CURT 56320 sõidukipoolne kohandatud 4 kontaktiga haagise juhtmestik, sobib valitud Ford Escape'iga

Name: CURT 56320 sõidukipoolne kohandatud 4 kontaktiga haagise juhtmestik, sobib valitud Ford Escape'iga
Brand: CURT
SKU: 0612314563203
Price: 112.48 EUR
Availability: InStock

Brand:CURT

3.5/5

€
112.48

Kui teie sõidukil pole haagise vedamiseks vajalikku juhtmestikku, on CURT kohandatud juhtmestik ideaalne lahendus. Kohandatud juhtmestik – mida nimetatakse ka T-pistikuks – on lihtne plug-and-play elektriseade, mis ühendatakse teie auto elektrisüsteemiga ja tagab standardse universaalse haagise juhtmestiku. Seda tehakse kahe või enama sõidukispetsiifilise OEM-iga ühilduva pistiku abil, mis ühendatakse tagatulede komplektiga, välistades vajaduse paigaldamise ajal lõikamiseks, liitmiseks ja jootmiseks. Kohandatud juhtmestikud on valmistatud sõidukipõhiselt ja kuigi need pole kõigi sõidukite jaoks saadaval, pakuvad need üht kiireimat, lihtsaimat ja turvalisemat viisi sõiduki pukseerimiseks. Sellel konkreetsel pistikühendusel on neljasuunaline lame pistikupesa ja see on loodud kohandatud juhtmestikuna, mis sobib Ford Escape'i teatud aastate jaoks (sõidukiga ühilduvuse kontrollimiseks vaadake rakenduse teavet). Kaasas on kõik vajalikud juhtmestiku komponendid, et luua usaldusväärne haagise juhtmestiku ühendus, samuti tolmukate, mis hoiab konnektori puhtana, kui seda ei kasutata. Teil on silme ees pilt oma järgmisest sihtkohast – võib-olla on see teie lemmikpüügikohas randuv paat, võib-olla on see kämping, kust avaneb vaade mõnele looduse meistriteosele, või võib-olla on see järgmine suur töökoht. Selle pildi reaalsuseks muutmine nõuab aga enamat kui lihtsalt unistamist. See nõuab tugevat ühendust ja õiget võimsust. CURTi kohandatud juhtmestik on valmistatud tööstuse kõige keerukama tehnoloogiaga ja on loodud hõlpsaks paigaldamiseks, pakkudes teile pikaajalist elektriühendust veokonksu seadistamiseks.

Summa

Lisa ostukorvi Osta kohe

EAN: 0612314563203

Kategooriad Autotooted, Vahetusosad, Valgustus ja elektrik, Elektriline, Juhevõrgud,

TOLMUKATE. Pikaajalise kasutuse ja ilmastikukindluse tagamiseks on sellel 4-pooluselisel haagise valgustuse juhtmestikul kummist tolmukate. Kui seda ei kasutata, sobib see hõlpsasti 4-suunalise lamepistiku külge, kaitstes seda välistingimuste eest. USALDUSVÕIME. See 4-suunaline haagise juhtmestik on ehitatud pindpaigaldustehnoloogiaga. Seda tüüpi vooluringid toodavad vähem soojust, optimaalset valgustugevust ja vastupidavat jõudlust. SÕIDUKI SPETSIIFILINE. See järelturu haagise juhtmestik on mõeldud Ford Escape'i valitud aastate jaoks. STANDARDÜHENDUS. Seda pistikühendusega nelja tasapinnalise haagise juhtmestikku saab kasutada haagise tagatulede, piduritulede ja suunatulede ühendamiseks. 4-suunaline haagise tulede juhtmestik on populaarne paljudel haagistel, lisades teie sõidukile mitmekülgseid pukseerimisvõimalusi. LIHTNE PAIGALDADA. Ei mingit lõikamist! Ei mingit splaissimist! See haagise juhtmestiku komplekt ühendatakse teie sõiduki olemasoleva tehasejuhtmestikuga ja varustab selle standardse 4-kontaktilise haagise juhtmestiku pistikuga haagise ühendamiseks ja pukseerimiseks.

Brand	CURT
Brand	‎CURT
Connector Type	Plug-in
Country of Origin	‎Mexico
Customer Reviews	4.5 4.5 out of 5 stars 254 ratings 4.5 out of 5 stars
Exterior	‎Painted
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	9 x 6 x 3 inches
Item model number	‎56320
Item Weight	1.72 Pounds
Item Weight	‎1.72 pounds
Manufacturer	‎CURT
Manufacturer Part Number	‎56320
Material	Rubber
Model	‎Custom Wiring
OEM Part Number	‎56320
Product Dimensions	‎9 x 6 x 3 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega^*

Teie hinnang

Scritto da: phillip scarboro

Great easy installation

This product is a plug and play interface with the factory wiring. All you have to do is run a power wire to the battery from the back.

