Jah4Kõik vertikaalsed seinale kinnitatavad olümpiakangihoidik, kangihoidik, rippkangihoidja kodutreeningseadmete jaoks C. seinale kinnitatav kangihoidja – 1 baar

Name: Jah4Kõik vertikaalsed seinale kinnitatavad olümpiakangihoidik, kangihoidik, rippkangihoidja kodutreeningseadmete jaoks C. seinale kinnitatav kangihoidja – 1 baar
Brand: Yes4All
SKU: 0810073384859
Price: 49.54 EUR
Availability: InStock

Brand:Yes4All

3.9/5

€
49.54

Kui soovite vabastada oma piiratud treeningruumi organiseeritud välimuse saamiseks, siis investeerige kvaliteetsesse Yes4All seinale kinnitatavasse kangihoidjatopsi ja vaadake, kuidas see teie koduses jõusaalis töötab.RUUMISÄÄSTEV LAHENDUS TEIE FENNESSI KODUJÕUSLUSELESaadaval neljakordsena baari hoidmise tarvik, kompaktne Yes4All seinale kinnitatav kangihoidja Top on valmistatud 4,5 mm paksusest terasest aluspinnast ja musta värviga kaetud viimistlusega, et seista aastaid ilma korrosiooni või lagunemiseta. Polsterdatud UHMW plastikust vooder hoiab latid stabiilsena ja kindlalt ning aitab vältida karmi kokkupuudet kangiga, kui asetate selle riidepuule. 1,16-tolline (30 mm) kaugus rippkangi riiuli pulkade vahel on piisavalt lai, et see sobiks traditsiooniliste kangivõllidega läbimõõduga 25–28 mm. KIIRSEADISTAMINE LIHTSAKS KASUTAMISEKS. jõutreeningu ala. Universaalse disainiga funktsioon, mille kruviaukude vahe on 2, 12 ja 2 tolli, Yes4All varraste riidepuu ühildub 12-, 14- ja 16-tolliste puidust naastudega. Vertikaalse kangihoidja saate kinnitada ka betoonseinale, kasutades kruvisid ja seinaankruid.Märkus: Seinaankrud ei kuulu sellesse komplekti. TOOTE SPETSIFIKATSIOONID * Pakett sisaldab 1 tugevast terasest varda riidepuu ja 4 kruvi puidust kinnitamiseks * Materjal: teras * Kaal: 200 naela * Toote kaal: 6,61 naela * Värv: Must * Aukude vahekaugus: 2–12–2 tolli * Ühildub 12-, 14- ja 16-tolliste puidust naastudega * Terasplaadi paksus: 4,5 mm * UHMW polsterdatud plastist kiht kangi kaitseks * Suurepärane kasutamiseks koos tõstekangide, jõuvarraste, lokkide, kumerdatud tõstetangide ja muude spetsiaalsete olümpiakangidega GARANTII1-aastane garantii ja 60-päevane tagastus

Summa

Lisa ostukorvi Osta kohe

EAN: 0810073384859

Kategooriad Sport ja vabaõhu, Treening ja fitness, Tugevustreeninguvarustus, Raskused Racks, Vaba kaalu hoidjad,

SÄÄSTAB RUUMI, SÄÄSTAB AEGA: kangihoidik mitte ainult ei kinnita teie kangi, vaid muudab ala ka korralikumaks kohaks treenimiseks. See aitab säästa pingutusi tegeliku treeningu jaoks, selle asemel et raisata aega koristamise peale. KIIRE JA LIHTNE PAIGALDAMINE: vertikaalse kangihoidja paigaldamiseks on pakendis juhend, toimingud on lihtsad ja vajalik riistvara, nii et saate kangi jaoks kena koha. PE LISATUD KONTAKTPUNKTI: tootel on PE-padi, mis vähendab piisavalt müra ja pakub teie kangile paremat kaitset, tagades, et need ei kriimu iga kord, kui need nagile asetate. EFEKTIIVNE SUURUS: 1 baarihoidiku mõõdud on 3,1 x 3,9 x 3,9 tolli, 2 baarihoidjat on 6,3 x 3,9 x 4,8 – PxLxK; Kompaktset disaini saab seadistada kõikjal majas või koolitusruumis; Sobib erinevatele pindadele, sh sein, kivi, tsement. KÕRGE KVALITEET: meie jõusaali korraldajariiulil on kõrge kvaliteet, mis tagab maksimaalse vastupidavuse, mis on teie väärtuslike kangide jaoks kohustuslik. valmistatud suurepärasest roostevabast terasest, mis vastab USA standarditele, rahuldab teie nõuded korrastatud koduse jõusaali järele.

