaline M-Style “I/M” KWIK® vahetusliitmik ja pistik, aknatäite näidik, ohutuspuhumispüstolid ning ikoonilised Driveway Signali helisignaalid ja kellahelid. Nende leiutistega on meie portfell kasvanud üle 1400 erineva SKU-ni. Need tooted hõlmavad laia valikut rakendusi erinevates tööstusharudes, nagu autotööstus, autopargi hooldus, ehitus ja tootmine. Tänaseni on Milton jätkuvalt kõrgekvaliteediliste pneumaatiliste tarvikute ja liitmike turuliider, järgides uhkusega meie parimate toodete ja töökindluse pärandit.

Ühikuid pole saadaval

EAN: 0030937308283

Kategooriad Tööstus ja teadus, Hydraulics, Pneumatics & Plunting, Armatuurid, Toruliitmikud, Push-to- Connect liitmikud,

Ärge ületage 300 PSI. Kasutamiseks ainult suruõhuga. ÜHILDAB: Aktsepteerib ka nii M-Style kui A-Style pistikuid. Maksimaalse vooluhulga säilitamiseks on soovitatav kasutada V-stiili. IDEAALNE: suure mahu ja madala rõhuga pneumaatiliste rakenduste jaoks. SUUR VOOLU: 1/4 naissoost NPT. 1/4 Põhivoolu suurus. Maksimaalne sisselaskerõhk 300 PSI. 74 SCFM. 250 kraadi F Max Temp. HIGHFLOWPRO V-stiilis liitmikud ja pistikud tagavad kuni 75% rohkem õhuvoolu.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Milton
Brand	‎Milton
Color	Brass
Color	‎Brass
Connector Type	Plug
Connector Type	‎Plug
Country of Origin	‎USA
Customer Reviews	4.6 4.6 out of 5 stars 315 ratings 4.6 out of 5 stars
Exterior Finish	Brass
Exterior Finish	‎Brass
Included Components	‎1 Milton Branded Product
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	1.31 x 0.38 x 0.38 inches
Item Dimensions LxWxH	‎1.31 x 0.38 x 0.38 inches
Item model number	‎761
Item Package Quantity	‎1
Item Weight	0.05 Pounds
Item Weight	‎0.05 Pounds
Item Weight	‎0.72 ounces
Manufacturer	‎Milton Industries
Material	Brass
Material	‎Brass
Measurement System	‎Metric
Number Of Pieces	10
Number Of Pieces	‎10
Part Number	‎761
Product Dimensions	‎1.31 x 0.38 x 0.38 inches
Size	Box of 10
Size	‎Box of 10
Special Features	‎1/4" female national pipe thread -Maximum of 300 pounds per square inch -Air flow of 74 standard cubic feet per minute -Maximum temperature of 250 degrees Fahrenheit - - -
Thread Type	NPT
Thread Type	‎NPT

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega^*

Teie hinnang

Scritto da: B

Good deal for a 10 pack...but

The pictures show a female thread. The box i got was male threaded. Not gonna bother returning them because I can use em down the road, just letting others know.

Scritto da: Som Gop

NOT Made in China!

Excellent fit and seal - NO LEAKS! Made in Taiwan = quality equivalent or better than Made in USA!

Scritto da: C.KOELLE

Too soft for hard use!

Buy steel fittings if you use these everyday! I work in a body shop, and use my DA sander EVERY day. I wanted to use a standardized fitting size for everything, (pinstripe remover, DA sanders, paint guns, primer guns,..etc.) I bought these to replace the old non-HVLP fittings the shop had on their air hoses. These are quality made, but wear MUCH too fast when used on pneumatic tools such as sanders. I replaced the fittings on my tools and paint guns at the same time. The one on the DA sander already had to be replaced once, while the one on my primer gun is still working fine. I think the sander being the most used tool, and having the most stress on the hose wears these brass fittings FAR too fast. I was having issues a few days after putting one of these on my sander. The brass was starting to "mushroom" out from use and was difficult to even remove from the air coupler. Bottom line in my opinion: Buy steel fittings for hard/commonly used tools.

Scritto da: Dustin

Hi Flow Fittings are great....BUT

... you need to make sure your compressor can keep up. Everybody raves about how great these fittings are, but they don't all tell the whole story. The increase torque and flow you get with using these fittings are great, and I did notice a big difference. One must keep in mind though, that you will now be drawing more air from your air source. This means that your compressor better be able to keep up or you'll be pausing and waiting longer for it to fill up! My advice is to just change the fittings on the tools that you NEED the higher flow with. Since the quick-connect is backwards compatible with the standard Industrial fittings, you can leave the other tools alone.

Scritto da: Generic User

Awesome! Necessary for all of your high-demand air tools!

At first I thought that these would be all hype, but whenever I got them I changed my mind. The inside diameter of these is absolutely huge compared to anything else that I have used. I use these in conjunction with a small length of leader hose so that the coupler will not wear as fast as directly putting onto the air tool. Man, you want to talk about performance out of these! The first one I put on was on my 1/2" impact wrench which has a 2" extended anvil. It was almost like the wrench had trouble keeping up with the air supplied to it! These are great, well worth the monies.

Scritto da: David L.

No leaks!

Fit perfectly and does not leak like the junk that came with the air tank. Another reviewer recommend this company and I'm glad I followed. Good price

Scritto da: JCM

Wrong one

Received female version not male Had to re order Price is fantastic thought Will be keeping for future use Otherwise Milton v flow is the best fitting

Scritto da: Caribou60

Nicely made

They're air fittings, they're made of brass and for a pair, I thought the price was fair. I needed a new air hose so I took the opportunity to replace all my existing fittings and couplers with the V style, brass ones from Milton. Can't say as I can tell a big difference between these and my old fittings from a performance perspective. I will say this, everything works as well as it ever did. Guessing these will last pretty much forever.

Scritto da: Cliente Amazon

Perfetto

Ottimo prodotto nuovo e originale Milton. Arriva in una confezione contenente due innesti. Profilo tedesco dal grande diametro interno. Acquistato per accoppiare ad un tubo per avviatore pneumatico per garantire la portata minima necessaria. Filettatura 1/4 npt femmina, integralmente in ottone. Prezzo e spedizione ottime. Venditore americano serio.

Scritto da: Paul Pharand

Good quality

Quite satisfied

Scritto da: Joshua

Good

As described