0
0

Kokku:€ 0.00

Vaata ostukorviKassasse
LoginRegister
0

Kokku:€ 0.00

Vaata ostukorviKassasse
LoginRegister

Hover-1 Beast Buggy kinnitus

Brand:Hover-1

3.2/5

€
226.41

Muutke oma hõljuklaud Hover-1 Beast Buggy Attachmentiga elektriliseks kardiks ja looge futuristlik transpordiseade, mis muudab teie pendelrände lõbusaks, lahedaks ja nauditavaks. Ühildub enamiku isetasakaalustuvate 10-tolliste ratastega elektriliste hõljuklaudadega, see kardikinnitus kinnitub ideaalselt teie elektrilise rolleri külge ja sobib suurepäraselt täiskasvanutele, kuna see tagab täieliku stabiilsuse ja juhitavuse. Sellel on mugav iste, kaks käsitsi juhitavat juhtkangi ja sõltumatu tagaratta juhtseade, mis võimaldab lihtsaid pöördeid ja tagurdamist. Reguleeritavat raami pikkust saab kohandada vastavalt teie pikkusele ja mugavusele, samas kui reguleeritavad rihmad kinnituvad kindlalt hõljuklaua külge, et tagada ohutu sõidukogemus. Kõik Hover-1 elektrilised hõljuklauad on testitud ja sertifitseeritud. Soovitame teil enne naasmist tõrkeotsinguks võtta ühendust Hover-1 toega. Enamasti on lahendus lihtne ja me aitame hea meelega! Soovitame kõigil sõitjatel enda kaitsmiseks kanda sobivat turvavarustust. Külastage Hover-1 kaubamärgipoodi (klõpsake meie kaubamärgil), et leida kiivrid, põlve- ja küünarnukikaitsmed ning valmistuda linna löögiks.

Summa
Lisa ostukorviOsta kohe

EAN: 0888255199454

Kategooriad Sport ja vabaõhu, Sport ja fitness, Suusad, Skateboardid ja rollerid, Skootrid ja seadmed, Iseseisvalt balansseeruvad rollerid,

KIIVRID JA TURVAVARUSTUS (MÜÜA ERALDI) – kasutage sõitmisel alati turvavarustust. Enda kaitsmiseks ja heade aegade veeremiseks soovitame Hover-1 kiivrit, põlve- ja küünarnukikaitsmeid. Enne kokkupanekut ja paigaldamist järgige hoolikalt kasutusjuhendit. LÕBUS TÄISKASVANUTELE – Hoverboardi istmekinnitus ei valmista kindlasti pettumust ja sobib suurepäraselt kingituseks perele ja sõpradele igas piirkonnas. LIHTNE PAIGALDAMINE - Kardi kinnitus sisaldab kõiki vajalikke kinnitusvahendeid nagu kruvid, mutrivõtmed, mutrid, seib ja muud kardi kokkupanekuks vajalikud varuosad. Kasutusjuhend sisaldab teie abiks samm-sammult paigaldusjuhendit. TÄIELIKULT REGULEERITAV JA TURVAV – kummist kaitsmetega reguleeritavad rihmad kinnitavad vankri kindlalt teie elektrilise hõljukitõukeratta külge ja tagavad täieliku ohutuse, samas kui reguleeritav raami pikkus võimaldab kohandatud ja mugavat sõitu. TÄIELIK JUHTIMINE JA STABIILSUS – istmekinnituse mõlemal küljel on käsitsi juhitavad mängupulgad, mis võimaldavad täielikku kontrolli ja lihtsat manööverdamist, samas kui sõltumatu tagarattavedu võimaldab kiireid pöördeid ja edasi-/tagasisõitu. MUUNDAGE HÕLJUT GO-KARTIKS – muutke oma elektriline hõljukitõukeratas maanteekäruks koos Hover-1 Beast Buggy Attachmentiga, et pakkuda uuel tasemel lõbu. Ühildub enamuse 10 Hover-1 (soovitatav) ja mitte-Hover-1 hõljuklauaga (hõljuklaud müüakse eraldi).
Age Range (Description) Kid
Brand Hover-1
Brand Name ‎Hover-1
Color Black
Color ‎Black
Customer Reviews 4.2 4.2 out of 5 stars 909 ratings 4.2 out of 5 stars
Grip Type ‎Contoured
Included Components ‎Go-Kart
Item Dimensions LxWxH ‎26 x 9.84 x 21.85 inches
Item Package Dimensions L x W x H ‎21 x 20 x 11.5 inches
Item Weight 10.11 Pounds
Item Weight ‎10.11 Pounds
Manufacturer ‎DGL Group
Material ‎Aluminum
Model Name Beast Buggy
Model Name ‎Beast Buggy
Number of Items ‎1
Package Weight ‎8.82 Kilograms
Part Number ‎HY-BEAST-BGY
Size ‎One Size
Style ‎Beast
Suggested Users ‎Self Balancing Scooters
Warranty Description ‎90 days