Scritto da: Larry

Works as it should, a lot of plastic has to be removed

The unit works great, but a lot of plastic and spare tire has to be removed

Scritto da: Bangster

Very infrequent towing of a Horrible Fright folding trailer that I upgraded to the LED ...

This one actually fits my 2017 Escape, I should have done more due diligence and not listened to Amazons "this will fit your car" for the harness for the 2013-2016 Escape. I did cut it up so I didn't have to make hack and make giant holes for the entire connector to pass through to the tail lights, and I didn't run the wire to the front to the battery, but I utilized a fuse tap and the cargo area fuse panel, 5 feet of wire versus 20 running under the car. Everything was long enough, only part of the instructions I read was what side the single green wire went to. I was going to reverse engineer it to mount the box on the passenger side close to the power, but decided I might be pushing my luck. I chose to keep the 4 pin end bundled up in the spare tire well and will feed it out the lift gate bottom/gasket when connecting to a trailer. Tested it with a small light tester and with the trailer itself, everything works, doesn't cause any issues with the vehicle's lights. Very infrequent towing of a Horrible Fright folding trailer that I upgraded to the LED lights, but I am sure this would have driven the incandescent lights as well. Might try that out if I get a cargo hauler and feel it might cover the tail lights, toss the shipped lights on it. Easy to install, like that it is inside the vehicle and not mounted outside and wires ran outside, but were I live it really wouldn't matter.

Scritto da: GARY L GOLDSMITH

Works great.

Not really that hard to install. Took me maybe 2 hours taking my time. I'm still not sure why the vendor opposes connecting the power source wire to the extra fuse panel in the rear of a 2018 Ford Escape Titanium ! It has constant power ! Using something like the AutoEC ATO ATC 21AMP Add-A-Circuit Fuse Holder Fuse Box Tap Kit would work fine. But since they don't support that Option I ran it to the battery which was pretty simple on the Escape hiding it above the drivers skid pan . I will also say I could not get the harness end inside the CURT 58300 Vehicle-Side Trailer Wiring Harness Mounting Bracket for 4-Way Flat. I tried everything

Scritto da: Ron

Easy install

Ford installed there version at the dealership when first owner purchased. After we bought car used, we later found out that brake lights didn't work for towing. Purchased this unit and installed the correct way. Works perfect.

Scritto da: Jake W ia

Fast "Plug & Play" Install. Under 1hr and done.

Installed by myself on my 2018 Ford Escape (SEL) Perfect!!! Install took just under 1hr with the right tools and a general idea of where to run and hide the wires. Direct Plug and Play set up with only wiring work needed was positive terminal hook up. Saved a couple hours compared to a universal wiring kit where you'd have to hunt down each wire coming off your tail light to splice into. Not to mention you'd have to alter factory wiring.. with this kit, you do not alter any factory wiring at all! All my trailer lights work perfectly when plugged into this harness. And I couldn't beat the Amazon Warehouse Pricing!!!

Scritto da: Benjamin Sutton

Perfect fit for 2017 Ford Escape Titanium

Had some issues finding a wiring harness that would fit my 2017 Ford Escape Titanium. After some research I found this product along with installation instructions on eTrailer's Youtube. It fits just as advertised! As for the product itself, I was impressed with how easy it was to install, even if it didn't come with the best instructions (just watch the video instead!). I drove over 600 miles this weekend hauling a small trailer with LED lights and had no issues. If you are looking for a trailer wiring harness for your 2017 Ford Escape Titanium, this is what you need!

Scritto da: Kathryn S

Mostly good

Does NOT work with the Hopkins 48595 mounting bracket as another review mentioned. The shape is completely different. I'm mostly happy with this wiring harness for my 2017 Ford Escape Titanium. I was able to get all of it installed myself. I ran the power wire to an unused fuse in the cargo area fuse box. My only negative is that the instructions have no mention of the fact that my Escape has some sort of part in the way of where it says to mount the black box. I had to zip tie the box beneath that same metal piece.

Scritto da: Greg B.

Returned defective.

Got a defective one, 1 of the circuits didn't work had to return. Refund no problem. Got a second one works great have used Curt products on other vehicles with no problem.

Scritto da: Customer

Positive purchase.

Ease of installation and worked as advertised.

Scritto da: vern

Worked perfectly

Easy to install, good instructions, worked as described

Scritto da: TaylorMartine

Included instructions are bad

I was able to install this easily after looking up a video with much better instructions.

Scritto da: waveyq

Worked for my car

followed instruction to install it. not easy one but worked finally.