Dremel 420 lõikeketas, läbimõõt 15/16 (23,8 mm), ketta paksus 0,40 tolli (1,0 mm), pöörleva lõikeriista tarvik (20 tükki), hõbedane

Name: Dremel 420 lõikeketas, läbimõõt 15/16 (23,8 mm), ketta paksus 0,40 tolli (1,0 mm), pöörleva lõikeriista tarvik (20 tükki), hõbedane
Brand: Dremel
SKU: 640026953777
Price: 25.67 EUR
Availability: InStock

Brand:Dremel

3.7/5

€
25.67

TOOTE KIRJELDUS Kasutage oma Dremeli pöörlevaid tööriistu maksimaalselt, kasutades meie uuenduslikku ja ulatuslikku pöörlevate tarvikute ja lisaseadmete sarja. Olenemata teie projektist on meil teile ideaalne lahendus. Dremeli tarvikud sobivad teie pöörleva tööriista sisse, et suurendada selle mitmekülgsust. Olenemata sellest, kas soovite nikerdada, graveerida, lõigata, lihvida või lihvida, on olemas Dremeli tarvik, et töö saaks täpselt tehtud. Seetõttu võimaldavad meie spetsiaalselt ehitatud Dremeli tarvikud teil oma projekti viimse detailini viia. Dremeli tarvikud on samuti värvikoodiga kasutuskategooriatesse, et oleks lihtsam oma projekti jaoks õiget tarvikut valida. Muutke oma Dremeli pöörlev tööriist 420 Dremeli lõikeketastega lõikemasinaks. Sobib igat tüüpi metallide, näiteks karastatud terase, lehtmetalli või alumiiniumi viilutamiseks, sirgete lõigete ja pilude tegemiseks. Lõikeratastel on 15/16 tolli. (23,8 mm) ratta läbimõõt ja 0,04 tolli. (1,0 mm) paksune tera, mis muudab selle ideaalseks mitmesuguste metallide, õhukese puidu või plastide lõikamiseks, soonimiseks ja lõikamiseks; saab kasutada ka roostetanud või katkiste poltide ja kruvide pilude tegemiseks. Kasutamiseks ainult 402 südamikuga. Pakis 20 ratast. Ühildub kõigi Dremeli juhtmega ja aku pöörlevate tööriistadega. Pole vaja otsida õiget kinnitust, kõigil Dremeli pöörlevatel tarvikutel on 1/8-tolline standardne vars. AMAZON.COM Dremeli 15/16-tolline raskeveokite lõikeratas sobib ideaalselt igasuguste metallide lõikamiseks, soonimiseks ja lõikamiseks. Seda saab kasutada ka muude materjalide, sealhulgas õhukese puidu, plasti ja keraamika puhul. See lõikeketas on valmistatud kõvast abrasiivist, mida kasutatakse metalli, sealhulgas karastatud terase, viilutamiseks ja lõikamiseks. Selle ratta abil on lihtne polte ja kruvisid lõigata ning roostetanud või katkistunud poltidele ja kruvidele kruvikeerajaga eemaldamiseks pilud teha. See 1/2-tolline paksune poleerimisratas on saadaval 20 tk.

Ühikuid pole saadaval

EAN: 640026953777

Kategooriad Tööriistad ja kodukaubad, Elektri- ja käsitööriistad, Elektritööriistade osad ja tarvikud, Ehituspinkide osad ja tarvikud, Lõiketerad,

Kasutamiseks koos pöörlevate tööriistadega, mille varre suurus on 1/8. Lõikeketas lõikab ainult mööda selle serva. Ärge püüdke nendega lihvida ega kõveraid auke lõigata. Ideaalne pilu poltide, kruvide, lehtmetalli ja õhukese puidu lõikamiseks. Muutke oma pöörlev tööriist lõikemasinaks.

Assembled Diameter	23.8 Millimeters
Assembled Diameter	‎23.8 Millimeters
Batteries Included?	‎No
Batteries Required?	‎No
Brand	Dremel
Color	‎Silver
Construction Type	Cut-off Wheels
Country of Origin	‎China
Customer Reviews	4.6 4.6 out of 5 stars 1,212 ratings 4.6 out of 5 stars
Cutting Diameter	‎23.8 Millimeters
Grit Number	180
Grit Rating	‎180
Is Discontinued By Manufacturer	‎No
Item model number	‎420
Item Package Quantity	‎20
Item Weight	‎0.192 ounces
Manufacturer	‎Dremel
Material	‎hard abrasive material
National Stock Number	‎3460-01-275-4363
Part Number	‎420
Product Dimensions	0.94"L x 0.94"W
Warranty Description	‎No

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega^*

Teie hinnang

Scritto da: Donald Scheer

Most Used Dremel Item I Use!

