MIBRO 300691 bimetallist ukseluku ja lukustuskruvi paigalduskomplekt puit- ja metalluste jaoks

Name: MIBRO 300691 bimetallist ukseluku ja lukustuskruvi paigalduskomplekt puit- ja metalluste jaoks
Brand: Mibro
SKU: 0066366300697
Price: 59.99 EUR
Availability: InStock

Brand:Mibro

2.3/5

€
59.99

TOOTJALT See metallist ukseluku paigalduskomplekt firmalt Mibro – üle 60 aasta vana ettevõte, mis valiti Kanada 50 parima hallatava ettevõtte hulka, sisaldab Mibro patendiootel EZ-Guide malli, mis sobib 1-3/8-tolliste või 1-tolliste ustega. 3/4-tolline paks, tagaküljega kas 2-3/8-tolline või 2-3/4-tolline; õiges mõõdus bimetallist augusaed ja vajalikud võllid koos juhtpuuridega. Paigaldage hõlpsalt kas ukselukud või surnud poldid. Puidust ustel kasutamiseks proovige Mibro mudelit 300681 süsinikterasest augusaagidega.

Summa

Lisa ostukorvi Osta kohe

EAN: 0066366300697

Kategooriad Tööriistad ja kodukaubad, Tarvikud, Ovede riistvara ja lukud, ,

Lihtne, lihtne kasutada. Professionaalse kvaliteediga augusaed täpse ja pika kasutusea tagamiseks. EZ kasutage kiireks seadistamiseks malli.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Mibro
Country of Origin	‎China
Customer Reviews	3.2 3.2 out of 5 stars 54 ratings 3.2 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item model number	‎300691
Item Package Quantity	‎1
Item Weight	‎1.15 pounds
Manufacturer	‎The Mibro Group
Material	Wood,Metal
Material	‎Wood,Metal
Number Of Pieces	1
Number Of Pieces	‎1
Package Dimensions	‎8.1 x 7.4 x 2.8 inches
Part Number	‎300691
Warranty Description	‎Guaranteed for the life of the product against defects in materials of workmanship

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega^*

Teie hinnang

Scritto da: FireMedic

Good for one door, maybe two. Not sturdy enough for multiple uses.

I installed the first deadbolt with this kit and the plastic cracked at one of the screws that hold the unit in place (on the edge of the door.) I was able to "baby it" carefully then used epoxy on the crack to install a deadbolt in a second door. The crack reappeared, but I was able to complete the job. Not sure if this will hold up if I used it again. Should be a metal bracket or a harder plastic. Otherwise, it does its job.

Scritto da: Skinless

Drill bit may cause the problem

Installed lock at the metal door Pros: Bi-metal saw is sharp and cuts well. Template is holding at place and keeps right dimensions. Cons: Pilot drill bit should be longer. It does not go through the metal when saw is contacting the metal surface. This is causing drill jam. To override it use another drill bit to drill the pilot hole separately after you marked its location with kit stuff. Difficult to separate adapter with drill bit from bimetallic saw after drilling. It is self-tightening. Do not use 1/2 in wrench to separate adapter with drill bit holder off saw. Use 10 mm socket with ratchet to unscrew drill bit holder from adapter. Leave adapter at saw. BTW first adjust saw centering at drill. Rating 4 stars for the final results.

Scritto da: Denise

Worked great on my metal and wood door.

Worked great to add a deadbolt to my door. The piece that screws into the round cutter thing that you insert into your drill (clearly I am not a pro but had no issues using it) does get stuck. I would recommend greasing it up. Also, don't push when making the hole, let the drill do the work. It is a slow process if it's a solid wood door, but it will go through. *In the picture you may noticed a little opening above the lock. That was my fault, not the products fault. I drilled at an angle.

Scritto da: Roost

Don't forget tuff to mortise

Works fine but I think the guides could be a little more precise. Also there is nothing in the kit to help with mortising the door for the bolt guide plate

Scritto da: RJ

Unable to cut through metal door

I was unable to cut a hole through my metal front door using this kit, even after attempting with two different high powered drills. The blade just doesn't seem strong enough, as it started to wear down in the process. Also, as another reviewer pointed out, there is absolutely no mention of the mortising that needs to be done on the door and frame for the faceplates that need to be installed for both doorknobs and deadbolts.

Scritto da: Jake Fritz

Good for DIY

A little cheaper built but worked good for what I needed it for. If I was going to do a bunch of doors would spend a little more for a higher quality jig

Scritto da: george ferris

Easy to use - fast delivery

I needed to do one door and this was a great price, fast delivery, and worked perfectly. Some have noted the saw is difficult to get off the arbor, but I happened to already have the smaller hole saw already in my toolbox and used them on two separate arbors. I'd buy this again, no problem.

Scritto da: Mychael

Had to buy another piece to finish...

Worked great at first, but when it came time to switch over to the smaller one, we couldn't, as the drill bit wouldn't separate from the larger hole saw. We ended up having to go buy a 1-inch hole saw by itself to finish our door.

Scritto da: Mathieu Gionet

Set up is easy, but it breaks

Setting up was fine and it drilled ok for a while, but the guiding drill-bit broke off the round drilling piece after a while. Had to go buy a new one to finish

Scritto da: Howard Watson

This was just perfect for my job

Awesome