AAA 90036 horisontaalse kolmepoolse kolvi asendussurvepesuri pumba komplekt, 3200 PSI, 2,8 GPM, 3/4 võll, sisaldab riistvara ja sifoonitoru, tööstusliku gaasiga töötavate masinate jaoks, must 9,6 GA12 3200 PSI @ 2,8 GPM

Name: AAA 90036 horisontaalse kolmepoolse kolvi asendussurvepesuri pumba komplekt, 3200 PSI, 2,8 GPM, 3/4 võll, sisaldab riistvara ja sifoonitoru, tööstusliku gaasiga töötavate masinate jaoks, must 9,6 GA12 3200 PSI @ 2,8 GPM
Brand: SIMPSON
SKU: 0879399002069
Price: 507.34 EUR
Availability: InStock

Brand:SIMPSON

3.5/5

€
507.34

Ootusi ületama konstrueeritud 90036 AAA® Professional Triplex Pump on ülitõhus ja minimeerib mootori koormuse, pakkudes samal ajal parimat jõudlust. See lihtsalt paigaldatav pumba asenduskomplekt on mõeldud horisontaalse mootori ja 3/4 läbimõõduga võlliga gaasisurvepesuritele*, nagu näiteks Honda GX200. See pump suudab toota kuni 3200 PSI kiirusel 2,8 GPM. 90036 on konstrueeritud kahe ülisuurte kuullaagritega, et vähendada hõõrdumist ja tagada pikaajaline jõudlus ka kõige raskemates puhastuskeskkondades. 90036-l on roostevabast terasest integreeritud mahalaadija, millel on meie lihtsalt käivitatav süsteem. (*Ühilduvuse tagamiseks kontrollige survepesuri sisse- ja väljalaskeava suunda)

Ühikuid pole saadaval

EAN: 0879399002069

Kategooriad Terrass, muru ja aed, Oblikaseadmed, Vahetusosad ja tarvikud, Pingepesuri osad ja tarvikud, Accessories,

Standardühendused: sellel asenduspumbal on aiavooliku sisselaskeava ja keermestatud M22-ühendusega kõrgsurvevooliku väljalaskeava; Kasutage seda paljude survepesuri voolikutega, sealhulgas Simpson MorFlexi mudelitega 40224, 40225, 40226 ja Santoprene mudeliga 41182. Tea, millal õli vahetada: Vaateklaas ja täiustatud õlitihendi tehnoloogia välistavad vajaduse õlimõõtevarda järele. Õlitaseme ja õli enda nähtavuse abil näete hõlpsalt, kui õlitase on madal või vesi on õli häguseks muutnud. Reguleeritav võimsus: pump sisaldab PowerBoost tehnoloogiat, mis tagab tõhusama puhastuskogemuse düüsi kõrgema rõhu; Seal on ka käsitsi keeratav nupp, mis võimaldab teil võimsust teile sobival ajal vähendada madalamat survet nõudvate ülesannete jaoks. Ühilduvus: SAE standardpoldi muster sobib paljudele horisontaalsete mootoritega gaasisurvepesuritele. Ühilduvuse tagamiseks veenduge, et mootori orientatsioon, PSI, GPM, mootori võlli läbimõõt ja voolu pumba sisse- ja väljalaskeühendus oleks vastavuses. Pikendage oma survepesuri eluiga: säästke raha, vahetades pumba välja, selle asemel, et osta täiesti uus elektriline pesur. See hõlpsasti paigaldatav komplekt sobib suurepäraselt 3200 PSI-ga 2,8 GPM-i vooluga pesurite jaoks, et pesta seinu, kõnniteid, sõidukeid ja palju muud.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	SIMPSON
Brand	‎SIMPSON
Color	Black
Color	‎Black
Country of Origin	‎China
Customer Reviews	4.5 4.5 out of 5 stars 177 ratings 4.5 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Included Components	‎Pump
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Item Dimensions LxWxH	12 x 9 x 4 inches
Item Dimensions LxWxH	‎12 x 9 x 4 inches
Item model number	‎90036
Item Package Quantity	‎1
Item Weight	9 Pounds
Item Weight	‎9 Pounds
Manufacturer	‎simpson
Material	Stainless Steel
Material	‎Stainless Steel
Maximum Flow Rate	2.8 Gallons Per Minute
Maximum Flow Rate	‎2.8 Gallons Per Minute
Measurement System	‎US
Part Number	‎90030
Power Source	Gas Powered
Power Source	‎Gas Powered
Product Dimensions	‎12 x 9 x 4 inches
Size	‎3/4" Shaft
Style	9.6GA12 3200PSI @ 2.8GPM
Style	‎9.6GA12 3200PSI @ 2.8GPM
Thickness	‎N/A Inches
Warranty Description	‎5 year warranty

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega^*

Teie hinnang

Scritto da: AMoran

Easy fix for an amateur!

