Digitaalne manomeeter, õhu- ja gaasirõhu tester, kahe pordiga diferentsiaalrõhumõõtur, suur LCD-ekraan taustvalgustusega Klein Tools ET180

Brand:Klein Tools

3.6/5

170.26

Klein Toolsi digitaalne diferentsiaalmanomeeter ET180 mõõdab õhu- ja gaasirõhku pordis 1 ja 2 ning mõõdab portide vahelist erinevust. Lihtne ühikute vahel vahetada: inH2O, baar, oz/in2, psi, mbar, kPa, inHg, mmHg, kg/cm2, ftH20 ja cmH2O. Suur taustvalgustusega LCD-ekraan näitab minimaalseid, maksimaalseid ja keskmisi väärtusi. Magnet tagaküljel käed-vabad kasutamiseks. Klein Tools on enam kui 160 aastat tootnud esmaklassilisi professionaalseid käsitööriistu, mis tagavad töö õigeks tegemiseks vajaliku jõudluse, vastupidavuse ja täpsuse. Meie inseneride, töötajate ja käsitööliste perekond jätkab kuue põlvkonna kogemuste panemist igasse tööriista, mille loome, kasutades ainult kõrgeima kvaliteediga materjale, parimat töötlust ja hoides tootmist nii kodu lähedal kui võimalik. Klein ei ole ainult meie ettevõtte nimi, see on ka meie perekonnanimi. Ja kuna me oleme Ameerika ettevõte, mis on pereettevõte ja pereettevõttena tegutsev, siis võite loota, et oleme homme siin. Klein Tools ei tooda mitte ainult suurepäraseid tooteid, vaid ka suurepäraseid tooteid, mis vastavad neid iga päev kasutavate professionaalide nõudmistele ... Alates 1857. aastast.

SUUR TAUSTVALGUSTUSEGA LCD-ekraan pakub lihtsat vaatamist vähese valgusega tingimustes ja näitab väärtusi minimaalse, maksimaalse ja keskmise vahel. ÜKSTEIST MÕÕTEÜHIKUST: saate hõlpsalt valida inH2O, baari, oz/in2, psi, mbar, kPa, inHg, mmHg, kg/cm2, ftH20 ja cmH2O vahel. TUGEV MAGNET TAGUSEL kindlustab manomeetri käed-vabad tööks. HVAC-süsteemide probleeme JÄLGI JA VEAOTSING, mille vahemik on +/- 60 inH2O ja täisskaala täpsus +/-1,5 protsenti. MÕÕTKE STAATILISE JA DIFERENTSIAALSE rõhku kahest õhu- ja gaasisüsteemide pordist.
Batteries 3 AAAA batteries required. (included)
Brand Klein Tools
Country of Origin China
Department Unisex-Adult
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 1 x 1 x 1 inches
Item model number ET180
Item Weight 5.92 Ounces
Manufacturer Klein Tools
Material Blend
Product Dimensions 1 x 1 x 1 inches; 5.92 Ounces

3.6

9 Review
5 Star
75
4 Star
15
3 Star
6
2 Star
2
1 Star
3

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega*

Scritto da: Pat Thompson
Magically repaired my heater
Had a problem with my heater tripping from the pressure sensors not seeing enough draft. Got this to diagnose. Hooked it up with the 1900 feet of hose it comes with and measured pressure. Exactly where it’s supposed to be. Great. Waited around for the fault condition to occur: IT HAS NEVER OCCURRED AGAIN in 3 1/2 months! I, uh, just left it plumbed in and backed slowly away. Problem solved!
Scritto da: james
Case sucks.
I started with some other brand which did a decent job but with the Klein I can measure differential pressure which is much better. Could use at least one barb fitting for the price I paid for this. That 'other brand' came with one and only cost $39.
Scritto da: Diane Henry
Did the job for testing self installed heat pump.
Works well
Scritto da: Tim
Great manometer.
Excellent meter with a string magnet on the back and a clear screen on the display. I use this to check the pressure of my LP system on my RV. I really like the magnet, as it allows me to attach it to the side of the propane tank as I'm taking a reading.
Scritto da: donald foglesonger
ok
not very accurate
Scritto da: Scott
Tiny hose
The manometer seems to work great. The hose is too small around and soft for what I need on gas valves.
Scritto da: Gary Gendel
Make sure you have a snug fit with your tubing
This is a basic unit that is simple to use and easy to read. I needed it to calibrate an ERV. I originally had a very hard time getting a stable reading and even using some stuffing around the tubing to make a better seal didn't help. I bought some natural latex tubing that had a better seal which made things much better and repeated readings were stable. The magnet in the back was very handy to affix the meter in a good location so my hands were free to make the adjustments. I have a second and bigger ERV to install but I'm confident that calibration will go smoothly. If I had to complain about something, it would be the case. It's pretty cheaply made and doesn't really have a good layout for the meter and tubing. But it does it's job.
Scritto da: Syed
Not the one you’re looking for
I bought this to diagnose the Honeywell gas valve on my furnace. Felt that Klein was name brand to go for. Unfortunately, this manometer doesn’t come with any barbed adapters to connect to plugs on the gas valve. I needed a 1/8 in MIP to barb adapter, which was impossible to find at local hardware stores. It’s a cheap piece they could have thrown in to make a complete kit. Incredibly frustrating that it was not included.
Scritto da: Wrench
Awesome Tool
This little tester works like a charm!

Seotud tooted

Avastage meie rahvusvaheline võrgustik

Saadame 28 riiki, üle 200 000 toote. Olge kursis, tellige uudiskiri.

Array