CURT 56127 sõidukipoolne kohandatud 4 kontaktiga haagise juhtmestik, sobib valitud Mitsubishi RVR, Outlander Sport, Lancer, must

Name: CURT 56127 sõidukipoolne kohandatud 4 kontaktiga haagise juhtmestik, sobib valitud Mitsubishi RVR, Outlander Sport, Lancer, must
Brand: CURT
SKU: 0612314561278
Price: 108.59 EUR
Availability: InStock

Brand:CURT

3.6/5

€
108.59

Kui teie sõidukil pole haagise vedamiseks vajalikku juhtmestikku, on CURT kohandatud juhtmestik ideaalne lahendus. Kohandatud juhtmestik – mida nimetatakse ka T-pistikuks – on lihtne plug-and-play elektriseade, mis ühendatakse teie auto elektrisüsteemiga ja tagab standardse universaalse haagise juhtmestiku. Seda tehakse kahe või enama sõidukispetsiifilise OEM-iga ühilduva pistiku abil, mis ühendatakse tagatulede komplektiga, välistades vajaduse paigaldamise ajal lõikamiseks, liitmiseks ja jootmiseks. Kohandatud juhtmestikud on valmistatud sõidukipõhiselt ja kuigi need pole kõigi sõidukite jaoks saadaval, pakuvad need üht kiireimat, lihtsaimat ja turvalisemat viisi sõiduki pukseerimiseks. Sellel konkreetsel pistikühendusel on neljasuunaline lame pistikupesa ja see on loodud kohandatud juhtmestikuna, mis sobib teatud aastate Mitsubishi RVR-i, Outlander Sporti ja Lanceriga (sõidukite ühilduvuse kontrollimiseks vaadake rakenduse teavet). Kaasas on kõik vajalikud juhtmestiku komponendid, et luua usaldusväärne haagise juhtmestiku ühendus, samuti tolmukate, mis hoiab konnektori puhtana, kui seda ei kasutata. Teil on silme ees pilt oma järgmisest sihtkohast – võib-olla on see teie lemmikpüügikohas randuv paat, võib-olla on see kämping, kust avaneb vaade mõnele looduse meistriteosele, või võib-olla on see järgmine suur töökoht. Selle pildi reaalsuseks muutmine nõuab aga enamat kui lihtsalt unistamist. See nõuab tugevat ühendust ja õiget võimsust. CURTi kohandatud juhtmestik on valmistatud tööstuse kõige keerukama tehnoloogiaga ja on loodud hõlpsaks paigaldamiseks, pakkudes teile pikaajalist elektriühendust veokonksu seadistamiseks.

Summa

Lisa ostukorvi Osta kohe

EAN: 0612314561278

Kategooriad Autotooted, Emberkauba tarvikud, Trailerite tarvikud, Juhe,

TOLMUKATE. Pikaajalise kasutuse ja ilmastikukindluse tagamiseks on sellel 4-pooluselisel haagise valgustuse juhtmestikul kummist tolmukate. Kui seda ei kasutata, sobib see hõlpsasti 4-suunalise lamepistiku külge, kaitstes seda välistingimuste eest. USALDUSVÕIME. See 4-suunaline haagise juhtmestik on ehitatud pindpaigaldustehnoloogiaga. Seda tüüpi vooluringid toodavad vähem soojust, optimaalset valgustugevust ja vastupidavat jõudlust. SÕIDUKISPETSIIFILINE. See järelturu haagise juhtmestik on mõeldud Mitsubishi RVR, Outlander Sport ja Lanceri valitud aastate jaoks. STANDARDÜHENDUS. Seda pistikühendusega nelja tasapinnalise haagise juhtmestikku saab kasutada haagise tagatulede, piduritulede ja suunatulede ühendamiseks. 4-suunaline haagise tulede juhtmestik on populaarne paljudel haagistel, lisades teie sõidukile mitmekülgseid pukseerimisvõimalusi. LIHTNE PAIGALDADA. Ei mingit lõikamist! Ei mingit splaissimist! See haagise juhtmestiku komplekt ühendatakse teie sõiduki olemasoleva tehasejuhtmestikuga ja varustab selle standardse 4-kontaktilise haagise juhtmestiku pistikuga haagise ühendamiseks ja pukseerimiseks.

