0
0

Kokku:€ 0.00

Vaata ostukorviKassasse
LoginRegister
0

Kokku:€ 0.00

Vaata ostukorviKassasse
LoginRegister

GEAR WRENCH universaalne rihmaratta hoidik - 3900 15 tolli

Brand:GEARWRENCH

3.6/5

€
66.66

GearWrench tutvustas originaalset patenteeritud viiekraadise põrkvõtmega 1996. aastal ja sellest sai kiiresti professionaalsete autotehnikute populaarne kaubamärk. Uuendus ei piirdunud sellega. GearWrenchi kaubamärk jätkab aasta-aastalt oma sisseehitatud põrktööriistade laiendamist, et aidata auto- ja tööstustehnikutel oma tööd kiiremini ja lihtsamalt teha. Töö jaoks õige tööriista olemasolu on ülioluline ja kitsastes kohtades töötavad tehnikud mõistavad selle lihtsa väite võimsust paremini kui keegi teine. See lai valik on selgroog, mis annab GearWrenchile maine enneolematu kiiruse, tugevuse ja juurdepääsu poolest. Tulemuseks on suurenenud tootlikkus neile, kes hoiavad GearWrenchi tööriistu oma kastis.

Summa
Lisa ostukorviOsta kohe

EAN: 0013222026987

Kategooriad Autotooted, Tööriistad ja seadmed, Mootoritööriistad, Pulley Tools,

GM Trucks W/4,3-L, 5,0-L ja 5,7-L mootorid. Dodge Trucks W/3,9-L, 5,2-L, 5,9-L, 8,0-L ja V10 mootorid. Ventilaatori siduri eemaldamisel kasutatavad rakendused hõlmavad järgmist: Ford Trucks W/2,8-L, 2,9-L, 3,0-L, 4,0-L, 4,9-L ja 5,0-L mootorid. Kui seda kasutatakse koos ventilaatori siduri mutrivõtmetega, on see eriti kasulik termostaatilise ventilaatori komplektide eemaldamisel ja vahetamisel. Ainulaadne ajasäästutööriist on mõeldud enamiku rakenduste kinnituspoltide kinnituspoltide kinnipüüdmiseks ja hoidmiseks.
Batteries Included? ‎No
Batteries Required? ‎No
Customer Reviews 4.6 4.6 out of 5 stars 718 ratings 4.6 out of 5 stars
Is Discontinued By Manufacturer ‎No
Item model number ‎3900
Item Package Quantity ‎1
Item Weight ‎1.5 pounds
Manufacturer ‎GEARWRENCH
Measurement System ‎English/Standard
Number of Handles ‎1
Part Number ‎3900
Product Dimensions ‎15 x 4 x 0.5 inches
Size ‎15 Inch

3.6

13 Review
5 Star
75
4 Star
14
3 Star
6
2 Star
2
1 Star
3

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega*

Scritto da: Amazon Customer
It’s just a tool
It’s just a toolRepeat a bit too much for this as when you see what it is they charged a bit too much but I just figured if it makes one job easier I can get it done and not bust my back on it
Scritto da: Kenneth Guined
Water pump pully tool
Works as it should
Scritto da: tdsails
Awesome
If you are going to be changing a fan clutch, just go ahead and get this tool. Don't waste your time with all those snake oil ideas from youtube. I used it on my 2016 Ram 2500 with the Cummins 6.7. It easily hooked to the bolts on the radiator fan pulley and held while I used a 48mm wrench and a 16 ounce hammer (took about 3 good solid smacks) to break the nut free. The prep time to get to the nut took longer than getting it broke free and the fan clutch/fan off the motor. Product was well worth the money, even though (hopefully) I won't have to use it again for a very long time. It will save you some time, bloody knuckles and your sanity.
Scritto da: john lewis
Works
Pretty fiddly but works, I think the grooves/hooks could be deeper.
Scritto da: Adam
Mixed feelings
This is a must have to remove the fan clutch but it does slip of easy so you need to be careful. The wrench is very sturdy and you don’t half to worry about bending like cheap wrenches.
Scritto da: Big Baad Brad
Valuable for the removal of the fan clutch
It is fairly easy to use. The difference in the one I rented is that that one had a grooved locking mechanism and the problem with that is those grooves where most people used it wore out. The winning I find not so helpful on this one is that one of the hooks desert come all the way up to grab the bolt it goes around it but not completely or not like the other side does. In the end it didn't actually work for me because my fan clutch nut was unmovable we ended up cutting it off. But I do recommend the tool
Scritto da: Ruby
Shipped fast.
Not easy to use.
Scritto da: Louie Knives
It works
Worked like a charm on my 6.0 LS2. I tried the pneumatic kit but all that did was gouge the nut.
Scritto da: D. Rodríguez
Muy solida pero es mejorable.
Es algo pesada y solida, lo que es algo bueno, pero los pines que tiene para detener el pulley son bastante cortos. Deberían ser un poco más largos para que se puedan usar sin problemas, incluso si inclinas un poco la herramienta.
Scritto da: Jonathan Welch
Will work on a variety of pulleys
I recently used this tool to secure the pulley on a Chevy Trailblazer. The tool is simple to use and I can tell it will work on many different vehicle brands. For the money I think it is a good tool to have in your cabinet.
Scritto da: Michael Houle
Worked for me, but I had to modify the tool.
For my Dodge Dakota 2003, I actually had to hacksaw the tips off of this tool. It was just not going to work for me as is. Oh well, I was happy I got it to fit alongside my pipe wrench to get the nut free. I used this tool on the top side holes and then the pipe wrench fit nicely underneath. HTH.
Scritto da: kobebryan
Not Good!
Not Good!
Scritto da: Ken Johnson
Good product
Saves a lot of time and simple to use.

Seotud tooted

hot
GEAR WRENCH universaalne rihmaratta hoidik - 3900 15 tolli
3.6/5

€ 66.66

GEAR WRENCH universaalne rihmaratta hoidik - 3900 15 tolli
3.6/5

€ 66.66

Avastage meie rahvusvaheline võrgustik

Saadame 28 riiki, üle 200 000 toote. Olge kursis, tellige uudiskiri.

Array

Kokku:€ 0.00

Vaata ostukorviKassasse

Kategooriad

Kõik kategooriad
Menüü Kategooriad Lähedal Käru

Menu