3.2

11 Review
5 Star
66
4 Star
11
3 Star
8
2 Star
4
1 Star
11

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega*

Scritto da: Kindle Customer
Arrived in a soaked box with rust and mold
This project going to take a bit to get started. Interior box was more than just damp. It was soaked. Mold in box, all over parts. Rust on painted and non-painted parts. I'll start drying it out, treat the rust and maybe start assembly. This was delivered to a part of the country with snow. The wet box occurred somewhere else. Hopefully, this well turn out to be ok. Not like my kids won't get it dirty. Follow-up: cleaned and removed the rust. Applied oil to all areas the might rust. The wheel needed grease, air and adjustment to work 8 properly. After drying out all the parts and assembly, took an hour or so. This is not a easy build and takes time. Definitely a DIY project. They did include tools to assemble the unit. Operation: installation was straight forward. It worked fine. The oldest kid was racing everywhere. The youngest kid had to play with controls for awhile. I moved this up a star. It works great, once I overcame the initial issues.
Scritto da: Robert Valade
great memories made
amazing product! fun to get energy out of kids great memories made with this item!
Scritto da: David Gibbs
Great addition for hoverboard
We got this for my 8 year old son who doesn't have great balance and wasn't getting much use out of his hoverboard. He can now safely ride and enjoy himself! Great buy!
Scritto da: Anon
Comes with the exact amount of parts needed.
This is a minor concern of mine. The instructions for the seat assembly was kind of confusing for me. Instruction number 4 tells you to use 4 of the smaller nuts and screws, but if you look more closely at the picture, it clearly shows you to put the washers before the nuts get put on (it's not mentioned anywhere on #4 for use of washers) and the instruction manual tells you there are only 4x washers to begin with. On instruction number 5, it actually says to use both the screws and nuts along side the washers on the tire assembly. So really, there should actually be 8x washers in total or 4x smaller washers for the seat. All in all, the assembly part of this kit was well done, now I just need to wait for my hoverboard to be delivered. I'll give an update on how it works from here on.
Scritto da: Chris Watson ????✨
Decent size for older/ bigger kids
I wasn’t very happy with this purchase, Velcro that attaches go cart to hover board wears down and breaks pretty easily. Seat isn’t very comfortable especially for “bigger size “ kids. Handle bars were oddly placed and doesn’t quite sync with steering of the hover board.
Scritto da: Meli Bailey
Bracket and Wheel Issue
The attachment is sturdy and beautiful. . . Until you get to the front wheel assembly. I bought 3 of these to replace previously purchased lesser karts. This is much better. It has amazing suspension, the seat is comfy. There are actual foot rests. There's even this big, sturdy, heavy as all get out wheel. . . Except, that's previous reviewers have stated, the wheel shakes and shimmies like all get out because the bracket is too wide for the axle. Hover-1's solution was to try to squeeze the bracket enough to where it would fit the wheel. This would have worked, if it had been done evenly. Instead, one side of the bracket is askew. I am super lucky, my husband is really handy. He added washers equally to both sides to stabilize the wheel and bracket. Now, we've only built 2 out of 3 of the buggies. Only one had the wheel and bracket issue. The other works great and is being fully enjoyed. Which is why I give this 4 stars.
