CURT 13042 klass 3 haagisekonks, 2-tolline vastuvõtja, sobib Chevrolet Silverado, GMC Sierra, C-seeria valikule

Name: CURT 13042 klass 3 haagisekonks, 2-tolline vastuvõtja, sobib Chevrolet Silverado, GMC Sierra, C-seeria valikule
Brand: CURT
SKU: 0612314530427
Price: 570.19 EUR
Availability: InStock

Brand:CURT

3.6/5

€
570.19

Ükskõik, milline on teie ülesanne – olgu selleks paadi vettelaskmine enne koitu, matkaauto ülespanek enne tormamist või lõpliku koorma viimine prügimäele enne sulgemist –, CURT klassi 3 haakekonksud pakuvad tõsiseks pukseerimiseks vajalikku jõudu. Need muudavad haagise ja Bring It hõlpsaks, pakkudes sõidukispetsiifilist sobivust ja raskust erinevate haagiste käsitsemiseks. Kohandatud klassi 3 haakeseadmed on pikapite ja maasturite jaoks kõige levinum vastuvõtjahaakeseade. Oma kaaluvahemiku tõttu leidub neid ka täissuuruses autodel, krossoveritel ja mahtuniversaalidel. Iga kohandatud 3. klassi haakekonksu pakett on valmistatud sõidukispetsiifiliseks paigaldamiseks. See konkreetne komplekt sobib teatud aastate Chevy Silverado 2500, C1500, C2500, C3500 või C3500HD ja GMC Sierra 2500, C1500, C2500, C3500 või C3500HD mudelitele (sõidukite ühilduvuse kontrollimiseks vaadake rakenduse teavet). Selle kandevõime on 6000 naela. GTW ja 600 naela. TW. See ühildub ka tasapinnaliseks pukseerimiseks mõeldud kaalujaotuskonksuga, mille raskusaste on 10 000 naela. WD ja 1000 naela. WDTW. CURT klassi 3 haakekonksu kasutatakse tavaliselt kommunaalhaagiste, paadihaagiste, matkaautode, mootorsaani- või ATV-vedurite ja muu kinnitamiseks ja vedamiseks (MÄRKUS. Ärge kunagi ületage madalaima hinnanguga pukseerimiskomponenti). Igal 3. klassi haakeseadmel on 2 vastuvõtjatoru ja seda on ohutuse tagamiseks testitud vastavalt standardile SAE J684. Tagamaks, et CURT klassi 3 vastuvõtja haakeseade on tõsiseks haagiseks vedamiseks vajalik, on need konstrueeritud kasutades praktilist lähenemist ning valmistatud vastupidavast, ülitugevast terasest ja täpse keevitusega. Samuti kaitseme oma klassi 3 haakeseadmeid vedela A-kihi ja musta pulbervärviga kooskõvastuva viimistlusega, et tagada suurepärane vastupidavus rooste-, mõranemis- ja UV-kahjustustele.

Ühikuid pole saadaval

EAN: 0612314530427

Kategooriad Autotooted, Emberkauba tarvikud, Pukseerimistooted ja vintsid, Koormakinnitused, Vastuvõtjad,

LIHTNE PAIGALDADA. See haakekonks pakub kohandatud tehasesobivust valitud mudeliaastatele Chevy Silverado 2500, C1500, C2500, C3500 või C3500HD ja GMC Sierra 2500, C1500, C2500, C3500 või C3500HD. ROOSTE, LAPSUD, UV-KINDEL. See veokonks on kaitstud ainulaadse kahekihilise roostekindla vedela A-katte ja ülimalt vastupidava musta pulbervärviga. Need kaks viimistlust on koos kõvendatud, et tagada erakordne vastupidavus rooste-, mõranemis- ja UV-kiirgusele. TÄIELIKULT TESTATUD. Iga CURT klassi 3 haakekonksu konstruktsiooni testitakse meie Detroidi insenerikeskuses reaalsetes sõidukitingimustes. Järelturu haakeseadmeid testitakse SAE J684 standardite järgi, et tagada vedamisel ülim ohutus. MITMEKÜLGNE DISAIN. See 3. klassi haakekonks varustab teie sõiduki standardse 2-tollise x 2-tollise haakeseadmega, mis võimaldab laias valikus pukseerimisvõimalusi. See mahutab pallikinnituse, kaubakanduri, rattahoidiku, veokonksu ja palju muud. KINNITAV TUGEVUS. Selle haagise haakeseade kaalub 6000 naela. haagise täismass, 600 naela. keele kaal, 10 000 naela. kaalujaotusvõime ja 1000 naela. kaalujaotus keele kaal (piiratud madalaima hinnanguga pukseerimiskomponendiga).