Brand	Yes4All
Brand Name	‎Yes4All
Color	‎Black
Customer Reviews	4.8 4.8 out of 5 stars 483 ratings 4.8 out of 5 stars
Item Package Dimensions L x W x H	‎5 x 4.76 x 4.13 inches
Manufacturer	‎YES4ALL
Material	Aluminum
Material	‎Aluminum
Number of Racks	1
Package Weight	‎0.56 Kilograms
Part Number	‎CNH9
Style	C.Wall Mount Barbell Holder - 1 Bar
Style	‎C.Wall Mount Barbell Holder - 1 Bar

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega^*

Teie hinnang

Scritto da: CL

Not well designed for 12" on center studs

My wall has studs that are 12" on center distance. That means for the unit you use the 4 inner holes which are in the "Hum" plastic pad. Since they did not provide a large enough hole in the plastic for the lag bolt plus washer to clear the surface of the plastic, the head of the bolt sticks out beyond the plastic. This means that bars in the 2 outer slots collars will hit the lag bolt heads. Not a great idea as this will scratch up the collars. I may try to tear this appart and drill the plastic out but for now I am not using the 2 outer slots and have some duct tape over the bolt heads.

Scritto da: Ty

Nice, as advertised

Great, exactly what I was expecting. Heavy duty, and weighs a lot. Nice holes for different stud lengths. Only small gripe is that it’s black and the silver bolts stick out like a sore thumb, so I plan to sharpie them.

Scritto da: Gary Bennett

Great little bar holder

Needed a short bar holder for the space I was going to install it. This works perfect. Has plastic to protect the bar where it hangs in the bracket.

Scritto da: Family No. 5

Well Worth It

This thing is a tank. There isn't much else to say other than it's going to hold up your bars which looks much better than them laying on the ground. The tricep bar doesn't fit in there super great but not bad if you turn it slightly.

Scritto da: Emily

Solid, Simple Mount

Love this mount. Needed a single mount for my Rogue Ohio bar. This one fit the bill perfectly. Solid construction and keeps the bar off the wall at the bottom. Very happy with my purchase.

Scritto da: Adam

Amazing bar hanger for the price

I need 4 bar wall hanger, and have other Yes4All products that have been great so I went for it. It was well packaged, it's very heavy duty, and looks great compared to more expensive companies. Install took maybe 10m. Others that have complained about the bolts weren't doing it right. It's super easy, and very sturdy straight into the stud. Currently have a curl bar, Rogue Ohio Bar, Rogue OPB hanging from it. Would easily work with a SSB also.

Scritto da: Christopher

Sturdy, easy barbell storage

I used to have a name brands vertical bar storage but that involved lifting and setting the barbell into a tube on the ground. I wanted something that went on the wall and the bars slid into easily. Hence when I found this I was excited. I have three barbells as of now (two mens olympic bars and a womens olympic bar) and this holds great. I have it hung on a stringer between two studs and it is rock solid. Easy to remove and put back in barbells which is great after a hard lifting session. Will purchased another with the next barbell I get.

Scritto da: Yen

Best barbell rack

Solid product. No instruction but installation is pretty easy. Much cheaper than other big brands but the quality is great. Pretty happy with the purchase.

Scritto da: Amazon Customer

Best bang for the buck

Compared to other wall-mounted barbell holders, this is probably the best bang for the buck. If you’re feeling uneasy about the supplied hardware, it’s fairly simple to grab some lag bolts from a hardware store (I installed it with the supplied bolts with no issue). However, the holder itself is solidly built, with a very thick layer of UHMW plastic on the bottom, something that other more expensive holders lack

Scritto da: Jill

Goood

Great

Scritto da: Jeremie Vincent

Sturdy

I love it, it is sturdy and it fits my needs perfectly!

Scritto da: Chris

Fantastic quality storage solution. Cheapish bolts

Great unit! I saw one comment about the lag bolts being pretty iffy and have to agree. The lag bolts are no where near what you would get at a local hardware store. They feel light and cheap. However, I didn’t have any issues using them in my install (no stripping using a Phillips head or socket). This would be a 5 star if the lag bolts were higher quality but overall this is still a great unit and I would recommend it.

Scritto da: James W Dalby

Easy to install

Quick & Easy to install, predrill your holes a bit smaller first will help with getting the screws tight on wood, if you are doing it on concrete, drill a small 2x4 to the wall with some tapcons, then drill the provided screws in after pre-drilling, nice and tight easy pezy.