HHIP 2000-0045 3/8 x 3 tolli 8% koobalti kandiline tööriistaotsik 3/8 x 3 tavaline pikkus, M42 8% koobalt

Name: HHIP 2000-0045 3/8 x 3 tolli 8% koobalti kandiline tööriistaotsik 3/8 x 3 tavaline pikkus, M42 8% koobalt
Brand: HHIP
SKU: 0769053004167
Price: 31.02 EUR
Availability: InStock

Brand:HHIP

3.6/5

€
31.02

Cobalt Suurepärased kiirterase tüübid, mis töötavad paremini kõrge kuumuse tingimustes. Kasutatakse kõvade materjalide raskete lõigete jaoks.

Summa

Lisa ostukorvi Osta kohe

EAN: 0769053004167

Kategooriad Tööstus ja teadus, Tööriistad ja kodukaubad, Elektri- ja käsitööriistad, Käsitööriistad, Multitööriistad ja tarvikud, Multitools,

M42 8% koobalt; Tavaline pikkus. Cobalt Suurepärased kiirterase tüübid, mis töötavad paremini kõrge kuumuse tingimustes. Kasutatakse kõvade materjalide raskete lõigete jaoks. Cobalt Suurepärased kiirterase tüübid, mis töötavad paremini kõrge kuumuse tingimustes. Kasutatakse kõvade materjalide raskete lõigete jaoks. Suurus (tolli) SQ x pikkus 3/8 x 3; Tavaline pikkus; M42 8% koobalt.

Brand	HHIP
Country of Origin	China
Item Dimensions LxWxH	3 x 1 x 6 inches
Item model number	2000-0045
Manufacturer	ABS Import Tools Inc.
Material	Cobalt
Product Dimensions	3 x 1 x 6 inches; 1.76 Ounces
Shank Type	Square
Tool Flute Type	Straight

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega^*

Teie hinnang

Scritto da: Pootie Tang

Extreme wear-resistance, especially when grinding, sharpening and polishing.

I got this to make a wood-turning tool called a bedan. Last year I made one out of M2, and I wanted to try M35 to see if it would hold an edge longer. M35 is basically M2 which has cobalt added to improve the wear-resistance and red-hardness. The downside of wear-resistance, of course, is that it takes a lot longer to grind, but a bedan is a pretty simple tool to make, and the red-hardness means you can do most of the grinding on a bench grinder or other high-speed grinder without affecting the hardness. The thing I wasn't prepared for was that the blank had scratches on all four sides and the sides weren't perfectly flat, and, for mainly esthetic reasons, I give my tools all my tools' flat surfaces a high polish with a series of diamond sharpening stones. This has to be done by hand, and in this case it took forever.

Scritto da: David

Definitely hard

Grinding one end to a parting tool takes quite a bit of time compared to standard steels that I normally grind for other things. This should perform nicely when I get it all finishe.d

Scritto da: William

Perfect ????????

Exactly to my expectations. Happy with the purchase.

Scritto da: mrbadasswrench

Fine tool

Will do what I need to do, perfect.

Scritto da: Amazon Customer

The moment you think you messed up...

I didn't measure nor check to see the size of HSS I needed, so I got a one smaller than I'd expect, But still did its' job.

Scritto da: Jim

A decent piece of HSS

Purchased for metal turning. The metal quality was decent, ground easily, and held a decent edge. Used to to aluminum, and cold rolled steel.

Scritto da: DrPhil

Seems to be as advised.

5/16 tool works great on the Chinese mini lathe.

Scritto da: Chris

Exactly what they are.

Not sure how you can mess up a high speed steel blank, but these are exactly what they are supposed to be.

Scritto da: Prem

Use as "Reed Geek" on woodwind Reeds (Saxophone)

Awesome! Although I haven't used it to turn/cut metals - it does what I wanted it to do, and that is - to repair/rework Saxophone reeds (made of Cane/Bamboo) at a fraction of the cost of a custom tool marketed just for that purpose. What I received was well polished with straight and sharp edges. I was able to use it straight out of its pouch. I ordered one more. Hope I find the same quality finish even on the 2nd one. One thing to note: the plastic pouch it comes with is very poor quality. But then, that's secondary....

Scritto da: Roger Vermette

tres bien

travail bie l,accier

Scritto da: james M.Hill

Excellent product

Excellent product exactly as advertised

Scritto da: bzchen

Too expensive