I Use These Often! So I Need A Lot Of Them! They Do A Great Job! Like All Cut-off Wheels They Wear Out Or Break! But, They Arer A Great Prodsuct.

Scritto da: Brian K Johnson

Cut of discs

These cut off discs work fine but they are not strong, they break fairly easily, but they are very inexpensive so they are still useful.

Scritto da: Rich

Did what it supposed to do.

Durable and holds to cut metal. Better than snapped on Dremel wheel. Highly recommended.

Scritto da: Whale

When you are tired of breaking cuttoff wheels, get this

Cut off tools are for cutting shafts that are usually hard steel and not so thick. But when the going gets rough and you need to cut aluminum pieces that are soft and explode your nice think blades, this is the one you need. It will deal with a lot more lateral side loads and can remove material besides just cut a slot. If I need a cut in a hardened piece of steel, the then thin cutoff tools work. But if i need to cut out a piece from an aluminum sheet or maybe remove some excess aluminum weld material, the thicker cut off wheel will last much longer although they may still explode if you force the issue. I use both cutoff tools and use the one that will survive. Usually the thicker one.

Scritto da: Nana and Pa

Excellent product

Working very well on hard steel material. Very pleased with quality of the wheels.

Scritto da: @4x4Erik

Awesome blades

These are an absolute a must have for me. I always have a supply of them. I will say, these seem to be a more coarse grit than the wheels I've had in the past, but that can also be a good thing. They last as good as any, and have worked for me.

Scritto da: David

Cut well

They work well but they are fragile. That’s why I bought so many.

Scritto da: Morse Wheeler

Dremel quality is just better than everything else

I've tried several other brands of less expensive cut-off wheels, but they have all been garbage and most lasted no more than a couple of seconds before disintegrating. Dremel wheels are just so much better...end of story. They are much thicker than the knock-offs, and unless you bind them in the workpiece, almost always wear all the way down as they should. The Dremel wheels are definitely in the category of "you get what you pay for".

Scritto da: J Le G

Great for my purposes.

Excellent for small jobs on the appropriate materials.

Scritto da: Amazon Customer

Exactly as described

I use these during my radio controlled aircraft building.

Scritto da: Steve Randall

Five Stars

Arrived safe

Scritto da: Frédéric J.

Very good "all-around" Cutting Wheel

Actually they're similar to those which came with my Dremel kit (I had only two, so I needed a refill of those "all-around" wheels). And I luv'em! I'm currently moding PC chassis, and they are perfect for : 1- Cutting through plastic, like butter. For instance I used it on an NZXT RGB LED Controler 5.25" plastic enclosure, as well as a SlimODD + 2x2.5"SSD/SSHD 5.25" bay adapter, cutting holes and redesigning edges on the sides so that I could run SATA, USB and Power wires "through" the bay controllers cage, leaving room for a Swiftech 280mm radiator plus its pump on the front lower side of the radiator (thus very tight to the bay cage). Their diameter is not too big, enough for that scale of craftsmanship. 2- Cutting curves on metal sheets. I'm using it while moding a Fractal Refine R4 PC chassis, for accommodating a 280mm CPU water cooler's radiator on the top panel ("opening" 27mm towards the left side panel: new "air vents" and mounting holes for 2x140mm fans - this mod clears the obstruction the motherboard's Power regulators Heat sinks had with the original chassis mounting holes vertical alignments - and which disallowed any 280mm radiators on the top panel). One of their "con", is also a "pro": they degrade relatively fast. I can thus use them for cutting curves, i.e. for rounding corners on steel (or aluminum) sheets, or for cutting out patterns/works of arts, their smaller radius giving more flexibility on curved lines. For straight lines or large arcs I prefer the Dremel 426 Fiberglass Reinforced, which have a bigger radius (1 1/4") for straighter cuts. I'd like to find 1 1/2 inch though, as I don't know if going with a "non-standard" proprietary mounting system like the EZ Lock (for which there's an offer of 1 1/2" cut-off Wheels), is really worth the investment...

Scritto da: Ray A

Not as heavy duty as one might expect.

Even though these disks are sold as heavy duty, take it with a grain of salt. Unless you are very careful when cutting material the disks will break and pieces of shrapnel will fly, so make sure you wear protective glasses to save your eyes!.