CURT 56245 sõidukipoolne kohandatud 4 kontaktiga haagise juhtmestik, sobib Chevrolet Traverse'i, GMC Acadia, Buick Enclave'iga

Name: CURT 56245 sõidukipoolne kohandatud 4 kontaktiga haagise juhtmestik, sobib Chevrolet Traverse'i, GMC Acadia, Buick Enclave'iga
Brand: CURT
SKU: 0612314562459
Price: 68.04 EUR
Availability: InStock

Brand:CURT

3.8/5

€
68.04

CURTi kohandatud juhtmestiku pistikud on lihtsaim viis oma sõiduki varustamiseks CURT-i haagise juhtmestikuga. Need on ehitatud tööstuse kõige arenenuma tehnoloogiaga ning igaüks neist on kohandatud töötama konkreetse margi ja mudeliga. Mõned autotootjad paigaldavad sõidukile spetsiaalse pistikupesa, mida kasutatakse sõiduki ja haagise juhtmestiku ühendamiseks. Kuigi see spetsiaalne pistikupesa ei ole igal sõidukil varustatud, kasutab CURT kohandatud juhtmekonnektor – mida nimetatakse ka T-pistikuks – pistikupesa lihtsaks ja pingevabaks paigaldamiseks. Selle asemel, et nõuda sõiduki juhtmestiku lõikamist, liitmist ja jootmist, kasutab kohandatud juhtmekonnektor üht originaalseadmete tootjaga ühilduvat pistikut ja tagab kohe standardse universaalse sõiduki ja haagise juhtmestiku, tavaliselt neljasuunalise ühendusena. tasane. Kõik CURTi kohandatud juhtmestiku pistikud on tehtud sõidukispetsiifilisteks, et tagada võimalikult lihtne paigaldus ja parim sobivus. See konkreetne pistikpistik pakub 4-suunalist lamedat pistikupesa ja on loodud olema kohandatud juhtmestiku valik Chevy Traverse'i, GMC Acadia ja Buick Enclave'i teatud aastate jaoks (vajalik on tehase pukseerimispakett; sõiduki ühilduvuse kontrollimiseks vaadake rakenduse teavet ). See on varustatud kogu vajaliku riistvaraga kindla ühenduse loomiseks. Kaasas on ka tolmukate, mis hoiab pistikupesa puhtana, kui seda ei kasutata. Pikaajalise töökindluse tagamiseks testitakse kõiki CURTi kohandatud juhtmeühendusi optimaalse funktsionaalsuse tagamiseks põhjalikult. Stress on viimane asi, mida peaksite haagise vedamisel tundma – olenemata sellest, kas vedate oma haagissuvilat sellesse lemmiklaagrisse, ATV-d jahimaadele või kalalaeva uude peidetud leviala. CURTis arvame, et teie pukseerimisvarustus peaks teie kogemust nautima, mitte seda vähendama.

Summa

Lisa ostukorvi Osta kohe

EAN: 0612314562459

Kategooriad Autotooted, Emberkauba tarvikud, Pukseerimistooted ja vintsid, Koormakinnitused Lisatarvikud, Juhmestik,

TOLMUKATE. Pikaajalise kasutuse ja ilmastikukindluse tagamiseks on sellel 4-pooluselisel haagise valgustuse juhtmestikul kummist tolmukate. Kui seda ei kasutata, sobib see hõlpsasti 4-suunalise lamepistiku külge, kaitstes seda välistingimuste eest. LIHTNE HAARDE. Selle sõiduki pistikupesa ergonoomilise disainiga on haagise juhtmestiku ja haagise tulede ühendamine lihtne. Selle üla- ja alaosas on sakid, mis tagavad parema haarde haagisega ühendamisel või vooluvõrgust lahti ühendamisel. SÕIDUKI SPETSIIFILINE. See järelturu haagise juhtmestik on mõeldud Chevrolet Traverse'i, GMC Acadia ja Buick Enclave'i valitud aastate jaoks (vajalik on tehase pukseerimispakett). STANDARDÜHENDUS. Seda pistikühendusega nelja tasapinnalise haagise juhtmestikku saab kasutada haagise tagatulede, piduritulede ja suunatulede ühendamiseks. 4-suunaline haagise tulede juhtmestik on populaarne paljude haagiste puhul, lisades teie sõidukile mitmekülgseid pukseerimisvõimalusi. LIHTNE PAIGALDADA. Ei mingit lõikamist! Ei mingit splaissimist! See haagise juhtmestiku komplekt ühendatakse teie sõiduki olemasoleva tehasejuhtmestikuga ja varustab selle standardse 4-kontaktilise haagise juhtmestiku pistikuga haagise ühendamiseks ja pukseerimiseks.

