Extreme Max 5600.3163 ATV vintsi kinnitus Honda TRX420 Rancher 2x4 (TE/TM) jaoks – 2007-2013

Brand:‎Extreme Max

3.3/5

79.05

Õige vints on oluline, nagu ka kinnitus, mida sellega kasutate. Õige vintsi kinnitus maksimeerib vintsi jõudlust ja ohutust ning integreerib teie vintsi sujuvalt teie ATV-ga. See Extreme Max ATV vintsi kinnitus sobib valitud 2007–2013 Honda Rancher ATV-dele. (Täieliku teabe saamiseks vaadake sobivustabelit teisel pildil.) Kasutamiseks koos Warn RT25 / RT30 / XT25 / XT30 vintsidega. Mõeldud kasutamiseks 4.875 kinnitusega rullikutega. Sellel on 3/16 teraskonstruktsioon ja vastupidav must pulbervärv, mis tagab vastupidavuse. Mõeldud lihtsaks paigaldamiseks, paigaldusjuhend kaasas. Extreme Max pakub ka ühilduvaid ratta- ja rullikuid, samuti täielikku ATV-kaablite, köite, konksude ja muude tarvikute valikut.

3/16 teraskonstruktsioon tugeva musta pulbervärviga. Kasutamiseks kõigi ATV vintsidega alates 2000–3600 naela 4-augulise (3,00 x 4,875) või 2-augulise (3,10 x 4,875) standardse kinnitusmustriga*. Kasutamiseks koos Warn RT25 / RT30 / XT25 / XT30. Lihtne paigaldada, kaasas põhjalikud juhised. ATV vintsi kinnitus valitud 2007–2013 Honda Rancher ATV-dele (täieliku loendi leiate sobivustabelist).
Brand ‎Extreme Max
Country of Origin ‎China
Customer Reviews 4.2 4.2 out of 5 stars 97 ratings 4.2 out of 5 stars
Item model number ‎5600.3163
Item Weight ‎4.01 pounds
Manufacturer ‎Extreme Max
Manufacturer Part Number ‎5600.3163
Product Dimensions ‎11.75 x 8.75 x 1.25 inches

3.3

12 Review
5 Star
62
4 Star
12
3 Star
15
2 Star
8
1 Star
3

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega*

Scritto da: Stay n it
Good install instructions an easy install!
Great mount, comes with everything you need to install!! Fit perfect with my model!
Scritto da: rbabin526
The mount is good BUT
They supplied it with two u-bolts that don't fit the bumper or the plate itself. Need to make a trip to the hardware store to get it installed. Ridiculous oversight on such a simple thing.
Scritto da: Nelson Acevedo
Excellent
Perfect fit for my 2008 Honda Rancher 420 FM 4x4. The only down is that come with out hardware.
Scritto da: Stephen Thrash
Good quality mount, with issues
I bought the Extreme Max winch mount for my 2007 Honda Rancher 420. According to the install sheet, this is the one for my machine. Initial thought was that it is a good quality mount plate with terrible hardware and even worse installation instructions. The hardware had 4 U-bolts, 4 mount bolts and an odd number of flat and lock washers and lock nuts. Fortunately there was enough lock nuts to install on the U-bolts, several washers were left over that didn't fit any of the bolts, must have been packed on a Friday. The Instructions are just horrible. If your not mechanically inclined, have experience doing this type of work you might have some difficulty understanding what to do. The instructions give you a decent process to follow as far as disassembly, but to install the winch, it says "Install winch", that's it, no other guidance. There's one picture that shows you have to trim the bumper plastic along the side to get it to fit around the winch motor.......Uh no. Try you have to trim the bumper plastic in 4 different places, the bumper frame in two different places, AND you have to put a small spacer behind the fairlead to keep it from hitting the plastic on the bumper, or more trimming. With that said, once everything is trimmed and in place, its a sturdy mount that isn't going anywhere. If Extreme Max could put better quality hardware and better instructions it would make a good product a lot better.
Scritto da: hans desselle
Hardware issues
The u bolt hardware sent with this kit did not even fit the pre drilled holes in the mounting plate. I should not have had to go buy new ubolts because the hardware with this kit was wrong
Scritto da: Jmonholland
Mounting hole not right
The plate fit the four wheeler but the mounting holes didn’t fit the winch.
Scritto da: JMc
Worked Great
I needed this mount to install a Badlands 2500 Winch on my 2013 Honda Rancher. It worked great but I did have to drill some holes to install the fair lead that came with my winch. The predrilled holes did not line up. I would still highlly recommend this mounting bracket.
Scritto da: tk
Fits 4x4 rancher
Described as 2x4 mount. This fit my 2011 rancher 4x4 perfectly. All hardware is included. Mounted a super winch terra 3500. Winch had to be turned around so that the cable feeds from the top straight through the fairlead hole. Other winches may be spooled differently. Took 2.5 hours total install as the whole front bumper gets removed for install.
Scritto da: Amazon Customer
great product easy install!
Fits like a glove!
Scritto da: Sean Horsfall
Worked perfectly
Easy to use, and for perfectly. It even came with extra hardware
Scritto da: Mike
Fits great fast shipping
Fits 2009 Honda fourtrax 420 4x4 comes with hardware to install and decent instructions to install
Scritto da: Mark Thompson
U-bolts supplied with plate don't fit around bumper very well...
Plate fits okay but mounting u-bolts don't fit around factory bumper very well. Also doesn't allow the fairlead to sit flush to the bumper.

Seotud tooted

hot
WARN 74756 Vintsi mootor
3.6/5

€ 572.66

WARN 74756 Vintsi mootor
3.6/5

€ 572.66

hot
Ranch Hand WPF085BL1 vintsiplaat
4.1/5

€ 515.34

Ranch Hand WPF085BL1 vintsiplaat
4.1/5

€ 515.34

Avastage meie rahvusvaheline võrgustik

Saadame 28 riiki, üle 200 000 toote. Olge kursis, tellige uudiskiri.

Array