0
0

Kokku:€ 0.00

Vaata ostukorviKassasse
LoginRegister
0

Kokku:€ 0.00

Vaata ostukorviKassasse
LoginRegister

Eagle'i 20 galloni päästetünn metallrõnga hoova lukustuskaanega, kõrgus 21, läbimõõt 21, puhutud HDPE, kollane, 1654

Brand:Eagle

3.7/5

€
338.30

Aastakümneid on Eagle'i kasvav plastikust tünnide valik vastanud tahkete materjalide ohutu ladustamise ja transportimise vajadusele. Eagle Blue 20-gallonine plastiktrummel on valmistatud sinisest puhumisvormitud kõrgtihedast polüetüleenist (HDPE) koos UV-inhibiitoritega, see on vastupidav ja kerge, ilmastiku- ja kemikaalikindel ning sellel on metallist hoob-lukuga riba. Ideaalne ohtlike materjalide ohutuks ladustamiseks, käitlemiseks ja transportimiseks, lekete piiramiseks, ohtlike materjalide puhastamiseks, originaalkonteineriks, biojäätmete kõrvaldamiseks ja põletamiseks. Eagle'i trumme pakutakse kolmes avatud peaga stiilis: laboripakendid, lisapakid ja päästetrummid. Trummid on saadaval erineva võimsusega koos värvi, kaane tüübi ja sulguriga ning neid saab tellida üksikute või kaubaaluste kogustes.

Ühikuid pole saadaval

EAN: 0048441603084

Kategooriad Tööstus ja teadus, Keskkonna- ja tööohutustooted, Ohtlike materjalide käitlemine, Ohtlike ainete ladustamisvahendid, Trumlid,

Vastab DOT eeskirjale 173.3, HM-181 ja ÜRO standarditele ohtlike materjalide pakendamise ja saatmise kohta; on läbinud lekkekindluse testi 3 psig. Sellel on 20 galloni salvestusmaht; kaalub 15 naela; mõõdab umbes 21 kõrgust ja 21 läbimõõtu. Sisemised mõõtmed - 19 (48,3 cm) ülemine x 16 5/16 (41,4 cm) alumine x 19 (48,3 cm) kõrgus tolli. Metallist kangi lukustusrõngast saab kasutada kaane kinnitamiseks trumli külge; suletud pooridega vahttihend aitab vältida lekkeid. Valmistatud kollasest HDPE-st, mis kaalub vähem kui teras, on mõlkide, läbitorkamiste ja teatud kemikaalide suhtes vastupidav ning seda võib põletada. Salvestustrumlil on plastikust kaas ja seda saab kasutada ohtlike materjalide väikeste konteinerite hoidmiseks, transportimiseks ja kõrvaldamiseks ning lekete ohjeldamiseks.
Country of Origin USA
Domestic Shipping Currently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues.
International Shipping This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer No
Item model number 1654
Manufacturer Eagle Manufacturing
Product Dimensions 21 x 21 x 21 inches; 0.16 Ounces