Scritto da: Stefanie Urgo
Has been welded crooked; doesn’t function properly
I ordered 2 of these Hover-1 Beast Buggies as gifts for my kids. They came very nicely packaged, but upon opening one of them I noticed that there were some rust marks on the tops of some of the attached screws and a piece of the enamel paint was chipped off of one of the pieces. I immediately took photos and contacted the company because all over the box and manual it said to contact them for any damaged or missing parts. I filed a claim on their website as instructed. It has now been a month and I have yet to hear from them. They also inform you not to file another claim from that order number or their computer system will automatically cancel out both. Anyways, on the first day after opening the boxes I started to assemble them. Then I realized I had a bigger problem then just some chipped paint. Some of the pieces have been welded off square and after assembly of the buggy the parts that attach to the hoverboard are not lined up straight. I included photos of this. Then, I thought maybe I could loosen the screws to move the L shaped brackets more in line with the hoverboard edges, but guess what? They were painted AFTER being put on and won’t budge. After I assembled both buggies I decided to try to put them on the hoverboards. So I was able to strap them on...they do press onto the pads and make the whole unit move...but because everything is off square one handle is always higher and one lower when even trying to go straight. Turning one direction is very easy and turning the other direction really takes a lot of muscle.... Overall, I am disappointed especially because this one is not a cheap model to buy. I think that the idea of it is great, but with one little mistake during manufacturing and this buggy became difficult to use. I will point out that I tried it out with our SWFT Hoverboard with 10” wheels and even at top speed I did not see any of the front wheel wiggle that some users had mentioned. I am wondering if they were using a hoverboard with wheels smaller than the recommended 10”. So, overall I would not recommend this until they can up their quality control during manufacturing. If they do, this would be a fun buggy.
Scritto da: john d curry
so perfect for me.
easy to assemble and works as it should.
Scritto da: Mr Adam Iles
Great fun...
Great addition to the Hover 1 hoverboard... kids big and small have had great fun with it.
Scritto da: nancy remblay
Not worth it
The front wheel lasted maybe a week!
Scritto da: Melissa L.
only remotely related to the product that you will recieve.
The buggy i recieved is fine and it works but it is not the product i intended to buy. shame on this dealer! sent me a buggy with no spring suspension and subpar connectors, just a regular buggy and not the one i thought i was paying for.

Seotud tooted

hot
Gotrax HoverflyKart hõljuklaua kardiistme kinnitustarvik 6,5 8 8,5 10 iseseisev tõukeratas, reguleeritav raami pikkus ja juhtraua juhtvankri kinnitus, hõljuklaud Go Karti tarvik must
3.2/5

€ 176.91

Gotrax HoverflyKart hõljuklaua kardiistme kinnitustarvik 6,5 8 8,5 10 iseseisev tõukeratas, reguleeritav raami pikkus ja juhtraua juhtvankri kinnitus, hõljuklaud Go Karti tarvik must
3.2/5

€ 176.91

hot
Hover-1 Beast Buggy kinnitus
3.2/5

€ 226.41

Hover-1 Beast Buggy kinnitus
3.2/5

€ 226.41

Avastage meie rahvusvaheline võrgustik

Saadame 28 riiki, üle 200 000 toote. Olge kursis, tellige uudiskiri.

Array

Kokku:€ 0.00

Vaata ostukorviKassasse

Kategooriad

Kõik kategooriad
Menüü Kategooriad Lähedal Käru

Menu