Brand	CURT
Brand	‎CURT
Country of Origin	‎USA
Customer Reviews	4.7 4.7 out of 5 stars 574 ratings 4.7 out of 5 stars
Exterior	‎Smooth
Finish Type	Powder Coated
Is Discontinued By Manufacturer	‎No
Item model number	‎56245
Item Weight	0.44 Pounds
Item Weight	‎7 ounces
Manufacturer	‎Curt Manufacturing
Manufacturer Part Number	‎56245
Material	Rubber
Model	‎Custom Wiring
OEM Part Number	‎BKDK56245
Product Dimensions	‎9 x 4 x 2 inches
Vehicle Service Type	Marine-Personal-Craft, ATV, Trailer

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega^*

Teie hinnang

Scritto da: Greg Monett

Long thin arms would help

I had to jack up the SUV, remove the rear passenger wheel and the lossen the fender liner. If I had thinner forearms it would have gone in easier, the product works as designed. Great wiring, along with fuses and relays.

Scritto da: Thomas Snook

Perfect fit, all needed fuses and relays included

This part is perfect, was difficult to instalk thanks to GM Corp. J needed to use included fuses and relays to get trailer lights to work. Highly recommend

Scritto da: Amazon Customer

The product is good and the instructions are pretty straight-forward

The product is good and the instructions are pretty straight-forward, but the wiring is a pain to connect to the wire harness of a 2014 GMC Acadia due to GMC's placement. The fuses and relays are simple to install and the instructions are clear. For the 2014 Acadia, the battery is in the floor behind front passenger seat (slide the front passenger seat all the way forward, open the rear passenger-side door, flip up the floor mat, remove the plastic cover under the passenger seat, and I think I used a t-20 torx bit to remove the screw holding the battery cover on, and then I used a 10mm socket to remove the negative battery cable). After removing several screws to the inner fender cover, you pry the cover to the side and you'll see the wiring harness inside, toward the rear. The harness is mounted to the cars body on a plastic "clip". The harness can be slid off of the clip to allow just enough movement to plug the Curt harness to it. Then I slid the harness back onto the clip, reattached the inner fender and reconnected the battery. I ran the Curt harness to the bumper mount and ran it inside the frame, and popped it out through the access hole for installing the hitch. Thinking baout it now, I probably need to wrap tape around it where it comees out of the hole to protect it from abrasion.

Scritto da: Jonathan

Great product

It was so easy to install and all the parts to install it were there ????

Scritto da: Phillip Brittain

Perfect for my vehicle

Worked perfectly

Scritto da: J Batey

Very easy install, but a bit pricey

I installed this on my 2017 Chevy Traverse. Very nice that the Traverse is prewired for this. The directions state that the rear wheel and wheel well cover need to be taken off. There's no reason to do this - just feel for the plug on the vehicle and attach it blind. There is only one plug in that location and it can only be inserted in one direction, so you do not absolutely need to see what you are doing. Save yourself the headache of removing what the directions state to remove! This is a nice wiring harness, but I do believe it is a little pricey for what you get, granted you do get all the relays and fuses that you need as well.

Scritto da: ARS

Worked perfectly.

Installed on my 2014 Chevy Traverse. It comes with good instructions. I followed them and it works perfectly on my boat trailer. Note it can be difficult to see the small numbers in the fuse box for each fuse you have to install so get in good lighting.

Scritto da: don campbell

Right turn /brake light quit working used it 2 times

It’s is hard to install because of where the manufacture of the car put it

Scritto da: Rob

Awesome fit and easy install!

Nothing that was listed from Reese for my 2014 Buick Enclave would fit. Curt had the solution and it was easy to install. Great product.

Scritto da: Amazon Customer

Worked

Fairly easy to hookup and use. Worked like a charm

Scritto da: Chris

price

I like this product it was perfect and came as described and the price was good.

Scritto da: Emily Kennedy

Perfect

Perfect for my 2016 Chevrolet Traverse LS! Plug and play, easy to install!

Scritto da: Marcel

Easy to follow instructions, plug and play connection

Just follow the instruction and the install will be easy and smooth! you will need to provide some of your own longer tywraps to secure wiring but no big deal.