Brand	CURT
Brand	‎CURT
Country of Origin	‎USA
Customer Reviews	4.6 4.6 out of 5 stars 164 ratings 4.6 out of 5 stars
Exterior	‎GLOSS BLACK POWDER COAT
Finish Type	GLOSS BLACK POWDER COAT
Is Discontinued By Manufacturer	‎No
Item model number	‎13042
Item Weight	39 Pounds
Item Weight	‎39 pounds
Manufacturer	‎CURT
Manufacturer Part Number	‎13042
Material	Carbon Steel
Model	‎Class 3 Hitch
OEM Part Number	‎13042
Product Dimensions	‎37 x 29 x 8 inches
Vehicle Service Type	Pickup Trucks, Marine-Personal-Craft, ATV, Car, Sport-Utility-Vehicles, Snowmobile, Trailer

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega^*

Teie hinnang

Scritto da: Kevin

NOT a perfect bolt on fit

This was second reciever hitch I ordered for my truck. The first one was almost 2inches too narrow and wouldn't even come close to bolting up to the frame. This one was close but I still had to drill out and widen out the holes about half inch on both sides so it would fit. When they say no drill installation, be prepared to do some drilling. It's a good, quality product and once I finally got it mounted it's good and solid.

Scritto da: Mason

Cool

Hitch and all is great. However, I had an issue from manufacturing.. 1 of the grade 10 nuts had a burr in the threads, lucky I had a nut that would work

Scritto da: Daniel

Absolute Perfect Fit for 1990 Chevy Silverado 2WD with Factory Bumper Hitch

An absolute perfect fit. Comes with hardware. I'm not sure why others complaining about the holes not aligning. I had not had a single issue holes not matching frame on the truck. I had to reuse two factory bolts, the one closer to the bumper but that is perfectly alright. Torqued to specs and good to go. Package was not the best when transported. I got lucky with no damage though.

Scritto da: Amazon Customer

Too narrow for 1991 c1500 frame

This hitch comes very well packaged with a beautiful paint, no chips at all, all around looks sturdy, tough, and good. That speaks great of the hitch. Sits level with bumper, able to fit a full size spare tire and a concealed main body. but tilted a bit downward so on the truck not an over all great look but not bad at all. The problem is this came way too narrow for my 1991 c1500's frame (perfectly straight frame). It seemed like a fairly easy install by myself with bottle jacks but in the end it was a pain since only one pair of bolts would go on (the front ones). The other pair I was barely able to get on pushing one side, to the other, back and forth and hitting it with a mallet. The middle pair was absurdly difficult to put on, I had to use a scissor jack and 2x4s while on the truck to widen it up if not the other 2 pairs wouldnt fit again. Over all a good hitch just not correctly made and not what I expected when purchasing this.

Scritto da: Jerry

Easy to install and looks good

This hitch was the easiest one to install out of the 4 or 5 I've installed. It looks good too.

Scritto da: donnie

It works great

It work great and I like way its work

Scritto da: Dustin Honeycutt

Was pretty simple to put on but took me bout a hour cuz of getting calls while trying to install it.

It's made solid but also for how it's made I had to move my ground for my tow receiver and license plate lights.

Scritto da: Ivan J.

Grinding

Product is excellent as no drilling into the frame rails is required. Install is little hard as on mine holes did not match 100% and I had to use a die grinder to enlarge 2 holes so that it will fit perfectly. So overall good some grinding is required.

Scritto da: Rick Harrison

Bolted right in

Perfect, good finish and clear instructions. It can be done with one person but easier with 2 cause it is a little harder to hold the hitch in place while trying to attach the nut