0
0

Kokku:€ 0.00

Vaata ostukorviKassasse
LoginRegister
0

Kokku:€ 0.00

Vaata ostukorviKassasse
LoginRegister

CURT 45090 klass 3 haagise haakeseadme kuulkinnitus, sobib 2-tollisele vastuvõtjale, 5000 naela, 1-tolline auk, 8-tolline kukkumine, läikiv must pulberkate

Brand:CURT

3.8/5

€
110.45

CURT klass 3 ehk standardveoga kuulkinnitused on klassidest 1 ja 2 kõrgemal. Neil on 2 x 2 vars ja suurem kandevõime raskeveokite haagiste, sealhulgas kommunaalhaagiste, paadihaagiste, matkaautode, ühe hobusega loomahaagised ja enamik vabaajasõidukite haagiseid. Kuna 3. klassi haakekonks on pikapite ja linnamaasturite kõige levinum haagisekonks, on klassi 3 kuulkinnitus selle haagisekonksu ja nende suuremate sõidukite jaoks suurepärane täiendus (MÄRKUS: Ärge kunagi ületage madalaimat kandevõimet). mis tahes pukseerimiskomponendid; st sõiduk, haakekonks, haagis jne). Seda konkreetset 3. klassi kuulkinnitust saab kasutada kukkumisasendis, et tagada kukkumine 8 ja haagise täismass 5000 naela. ja keele kandevõime 500 naela. Seda saab ka ümber pöörata, et saavutada 6 tõusu ja haagise täismass 3500 naela. ja keele kandevõime 350 naela. Selle pikkus on 11-1/2. Klassi 3 kuulkinnitused on CNC-vormitud ja robotkeevitatud, et tagada igas seadmes vankumatu täpsus ja töökindel tugevus. Eemaldame mehaaniliselt katlakivi, et tagada sile pind ja kauakestev viimistlus. See 3. klassi kuulkinnitus on varustatud vastupidava läikiva musta pulbervärviga, mis kaitseb korrosiooni, kriimustuste, UV-kahjustuste ja muu eest, et anda sellele eesolevale teele vastamiseks vajalik paks nahk.

Summa
Lisa ostukorviOsta kohe

EAN: 0612314409006

Kategooriad Autotooted, Emberkauba tarvikud, Pukseerimistooted ja vintsid, Koormakinnitused, Vastuvõtjad,

Tõus: 6 tolli. LIHTNE PAIGALDAMINE. Selle klassi 3 haakekuuli kinnituse oma sõidukile paigaldamiseks sisestage vars lihtsalt oma sõiduki 2-tollise haakekonksu vastuvõtjasse. Ümar vars muudab paigaldamise lihtsaks. Seejärel kinnitage vars haaketihvtiga (müüakse eraldi). KORROSIOONI KINDEL. Pikaajaliseks kasutamiseks on see kuulkonks kaitstud vastupidava musta pulbervärviga, mis on kergesti vastupidav vihma, mustuse, lume, teesoola ja muude söövitavate ohtude kahjustustele. VALMIS PUKSIMA. Selle 2-tollise kuulkinnitusega on haagise külgehaakimine lihtne. Sellel on 1-tolline auk 1-tollise läbimõõduga varrega haagise haakekuuli vastuvõtmiseks (haagise kuul müüakse eraldi). MITMEKÜLGNE KASUTAMINE. Sellel haakekonksu kuulkinnitusel on 2-tolline x 2-tolline vars, mis sobib peaaegu iga tööstusstandardi 2-tollise vastuvõtjaga. Palli kinnitusel on ka 8-tolline langus ja 6-tolline tõus, et soodustada tasapinnalist pukseerimist. KINNITAV TUGEVUS. See kuulkonks on valmistatud ülitugevast terasest ja on ette nähtud pukseerima kuni 5000 naela haagise brutomassiga ja 500 naelase keelemassiga kukkumisasendis (tõusuasend: 3500 naela GTW, 350 naela TW).
Brand CURT
Brand ‎CURT
Country of Origin ‎USA
Customer Reviews 4.8 4.8 out of 5 stars 792 ratings 4.8 out of 5 stars
Exterior ‎Painted
Finish Type Gloss Black Powder Coat
Is Discontinued By Manufacturer ‎No
Item model number ‎45090
Item Weight 10 Pounds
Item Weight ‎10 pounds
Manufacturer ‎Curt Manufacturing
Manufacturer Part Number ‎45090
Material Carbon Steel
Model ‎Class 3 Ball Mount
OEM Part Number ‎45090
Product Dimensions ‎16 x 9 x 3 inches
Vehicle Service Type Pickup Trucks, Marine-Personal-Craft, Sport-Utility-Vehicles, Trailer