This was so easy to install on my pressure washer- especially with the short how to video. Save yourself a ton of repair up charges and do it yourself- even a novice, like myself, could handle this. It too me a little longer than the video because my original pump was rusted onto the shaft- but I saved $300 doing it myself vs taking it to my small engine repair guy.

Scritto da: Dani

Correct Application

Arrived as promised

Scritto da: Redbird567

It works

I bought this to replace a AAA Pressure Washer Pump 8.7GA12 that came on my Simpson Aluminum ALH3225 Pressure washer. Install was super easy, four bolts off, four bolts back on. Works fine. I hope Simpson is reading as my original pump was/is still under warrantee and I was approved for a replacement back in October of 2020, it is June of 2021 and it is still not in. No amount of calling customer service helps because , well, it's not there fault or problem. All warrantee is handled by a third party. Remember that the next time you want to buy anything made by Simpson.

Scritto da: R. English

Exact fit and easy peasy

It was nearly six months after I purchased this before I got around to changing it out. My Simpson Power Washer was new and I had used it only one time in fall. I tried to clear out the water in the pump when I was done and put it away, but I did not use the antifreeze kit that is small pressure can and that cost me the pump. The next time I went to use it, the winter cold had frozen remaining water in the pump and that made it totally ineffective and lost all pressure. I was pleased to find this and ordered it. The repair shop wanted close to $250 to examine the unit and I had to drive an hour just to drop it off so this replacement part was a much more desireable option. I didn't know what to expect until I replaced it. It took me less than 10 minutes to put the new pump on. Four bolts and the original slid off the keyed shaft, I then slid the new pump on the shaft with attention to aligning it to the key and tightened up the bolts and done! Totally repaired and very happy with this part and ease of repair.

Scritto da: Paul A. Skinner

OEM Replacement Pump

After lots of research, I bought/installed this pump, which is a perfect OEM replacement for the original AAA pump on my Simpson pressure washer. It bolted up to the engine without any problems. The three-star rating for longevity is based on my research that revealed that this pump is not worth rebuilding. One upgrade: this pump includes an adjustable pressure regulator that was not adjustable on the original.

Scritto da: Uncledavemann

Horrible customer service

I bought this to replace a pump that would not allow water to flow through my pressure washer pump when connected to a water source prior to starting the engine. My old unit was in storage for about a year or so. This pump arrived in bomb proof packaging and I had high hopes that it would suit my needs. It did not, so I called the customer service number included with the pump to figure out what could be the issue. As I told the customer service rep from AAA when she informed me that she had no way of knowing what shape my new pump was in when I received it as I didn’t buy it from them directly, “ this could have been delivered to me by dropping it out of an airplane and it would have been just fine”. Unfortunately, it had the exact same issue as my old unit ; when connected to the hose, prior to starting the pressure washer, no water would flow through the pump. So I called the customer service number included with the replacement pump to find out if there was any possibilities that I was some how doing something wrong. The rep asked me if I had installed the pump already. My reply was that I couldn’t know it was defective unless I installed it. She told me that immediately voided the warranty! ??? I explained that I was only looking for technical info as to why a brand new pump would fail in the same manner as the old seized pump, again thinking the problem would some how be something I was doing in error. The rep refused to offer any suggestions other than to pay out of pocket at one of their service centers as I had voided the warranty by actually installing it myself. Why sell to the public if they can’t do the install? Never found out what the issue was with the new pump as I was able to fix the old one with a few careful taps from a hammer. Thank goodness for amazons generous return policy as this is not a cheap item.

Scritto da: Dave

The pump will fail with out water.

I purchased this to replace the original pump on my Simpson pressure washer which was almost new. The pump works great and is the same as on the original pressure washer. I would caution that the pump works great as long as the water is turned on. The pump is of a very good quality but has plastic valves - if the water stops the pump heats up very quickly and the plastic valves just melt and the pump no longer functions. This was my experience - the water stopped and the valves melted. I purchased the entire pump since just the valve portion was not available.

Scritto da: Francisco Ponce

Súper buena y potente

Facilísimo de instalar y súper buena inversión

Scritto da: Gatorzz

Perfect

Perfect

Scritto da: Gerard l.

Très performant merci

Va surpaire bien