3.7

5 Review
5 Star
82
4 Star
11
3 Star
3
2 Star
2
1 Star
2

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega*

Scritto da: Johnnie N.
Works well with the Oneida Super Dust Deputy 4"
As noted in the headline, I bought this to use with the Oneida Super Dust Deputy 4" version. The bulging lid does not affect the fit for this unit since it has a wide flange with a lot of bolts. In short, this seems to work perfectly. The pictures above show how I drilled a center hole then made circles with a sharpie to see how the DD would fit. I used a small section of lightweight chain to make a compass to draw my inner circle at 7" from center (14" diameter). The outer circle was drawn with the DD laid on top just to see where the bolt flange would sit. The second picture shows the hole I cut with a jigsaw and the holes I drilled for the bolts. I drilled a hole and added a bolt finger tight then proceeded with more in a star pattern. Of course make sure that all of the holes will avoid the strengthening ribs inside the lid. The third picture is the finished fitted connection. I noted the hole in the front of the unit on the lid so it would be put back in the exact same orientation after removing it to install the gasket. I left it sitting overnight in case the new hole caused any flexing, but I doubt that was necessary. The last picture is the installation of the gasket before screwing it down wrench tight. After getting it back together the seal seems very good. I plan on using the old incense trick to look for any leaks but there is no way I will be globbing on a tube of silicone like I see in a lot of videos. I connected it to my 1HP ShopFox with a short section of flex hose and connected another flex hose with a vacuum fitting to suck up some various accidental and on-purpose dust spills. The Oneida and Eagle drum worked perfectly. My formerly empty collector bag and filter bag got a very small amount of dust. I am considering a direct exhaust outdoors at some point but right now I will cart around the hose and see how well my new toy (I mean personal protection device) works in my little shop. If anything does not work well or if I see any issues others that might help others I will update my review.
Scritto da: WayBetta
Perfect!
I paired this with a powertec 1 micron dust bag. I'm definitely pleased with my setup and product.
Scritto da: JT
Great Drum
Much drum, very large, so yellow, wow! seriously though, this drum is very durable and sturdy, comes with a great sealing top and a removable metal band. I use it for my dust collector, the top seals so well that I don't need to use the metal band.
Scritto da: JT_Woodcraft
Great dust collector barrel
Works great as a dust collector barrel. I have a one car garage and can’t afford for my dust collector to be on the ground and was very happy to find a barrel that is short and wide to allow me to mount my 2hp dust collector just below the ceiling and still be able to park my router table underneath. Lid works well but I recommend reinforcing it with plywood if you do use it for dust collection unless you have the super dust deputy 4 with the wide bottom mount. Lock ring holds firm yet removed easily enough for the weekly emptying. Only modification coming is a strip of lexan put on the side close to the top so I can view the dust level. Others have mentioned it being opaque but I can’t seem to get light to pass thru it.
Scritto da: Terrence Walsh
Great base for a Dust Deputy
Used as a base to mountThe Dust Deputy DIY Standalone Anti-Static Cyclone Separator . Worked perfectly. The lid is thick enough and has enough arch to stand up to the vacuum from either my Ridgid shop vac or Festool dust extractor. I had no problem with deforming or collapsing even when the pick-up hose clogged while the vacuum kept running. Construction notes: 1. The bottom of the Dust Deputy needs a 3-inch hole in the drum lid. With a lot of patience and care the hole could be cut with a sharp utility knife but the plastic is thick. A hole saw is the way to go. I usedMilwaukee 49-56-0173 3-Inch Ice Hardened Hole Saw mounted onDEWALT DW1803 Heavy Duty 7/16-Inch Shank Quick Change Mandrel (Fits Hole Saws 1-1/4-Inch - 6-Inch) . 2. For securing the Dust Deputy to the lid I used six 1/4-inch bolts and nuts, which worked fine. I also used washers on both sides and split washers with the nuts. 3. It helps to have gasketing between the Dust Deputy and the lid. I cut my own gasket from some shower pan sheet leftovers. That worked very well but took time. It would be quicker to use gasket-in-a-tube like an RTV sealant that is compatible with plastic, or a good caulk. This is the second time I've mounted a Dusty Deputy on a drum. This yellow drum was better than my previous effort. This drum is wider, thus more stable. It's a bit shorter so doesn't get in the way as much. The capacity is amazing. The lid did not need any plywood reinforcement. I like the handles, too. My previous Dust Deputy was mounted onEagle 1610MB Blue High Density Polyethylene Lab Pack Drum with Metal Lever-lock Lid, 14 gallon Capacity, 26.5" Height, 15" Diameter . That worked fine. The blue drum is narrower and gets through doorways more easily. The blue drum's lid needed reinforcement where the yellow drum's lid was already strong enough. The blue drum has no handles while the yellow drum's handles really help when it's time to empty it. I hope this helps someone who's trying to improve their dust collection.

Seotud tooted

hot
Eagle 14 galloni suure tihedusega polüetüleenist laborikomplektiga tünnitrummel metallist hoovalukuga kaanega, kõrgus 26,5, läbimõõt 15, sinine, 1610 MB
3.6/5

€ 244.76

Eagle 14 galloni suure tihedusega polüetüleenist laborikomplektiga tünnitrummel metallist hoovalukuga kaanega, kõrgus 26,5, läbimõõt 15, sinine, 1610 MB
3.6/5

€ 244.76

hot
Eagle'i 20 galloni päästetünn metallrõnga hoova lukustuskaanega, kõrgus 21, läbimõõt 21, puhutud HDPE, kollane, 1654
3.7/5

€ 338.30

Eagle'i 20 galloni päästetünn metallrõnga hoova lukustuskaanega, kõrgus 21, läbimõõt 21, puhutud HDPE, kollane, 1654
3.7/5

€ 338.30

Avastage meie rahvusvaheline võrgustik

Saadame 28 riiki, üle 200 000 toote. Olge kursis, tellige uudiskiri.

Array

Kokku:€ 0.00

Vaata ostukorviKassasse

Kategooriad

Kõik kategooriad
Menüü Kategooriad Lähedal Käru

Menu