3.8

13 Review
5 Star
85
4 Star
11
3 Star
2
2 Star
0
1 Star
1

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega*

Scritto da: Tony T
Quality Hitch
Hitch seems very sturdy,works well on my Yukon
Scritto da: mike
Works great
Works great and the drop was perfect for my trailer
Scritto da: kindleuser
Using for Antenna Mount
Had to shim the hole for antenna bolt but works great. Sturdy with optional anti rattle clamp.
Scritto da: T-Bone
Solid
Solid hitch. Drop was just what I needed for hooking up my 1962 Airstream to a Subaru Accent. The height of the Subaru made the trailer pitch up. The 8" drop was just right. It is a bit longer than my old straight hitch so I needed to extend the safety chain. Definitely recommend it.
Scritto da: waltbobjr
Worked on My 2005 Sienna
Used on my 2005 Sienna with a Curt receiver. Top inside of my receiver was 10" above ground and I wanted the 6" rise to get up toward 17" total. There are no standards, but my goal was to use Home Depot trailers (and maybe U-Haul 4x8 Box trailer) and when I stopped at store I measured the trailers at about 17-18". Used with Curt 40004 ball and with the Curt 45007 sleeve as there are no indents or tabs on this mount to keep ball from rotating as it is tightened. The Curt 45007 tongue sleeve worked perfect (albeit pricy) and was able to install and remove balls with one wrench. There has been some reviews that expected Curt products to be made in USA. I can confirm that all the Curt products I bought: the 45090 mount, 40002/40004 ball, the 23590 anti-rattle kit, the 45007 sleeve, and the 20001 wrench are made overseas (mostly China). Black powder coat is nice, but is is chipped/scratched/damaged in many places as these mounts are not individually boxed. I fully expect it to start rusting immediately once exposed to elements. On the other hand, I don't leave it attached, but keep it in a hitch tote bag in the trunk. With 2" ball mounted I was just able to squeeze into the Classic Accessories 74877 Hitch Tote, but most definitely pushing the tote over the recommended limit. All that said, I was prepping for a future tow and I haven't confirmed that my choice of 6" rise is correct for the 2005 Sienna application.
Scritto da: HMD
Heavy steel
It is a heavy hitch that does a great job at hitching things.
Scritto da: Michael Haynes
Looks great, Works great
Powdercoated finish looks great. A little damaged in shipping but that’s to be expected with something this heavy. Has held up great so far
Scritto da: wook1
Perfect for my Highlander
CURT quality. Rock solid. Heavy (I usually hang my car and boat accessories but this just has to sit on my workbench when not in use. Not a problem). And, most importantly, it is the perfect fit (inverted as a rise) for my 2013 Highlander to connect my boat trailer. Add to that an equally solid hitch pin/cotter pin combo (Curt 21510 available here on Amazon) with rubberized coatings on the ends of each for grip and I'm a happy traveler. Highly recommend. Note: I had to try a couple to find the right rise because simple measurement isn't exact, since the car also sinks when you add the weight to it (and Highlanders have REALLY soft suspensions. Its SUV height/center of gravity on a Camry platform. I'm talking windshield wipers move the car when sitting still soft.) It may seem obvious but if you're a newbie to trailering like I was, be sure to test with your max load on the trailer to see how both car and trailer sit. Hope this helps.
Scritto da: gris
Yep... it' a hitch
Seemed like a decent enough hitch at a decent price. For some reason though there was quite a few notches in one side (lf) of the long steel bar that the ball bolts too. Looked like someone hit it a half dozen time with an ax, cold chisel, or other sharp object. Had to use a file to take the sharp edges off to prevent cutting hands or fingers when handling. So much for the anti-corrosive coating. LOL The hole for the ball was a bit off centre too. Other than those concerns, and the need to get new longer safety chains for my trailer, with the new 8 drop, tows fine and the trailer rides level.
Scritto da: randall fenn
Nice hitch
This product is very well-made and very strong
Scritto da: Random Dad
Fits my Dodge Caravan with slight modification.
The tube on this could be an inch longer. It rubs against my bumper. So I took an angle grinder and removed a small countoured bite out of the triangular reinforcing plate. Now it fits my 2015 Caravan nicely and does not contact the bodywork.
Scritto da: Yvon rocheleau
First class
First class
Scritto da: Guillaume Demers
Five Stars
Great car rear protection :) Haven't actually bought it to trail anything.