Brand	CURT
Brand	‎CURT
Country of Origin	‎USA
Customer Reviews	4.5 4.5 out of 5 stars 142 ratings 4.5 out of 5 stars
Exterior	‎Painted
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	9 x 6 x 3 inches
Item model number	‎56127
Item Weight	1.73 Pounds
Item Weight	‎1.73 pounds
Manufacturer	‎Curt Manufacturing
Manufacturer Part Number	‎56127
Material	Rubber
Model	‎Custom Wiring
OEM Part Number	‎56127
Product Dimensions	‎9 x 6 x 3 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega^*

Teie hinnang

Scritto da: john zawistoski

Watch car fit,

Was a good quality, but did not fit my car for the year made.

Scritto da: Daniel

Easy to Install!

Overall it’s an easy installation. however you will find running the cable to the battery a little tricky but not super hard if you are resourceful.

Scritto da: James Houghton

Mostly easy to install, except the 12V battery cable

I got this for a Mitsubishi Outlander Sport. The connections to the existing brake light connectors was easy and the instructions were very clear. Mounting the controller was also easy and it is nice that this kit comes with everything you need. The only weird thing was the battery connections wire. If I ran it through the passenger cabin from the trunk area to the front, there was no clear place to get a wire into the engine compartment without a lot of work. Fortunately I was able to poke it through a rubber grommet in the rear compartment and run it under the car to the battery. There were enough zip ties included to secure the cable from the rear to the front adequately, but I would recommend adding a few additional zip ties just to be sure. The controller worked perfectly when I connected it to my trailer and despite the extra work in getting it installed, I am quite happy with the results.

Scritto da: Wade

Works great

Works exactly as I would've hoped, installation was a bit hard, the interior panels in the trunk had to be removed, and I had to come up with my own power source in the trunk for the wires, it would've been very hard to get a power wire from the trunk to the battery like the instructions say. I had no plans of drilling holes in the car. Overall works great to run the lights for our jetski trailer

Scritto da: Chad R Baxter

Complicated Install

Makes you run a power wire from the battery all the way to the back of the vehicle for power, shouldn't be a need for this. Should draw power from the tail lights you splice into

Scritto da: C. Lane

Simple to install and works!

Hardest part was running wire to battery, everything else is plug and play!

Scritto da: jim

Great product

Great product

Scritto da: Todd Whipple

Plug and play EXCEPT for the wire to the battery.

As noted in other reviews, the instruction don't provide anything for running the power cable to the battery, which take twice the time as all the rest of the attachments, accomplished in 45 minutes. This is the only reason I didn't give it 5 stars. It would have been much worse if I wasnt able to jack the car up (2014 Mitsubishi Outlander Sport). I looked at the possibility of running under the base boards, but that looked like even more work and I could locate a place under the dash to easily run the wire.

Scritto da: jonathan ml

Works great for my 14’ Lancer

Installed it in a rush before a trip. Took 30 minutes to install, instructions are a bit too generic because my Lancer had the plugs on the right and left side instead of only on the left side. You do not need to remove the taillight assembly on these car, skip this step on a Lancer. Double sided tape was so old it was not sticky anymore. All over I like it because it was easy to install. I decided to wire the battery wire to a cigarette plug instead of trough the engine bay and to the battery directly. Con’s: Sticky tape was bad, wrong instruction for a lancer, routing the batt wire will be a pain trough the firewall.

Scritto da: bob

wireing

very nice working well just the black wire from front of battery to the box a big job taking all the trims off a and passing the firewall but for the rest its ok

Scritto da: Begoodjohnny

Easy install

Easy install, fit perfectly. Working great!

Scritto da: Dalton Russell

Works great, easy install besides running a power wire from the battery

Works flawlessly, the install is simple and easy with the exception of running a power wire from the battery. Would have preferred not to have to run power from the battery but it is what it is.

Scritto da: Daniel Caron

great product

works on my 2015 RVR, easy to connect, everything included :) the only downside, is to run a Power from the battery to the trunk. installation time, approx 45 mins.