CURT 56016 sõidukipoolne kohandatud 4 kontaktiga haagise juhtmestik, sobib valitud Mazda 2 luukpäraga, 5, CX-9, must

Name: CURT 56016 sõidukipoolne kohandatud 4 kontaktiga haagise juhtmestik, sobib valitud Mazda 2 luukpäraga, 5, CX-9, must
Brand: CURT
SKU: 0612314560165
Price: 100.95 EUR
Availability: InStock

Brand:CURT

3.7/5

€
100.95

Kui teie sõidukil pole haagise vedamiseks vajalikku juhtmestikku, on CURT kohandatud juhtmestik ideaalne lahendus. Kohandatud juhtmestik – mida nimetatakse ka T-pistikuks – on lihtne plug-and-play elektriseade, mis ühendatakse teie auto elektrisüsteemiga ja tagab standardse universaalse haagise juhtmestiku. Seda tehakse kahe või enama sõidukispetsiifilise OEM-iga ühilduva pistiku abil, mis ühendatakse tagatulede komplektiga, välistades vajaduse paigaldamise ajal lõikamiseks, liitmiseks ja jootmiseks. Kohandatud juhtmestikud on valmistatud sõidukipõhiselt ja kuigi need pole kõigi sõidukite jaoks saadaval, pakuvad need üht kiireimat, lihtsaimat ja turvalisemat viisi sõiduki pukseerimiseks. Sellel konkreetsel pistikühendusel on neljasuunaline lame pistikupesa ja see on loodud kohandatud juhtmestikuna, mis sobib teatud aastate Mazda 2 luukpära, Mazda 5 ja Mazda CX9 mudelitele (sõidukite ühilduvuse kontrollimiseks vaadake rakenduse teavet). Kaasas on kõik vajalikud juhtmestiku komponendid, et luua usaldusväärne haagise juhtmestiku ühendus, samuti tolmukate, mis hoiab konnektori puhtana, kui seda ei kasutata. Teil on silme ees pilt oma järgmisest sihtkohast – võib-olla on see teie lemmikpüügikohas randuv paat, võib-olla on see kämping, kust avaneb vaade mõnele looduse meistriteosele, või võib-olla on see järgmine suur töökoht. Selle pildi reaalsuseks muutmine nõuab aga enamat kui lihtsalt unistamist. See nõuab tugevat ühendust ja õiget võimsust. CURTi kohandatud juhtmestik on valmistatud tööstuse kõige keerukama tehnoloogiaga ja on loodud hõlpsaks paigaldamiseks, pakkudes teile pikaajalist elektriühendust veokonksu seadistamiseks.

Summa

Lisa ostukorvi Osta kohe

EAN: 0612314560165

Kategooriad Autotooted, Emberkauba tarvikud, Pukseerimistooted ja vintsid, Koormakinnitused Lisatarvikud, Juhmestik,

TOLMUKATE. Pikaajalise kasutuse ja ilmastikukindluse tagamiseks on sellel 4-pooluselisel haagise valgustuse juhtmestikul kummist tolmukate. Kui seda ei kasutata, sobib see hõlpsasti 4-suunalise lamepistiku külge, kaitstes seda välistingimuste eest. USALDUSVÕIME. See 4-suunaline haagise juhtmestik on ehitatud pindpaigaldustehnoloogiaga. Seda tüüpi vooluringid toodavad vähem soojust, optimaalset valgustugevust ja vastupidavat jõudlust. SÕIDUKI SPETSIIFILINE. See järelturu haagise juhtmestik on mõeldud Mazda 2 luukpära, Mazda 5 ja Mazda CX 9 teatud aastate jaoks. STANDARDÜHENDUS. Seda pistikühendusega nelja tasapinnalise haagise juhtmestikku saab kasutada haagise tagatulede, piduritulede ja suunatulede ühendamiseks. 4-suunaline haagise tulede juhtmestik on populaarne paljudel haagistel, lisades teie sõidukile mitmekülgseid pukseerimisvõimalusi. LIHTNE PAIGALDADA. Ei mingit lõikamist! Ei mingit splaissimist! See haagise juhtmestiku komplekt ühendatakse teie sõiduki olemasoleva tehasejuhtmestikuga ja varustab selle standardse 4-kontaktilise haagise juhtmestiku pistikuga haagise ühendamiseks ja pukseerimiseks.

Brand	CURT
Brand	‎CURT
Country of Origin	‎USA
Customer Reviews	4.7 4.7 out of 5 stars 240 ratings 4.7 out of 5 stars
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	9 x 6 x 3 inches
Item model number	‎56016
Item Weight	1.77 Pounds
Item Weight	‎1.77 pounds
Manufacturer	‎Curt Manufacturing
Manufacturer Part Number	‎56016
Material	Rubber
Model	‎Custom Wiring
OEM Part Number	‎56016
Product Dimensions	‎9 x 6 x 3 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega^*

Teie hinnang

Scritto da: Amazon Customer

Everything you need

The package included everything that we needed to install the equipment.