Seotud tooted

hot
Jõudlustööriist W1276 haagise haakekonksu joondamise komplekt kokkupandava tugeva magnetposti, kollaste pallide ja LED-tulede LED-haagise haakekonksu joonduskomplektiga
3.5/5

€ 57.76

Jõudlustööriist W1276 haagise haakekonksu joondamise komplekt kokkupandava tugeva magnetposti, kollaste pallide ja LED-tulede LED-haagise haakekonksu joonduskomplektiga
3.5/5

€ 57.76

hot
Camco 48473 Eaz Lift RV kaitseraua
3.7/5

€ 116.44

Camco 48473 Eaz Lift RV kaitseraua
3.7/5

€ 116.44

hot
CURT 21501 haagise tihvt ja klamber, 5/8-tollise läbimõõduga, sobib 2-tollise vastuvõtjaga
3.7/5

€ 26.52

CURT 21501 haagise tihvt ja klamber, 5/8-tollise läbimõõduga, sobib 2-tollise vastuvõtjaga
3.7/5

€ 26.52

hot
MadDog GearThree Way 2-tolline vastuvõtja haakeseade
3.5/5

€ 95.94

MadDog GearThree Way 2-tolline vastuvõtja haakeseade
3.5/5

€ 95.94

hot
CURT 13390 klass 3 haagisekonks, 2-tolline vastuvõtja, katmata põhikorpus, sobib valitud Subaru Legacy, Outback
3.7/5

€ 631.05

CURT 13390 klass 3 haagisekonks, 2-tolline vastuvõtja, katmata põhikorpus, sobib valitud Subaru Legacy, Outback
3.7/5

€ 631.05

hot
Standardne 3-punktiline haakeadapter haagiste ja põllumajandustehnika jaoks koos 1. kategooria tihvtide ja 2 haakekonksu vastuvõtjaga
3.5/5

€ 222.38

Standardne 3-punktiline haakeadapter haagiste ja põllumajandustehnika jaoks koos 1. kategooria tihvtide ja 2 haakekonksu vastuvõtjaga
3.5/5

€ 222.38

hot
CURT 31075 2-tolline eesmine vastuvõtja haakeseade, valige Toyota Tacoma
3.6/5

€ 490.91

CURT 31075 2-tolline eesmine vastuvõtja haakeseade, valige Toyota Tacoma
3.6/5

€ 490.91

hot
CURT 11416 klass 1 haagisekonks, 1-1/4-tolline vastuvõtja, ühildub valitud Honda HR-V-ga, must
3.7/5

€ 319.44

CURT 11416 klass 1 haagisekonks, 1-1/4-tolline vastuvõtja, ühildub valitud Honda HR-V-ga, must
3.7/5

€ 319.44

Avastage meie rahvusvaheline võrgustik

Saadame 28 riiki, üle 200 000 toote. Olge kursis, tellige uudiskiri.

Array

Kokku:€ 0.00

Vaata ostukorviKassasse

Kategooriad

Kõik kategooriad
Menüü Kategooriad Lähedal Käru

Menu