Eaton WD1212 50-amprine 3-pooluseline 4-juhtmeline 125-voldine pindkinnitusega toitepistik, must

Name: Eaton WD1212 50-amprine 3-pooluseline 4-juhtmeline 125-voldine pindkinnitusega toitepistik, must
Brand: Eaton
SKU: 0784497638464
Price: 46.40 EUR
Availability: InStock

Brand:Eaton

3.7/5

€
46.40

Eatoni juhtmestiku WD1212 50-amprise 125-voldise pinnavõimsusega voolupistikul on vastupidav disain ja konstruktsioon, mis sobib ideaalselt iga suure voolutugevusega tööstusliku ja kaubandusliku toiteallika jaoks. Sellel pinnapealsel anumal on raske gabariidiga tsingitud terasest kinnitusrihm ja klaasiga tugevdatud nailonist korpus. Sellel raskeveokite maanduseta rakendusel on 3-pooluselised/4-juhtmelised funktsioonid ja NEMA standard 14-50R koos 125/250-pingega. Sellel pinnapealsel pistikul on patenteeritud paigaldusklemm, mis võimaldab välja jätta juhtme kuni #4 Ameerika juhtmemõõturi (AWG) järgi. Selle tagaküljel on kontsentrilised väljalöödud ja reguleeritav juhtmeklamber, mis võimaldab tagant ja alt juhtmestikku teie mugavuse järgi sobitada. Seda tuleb kasutada alumiinium- või vasktraadiga. Eaton on usaldusväärne nimi elektritoodete valdkonnas. Eaton on pühendunud toodete pakkumisele, mis suurendavad tootlikkust, energiatõhusust, ohutust tööl ja kodus ning toovad usaldusväärset jõudlust. Olenemata sellest, kas kodu-Feetsi stiil on traditsiooniline, kaasaegne, vabaaja, hubane või maalähedane, nõuab see juhtmestiku seadmetelt rohkem kui varasematel aastatel. Eaton on pühendunud ajakohaste juhtmestikulahenduste pakkumisele, mida Feetsi kodud tänapäeval vajavad.

Summa

Lisa ostukorvi Osta kohe

EAN: 0784497638464

Kategooriad Tarvikud, Suurseadmete tarvikud, Pliidi osad ja tarvikud, Retseptorid,

Kasutamiseks alumiinium- või vaskjuhtmetega. Sisaldab 3-pooluselist/4-pooluselist juhtmestikku Nema standardiga 14-50R pingega 125/250. Kogu väljalaskeava: 1. Tagaküljel on kontsentrilised väljalöödud ja reguleeritav juhtmeklamber, mis võimaldab juhtmestikku ühendada tagant ja alt. Patenteeritud paigaldusklemmid aktsepteerivad kuni #4 AWG. Sisaldab tugevat tsingitud terast ja korrosioonikindlat kinnitusrihma.

Amperage Capacity	‎50 Amps
Batteries Included?	‎No
Batteries Required?	‎No
Brand	Eaton
Certification	‎NEMA
Color	Black
Color	‎Black
Compatible Devices	All
Country of Origin	‎China
Customer Reviews	4.6 4.6 out of 5 stars 491 ratings 4.6 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Finish	‎Black
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	2.16 x 2.43 x 4.69 inches
Item model number	‎WD1212
Item Package Quantity	‎1
Item Weight	‎11.3 ounces
Manufacturer	‎EATON
Material	Steel
Material	‎Steel
Number Of Pieces	‎1
Part Number	‎WD1212
Power Source	‎Wired Electric
Product Dimensions	‎2.16 x 2.43 x 4.69 inches
Voltage	‎125 Volts

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega^*

Teie hinnang

Scritto da: J D

Seems like a nice sturdy plug.

I wanted a brand name plug and this one met expectations. Connections we're solid. Plastic housing fit well. All good.

Scritto da: Jason Lewis

Fairly easy to install

Seems like a good product. Was easy to install. The only things I have questions on are the wire clamp, the single screw for the plastic hood, the screw terminals, and the neutral terminal. The wire clamp is screws to the outside of the box, but so far it seems to have kept up as an extension cords end. There is only one screw holding the front case to the back, so the part where your wiring goes may seem a little loose. The neutral screw is the tallest and works great for six gauge wire, but will be too high to mount the plastic case if you are a larger wire size. The screw terminals push the strands of stranded wire to the side, and seem like they are built for solid core wire. Other similar products use a brass plate to spread out where the screw pinchs the wires so that they have better contact.

Scritto da: Tom Sizemore

Ez install

Great product

Scritto da: joed

Be careful then ok

If your wires come from upper this one is well suitable for Tesla as it asks ground rod on top. You get to be careful to use it - not only comment from one star review, I found the U shape metal is too soft and the nut plate may come out of it. when you tight the screw make sure wire is just under it and push the nut plate incase it come out, then it works fine This is traditional simple design but shall be improved. Camco 14-50P has also simple design but has better nut plate which I recommended. Mine one missing one screw, it seems sb only counts to three - better than a bear that count upto 2. The screw must be #9 or more.

Scritto da: Jimmy

great outlet

Bought this to use on my RV power cord reel. It was much easier to wire than the replacement 50 amp plugs commonly used. I was not worried about it not being waterproof since it is installed in the electric bay and protected from the elements. Now I can easily install my surge suppressor in the electric bay and not leave it out visible on the power post. And if for any reason the surge suppressor stops working I can just unplug it and plug my transfer switch into it.

Scritto da: Lyndell Lyon

Good product

Excellent choice

Scritto da: Mark

Robust connections for a great price

Used this to install a 50a surge protector in the basement storage of my RV. 14-50 receptacle with heavy duty connections and a great price, wish I could have found a quality plug as easily. Ended up using the Miady 50AMP RV Replacement Male Plug, and it's good as well.

Scritto da: Amazon Customer

Easy Install

Nice quality. Like the easy front access on the contacts. The thick copper would have been hard to land without that feature.

Scritto da: Gary

Quality Surface Mount Receptacle

Needed a 50 amp receptacle for my welding unit. Knowing Cooper is a well established manufacture of electrical devices, ordered this part and installed under my sub-panel in the garage. No issues and delivery was very prompt. Would not hesitate to order again, if it was required.

Scritto da: DE

Works Great

I used this to convert a dryer cable that I had to a Nema 14-50 plug for my Tesla Model 3. I wasn't able to find one of these at the big box stores. Amazon always has the stuff I can't find in the stores and the price was good. I can plug into a dryer outlet and then plug in my Tesla mobile charger. This will give me 24 amps for charging.

Scritto da: Don Sutherland

Industrial Quality

The connector is very ruggedly built, the total opposite of flimsy. I am using it for an extension cable for my EV charger. Highly recommended.

Scritto da: JZ

Great surface mount NEMA 14-50 option

mount was easy to install, price was good, so far seems pretty durable. This is NOT a waterproof unit so it is only suitable for indoor/garage installation.

Scritto da: Jane D.

Worked perfectly

Worked perfectly for re-location of stove plug to a place that did not allow for a recessed outlet