Comstar Copper Lock, kuumusvaba vask- ja messingtorude jootmine loob koheselt püsiva lekkekindla sideme, mis on mõeldud USA kosmoseprogrammi jaoks ja vastab USA sõjaväespetsifikatsioonidele, valmistatud USA-s 2 untsi. 10-800 punane

Name: Comstar Copper Lock, kuumusvaba vask- ja messingtorude jootmine loob koheselt püsiva lekkekindla sideme, mis on mõeldud USA kosmoseprogrammi jaoks ja vastab USA sõjaväespetsifikatsioonidele, valmistatud USA-s 2 untsi. 10-800 punane
Brand: Comstar
SKU: 0024924108000
Price: 54.62 EUR
Availability: InStock

Brand:Comstar

3.2/5

€
54.62

ComStari vaselukk on revolutsiooniline ja keskkonnaohutu meetod torude jootmiseks, mis on loodud USA kosmoseprogrammi jaoks. See ainulaadne toode ühendab koheselt vasest ja messingist torud/liitmikud ilma kuumust või metalljootet kasutamata. Copper Lock sobib suurepäraselt kõigi kollaste metallide, vase, messingist torude, liitmike, kõigi külmutusagensite ja vedelike jaoks. Kandke see lihtsalt konnektori sisse ja/või torule; veenduge, et vedelik on täielikult ümbermõõdu ümber, mahub torusse ja 60 sekundi jooksul saavutab püsiv lekkekindel tihend. Püsiva lekkekindla sideme loomiseks pole vaja kuumust ega jootmist. Copper Lock suudab tihendada kuni 2 tolli (580 mm) vasktorusid. Üks neist 2 untsi kirjeldustest ühendab endiselt koguni 340 3/8-tollist liitmikku. Copper Locki patenteeritud valem võimaldab sellel taluda 10 000 PSI voolu ja 500 PSI rõhku. Samuti talub see temperatuure vahemikus -60 °F kuni +300 °F. See saab hakkama veesüsteemide rõhutestidega 2 minutiga ja kliimaseadmete rõhutestidega 25 minutiga. Copper Locki saab lahti võtta ka temperatuuril 400 °F ja seejärel uuesti rakendada. Copper Lock ületab kõik USA sõjaväe vase sidumise spetsifikatsioonid: Mil-S-46163A tüüp I, klass K, Mil-S-224723E kirjaklassi CVV.

Summa

Lisa ostukorvi Osta kohe

EAN: 0024924108000

Kategooriad Tööriistad ja kodukaubad, Tööstus ja teadus, Hitsa- ja Jootmine, Jootmis- ja kõvajoodisaparaadid, Jootepüstolid ja vedelikud, Solder,

Püsiva lekkekindla sideme loomiseks ei vaja kuumust ega jootmist ja selle saab lahti võtta temperatuuril 400 °F ja seejärel uuesti peale kanda. Vaselukk aitab testida rõhku veesüsteemides 2 minutiga ja kliimaseadmetes 25 minutiga. Suurepärane kõigi kollase metalli, vase, messingist toruliitmikega külmutusagensi jaoks ja ühendab need koheselt. Püsiv lekkekindel side, mille nimirõhk on kuni 500 psi temperatuurivahemikus -60 °F kuni + 300 °F. Keskkonnaohutu meetod kuni 2 tolli (580 mm) torude jootmiseks.

Country of Origin	USA
Is Discontinued By Manufacturer	No
Item model number	10-800
Manufacturer	Comstar
Product Dimensions	5 x 4 x 4 inches; 3.53 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega^*

Teie hinnang

Scritto da: True Kong

Good product

Works realy well. Will buy again.

Scritto da: Michael Leahey

Impressed

Used this to extend a copper pipe in a bathroom reno! Was surprised how easy it makes it to do so.

Scritto da: b.right

Didn't work on ac tubing

Reviews looked great and I really wanted this to work, but sadly it failed on multiple connections on my mini split ac install. Maybe the pressures were to high or the tubing (1/2 and 3/8) ware too small. Nevertheless I had to replace them with flange nut connections. Maybe would have worked better with standsrd 1/2 inch water lines.

Scritto da: Joe

Works half the time!

I followed all the instructions, and cleaned the copper well (just as if soldering) and clean any dust left from the brush (tip from another reviewer). I had about a 50% success rate, the fittings didn’t blow off just had slight leaks. I bought the product for some spotshard to get to with the torch…had to do it the old and more reliable way in the end. ????

Scritto da: wezat

Magic

This thing works as advertised no question asked I told my friends about it forget about welding torch,

Scritto da: molehillrock

Works well and fast

It works just like a product that I have been used for the past 35 + years (locktite) Same Red liquid, same aerobic action, same smell and hopefully works as well. PS: For the people who do not how this type of product works, the product needs air to stay a liquid, if the bottle is full it will set up. You are paying for a given amount not a full bottle. As I always say "If all else fails, try the instructions!"

Scritto da: Eric

Works... Must have patience.

Copper lock delivers with some minor deviation from the instructions Finding this product was heaven sent. I had some work to do in an area where I could not braise. It did take a little time to get it to work correctly without leaking, but I used it on a high pressure gas system with unbelievable success once I got a strategy down. Surprisingly this is an epoxy type product that you can use in place of braising or soldering. In that regard it is pretty strong once cured. The main focus when using this product is that the joint connections must be very clean. Sand down the copper and then clean each joint of with alcohol, the better the clean the better the results. In addition, use a cotton swab to liberly apply to bother the pipe and the connector being mindful to have a good coverage. Lastly, when mating the pieces, be sure to hold the pipe and connecter together for a min until the bond is solid. The instructions say instant, but doing it this way ensures a.leak-free bond. I had a lot of trails with this product but it is an awesome product with a good technique. I would suggest that they rewrite the instructions, but Copper Lock is a winner in my book with the proper technique.

Scritto da: andy

Hvac repairs DYI best friend

This worked very well with my new condenser replacement , this is way easier than using heat equipment and welding, this will bind so strong that you can't break with your arm, the key point is to brush the copper ends well and after job completion with in 20 min do an air suction out of system then add more to the ends and if there is any leak , the suction will cover the leaks, you can heat it up a little to speed up the bond, just hover light heat for a second or 2,

Scritto da: Serge Florant

Un produit indispensable

Pour tous ceux qui ne sont pas capable de souder ou d'installer des tuyaux de cuivre dans des espaces très restreint, ce produit est dispensable.

Scritto da: simon

4 months and holding fast on evaporator install

Replacing an evaporator inside a residential refrigerator