CURT 45408 haagise haakeseadme vastuvõtja adapteri reduktorhülsi komplekt, 3 kuni 2-1/2 või 2 tolli, 2-osaline

Name: CURT 45408 haagise haakeseadme vastuvõtja adapteri reduktorhülsi komplekt, 3 kuni 2-1/2 või 2 tolli, 2-osaline
Brand: CURT
SKU: 0612314454082
Price: 100.14 EUR
Availability: InStock

Brand:CURT

3.7/5

€
100.14

CURT-i reduktorhülsside komplekt sisaldab kahte reduktorhülsi, mis kohandavad 3 vastuvõtjatoru ava nii, et see sobiks 2-1/2 või 2 varrega. Adapterihülsid on hõlpsasti paigaldatavad ja ühilduvad praktiliselt kõigi 3-haakeseadistega. Väiksemat hülsi saab kasutada ka 2-1/2 vastuvõtjatoru avas, kohandades selle 2-varre jaoks. Selle komplekti haagise täismassi ja keele kandevõime on piiratud haakeseadme nimiväärtusega. Selle reduktorhülsi komplekti lõpetuseks on sellel väga vastupidav karbiidmust pulbervärv, mis tagab suurepärase rooste-, laastude- ja UV-kindluse.

Summa

Lisa ostukorvi Osta kohe

EAN: 0612314454082

Kategooriad Autotooted, Emberkauba tarvikud, Pukseerimistooted ja vintsid, Koormakinnitused, Vastuvõtjad,

LIHTNE PAIGALDADA. Selle haakekonksu reduktori varrukakomplekti paigaldamine on kiire ja lihtne. Saate kasutada kõiki kaasasolevaid reduktorhülse vastavalt vajadusele, sisestades need lihtsalt oma haakekonksu vastuvõtjasse (haaketihvt müüakse eraldi). KORROSIOONI KINDEL. See haakekonksu reduktori varrukate komplekt on viimistletud ülimalt vastupidava musta pulbervärviga, mis peab vastu vihmale, mustusele, UV-kahjustustele ja muudele söövitavatele ohtudele. TUGEVUS. See haakeseadise reduktori adapteri komplekt on valmistatud ülitugevast terasest, et tagada eesoleval teel usaldusväärne pukseerimine. Selle haagise brutokaalu ja keelemassi hinnangud on piiratud haagise haakeseadme kandevõimega. STANDARDSOBIVUS. Selle haakekonksu vastuvõtja adapteri komplekti mõõtmed on 3 tolli x 3 tolli, et see sobiks iga tööstusstandardi 3-tollise haagisekonksu vastuvõtjaga. Samuti sobib see tööstusstandarditega 2-1/2-tollise või 2-tollise varrega. MITMEKÜLGNE ADAPTER. Seda haakekonksu adapteri hülsi komplekti saab hõlpsasti sisestada teie haagisekonksu vastuvõtjasse, kui on vaja seda ühest suurusest teise kohandada. See haakeadapter sobib 3-tollise vastuvõtjaga ja 2-1/2-tollise varrega. Sobivustüüp: universaalne sobivus.

Brand	CURT
Brand	‎CURT
Country of Origin	‎China
Customer Reviews	4.7 4.7 out of 5 stars 1,589 ratings 4.7 out of 5 stars
Exterior	‎CARBIDE BLACK POWDER COAT
Finish Type	Powder Coated
Item model number	‎45408
Item Weight	‎6.95 pounds
Manufacturer	‎CURT
Manufacturer Part Number	‎45408
Material	Carbon Steel
Model	‎Reducer Sleeve Set
OEM Part Number	‎45408
Product Dimensions	‎7 x 3 x 3 inches
Vehicle Service Type	Trailer

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega^*

Teie hinnang

Scritto da: John Michael Myers

Stout and solid

I bought them to reinforce the 2 inch mounts for my tractor counterweight. The 700 pound cylinder was bowing the 2 inchers.

Scritto da: Jerry Nagel

Best adapter available for 2, 2.5 or 3”

This slips in the 3 inch converts it to 2 1/2 or 2 inch to fit the old stuff well worth the money

Scritto da: johns1959

Curt Receiver Adapter User Review

I recently bought a new F350 to tow an RV when I retire. The new truck came with a 3" receiver. I have a utility trailer and hitch hardware for a 2" receiver so I did some research and selected the Curt Receiver Adapter in order to continue using my 2" hardware. The new adapter will step my 3" receiver down to a 2.5" shank receiver hitch or a 2" shank receiver hitch. The product arrived quickly and was well packaged. It is well designed and has a lip built into each adapter which serves to align the hole for the hitch pin perfectly (this was a frequent complaint in user reviews of other products). I did notice that there is quite a bit of play in the assembly so I expect that there will be some chucking and noise once I have the utility trailer hooked up and towing. I will post an update after towing with this set-up a few times. Update 8/29/2021: I did use the adapter to tow my utility trailer about 800 miles. My utility trailer uses a 2" ball and a 2" receiver shank so I had all three pieces of the adapter assembly installed. The trailer was loaded with a large offset smoker secured in the front of the box (forward of the axle). I did notice some chucking and noise from the receiver adapter but it was not as bad as I feared. Otherwise the adapter performed flawlessly.

Scritto da: scott

Just as described.

good quality well made.

Scritto da: Amazon Customer

2020-2022 Ford F350

If you own a newer Ford F-350 you need this to transfer sleeve from class 5 to class 3 for the normal rv travel trailer. Product is excellent and allows for quick line up with hitch pin. Use the one supplied from Ford for width.

Scritto da: Steve

F 350 Super Duty Approved

Fit was perfect I needed it to reduce my 3 inch class 5 hitch on my F 350 Super Duty to a 2 inch receiver. Heavy Duty and well worth the money

Scritto da: Eric C Parshall

Perfect for me

Got a new truck with a bigger receiver. This allowed me to use my old hitch. Also comes with smaller adapter if I use a smaller hitch

Scritto da: Sue Wilhelm

Just what we needed

The adapter was exactly what we needed to transition from the truck to the Reese hitch system we already had.

Scritto da: Amazon Customer

fait pour 2 size good

très bien

Scritto da: Mike

Great value

Great receiver reducer for the price, using it on a 17 F350 with a 3 inch hitch. For the price it's hard to beat and it's nice that it gives a couple size options. Only down side I can see is it does move around a bit so if you hate hearing your hitch rattle a bit don't buy this and get a proper 3" hitch.

Scritto da: Howie

Great open box deal

Open box deal. Good as new and half the price. It's a big beefy chunk of steel from a major brand. Not too much can go wrong, so it was worth taking a chance on the open box deal.

Scritto da: Jerry Anderson

Fits perfect on 2020 FORD F350

Tabs on inner sleeve make for perfect alignment of holes for pin.

Scritto da: Fil

Adapter works great.

The hitch adapter works great on the 2017 ford 350 super duty dually. Great tool for quickly switching from massive dually hitch down to a 2in.