Scritto da: sam

Worked perfect for our 2015 CX-9

Our 2015 Mazda CX-9 had a Mazda trailer control/harness/module installed that had partially failed (right trailer blinkers no longer worked). I installed this Curt module in its place, and everything works perfectly now, for much cheaper than of we were to purchase a Mazda OEM harness.

Scritto da: GCV

Worth it..

Routing the wire from battery to the back of the vehicle maybe complicated but the rest is a breeze...wish it came with tester so that you don't have to get one..it's a. Awesome buy..

Scritto da: Amazon Customer

Comes with everything to install

I've never done this before and wired my car and about an hour. The instructions it comes with are confusing so I just looked up a U-Haul how to video. This thing comes with everything you need to install zip ties silicone and also actors for the power chords. The only thing you really need is to have a screwdriver and a pair of pliers to crimp the electrical wire but together. My trailer lights all works and I have a 17 foot vehicle and ran this out the hitch with about a foot and a half. The cord is nice and long. Works as expected. The only thing is the sticky pad it comes with two mount the inverter box with is not sticky at all you'll need to have your own double-sided tape if you want to use that way of mounting. I just use a zip-tie on both sides of the converter box to Anchor

Scritto da: Matt

Works great for 2011 CX-9

The connectors on this unit were a perfect match for my 2011 CX-9. The only slicing required was cutting into the 12V supply line for the passenger side accessory outlet, which is a much better option than running a wire all the way to the engine compartment to the battery. Took a while to install this, because of how many panels had to come off. In the CX-9, the side panels are held on by about 10 cargo hooks bolted through it. Remove these with a 10mm socket. Remove the trunk and skid plate along the bottom of the hatch. I installed the unit on the driver side, used a self tapping sheet metal screw for the ground, and ran the battery cable wire to the passenger side 12V outlet. The double sided tape is useless, either buy some 3M outdoor tape or I just tucked it into a spot where it stayed put (there is a small area stuffed with foam, I kind of jammed it partway in so it didn't bounce around.) For the 12V outlet, cut the hot wire and splice in the new cable using one of the supplied butt connectors. Make sure you pull the fuse under the hood to avoid shorting. It is listed as "RR outlet." You will need another butt connector, they give you 2, but you need 3 to use the included fuse. Do not go without the fuse, if the trailer wiring shorts out it could damage your cars electronics. I left the flat trailer connector in the area of the jack, so once I put it all back together, I just open the jack compartment and pull out the cable. This keeps it clean and dry until it is needed. Just run it out to the trailer and close the door on it, it will not damage the wire. I have used this method on 3 cars over the years (all hatchbacks) and have never had a problem.

Scritto da: J. Louie

Worked perfectly for our CX-9, but there were a few issues to note

Installed this on a Mazda CX-9 Sport FWD. The instructions were pretty lacking, but I'd already done my research on how to remove the inside panels to get access to all the necessary connectors. Instead of running the power wire all the way to the battery, power is always running to the rear 12V outlet so I tapped into that instead by soldering the short "fuse" wire in the hot wire going into the 12V. After getting everything connected and routed, I did find that my voltmeter was reporting voltage to the 4-flat leads even without the key on or the engine running (this was the not the case with the factory-installed wiring harness tested for comparison). It must be an extremely low draw, because when tested on a trailer in pitch black, there wasn't any glow from the lights until the car lights were turned on like normal. I just wanted to mention that for other folks to be aware of. Pros: Easy to install. Took about two hours with lots of double-checking and testing. Worked perfectly when hooked up to my trailer. Cons: Instructions were lacking, so I'd watch the install videos on eTrailer beforehand if want to brush up on the process. The leaking voltage caused some unnecessary heartburn as well.

Scritto da: overboostvisuals

Easy to install and provide clean factory-look

Absolutely perfect, super clean plug and play install. Worth it vs splicing into tail light harness. All wires are long enough to make it where they need to be, and on my wife’s 2012 CX-9 I was able to almost entirely hide the power cable by running it along the drivers-side under the car where there are a lot of trays that the wire can be tucked in, and the green cable to reach the passenger side easily hides too. A little extra time and you can make it look like the car came from the factory ready for towing.

Scritto da: Dennis P. Dalton

Fits well.

Easy to connect and works as advertised.

Scritto da: Geo

Great product

I have used these before. This was put in a Mazda 5 van and works perfectly! It was no more difficult or easy to install than any others.

Scritto da: P Remps

Worked perfectly!

Nice easy install. Everything fit perfect. It says to run a power cable under the car to the battery, I tapped into the power on the 12v accessory outlet in the back hatch. Made it even easer. Very happy.

Scritto da: Sarah

Fits 2012 Mazda 5. Easy to install

Easy install on my 2012 Mazda 5 GS. Everything plugs in easily. The hardest part of the install was running the wire to the battery under my carpet. Comes with everything you need to install other then basic tools.

Scritto da: Randy

Great quality. Easy instructions

Works perfectly on my 2008 Mazda CX-9. Great quality. Easy instructions. Video on Youtube is very helpful.