0
0

Kokku:€ 0.00

Vaata ostukorviKassasse
LoginRegister
0

Kokku:€ 0.00

Vaata ostukorviKassasse
LoginRegister

Yost vises F10WW puidutöötleja vise

Brand:Yost Tools

3.6/5

€
174.96

See kapivalmistaja vise on ideaalne tööriist teie kodutöökotta. Tehke kapi puidutöötlemis- või montaažitöid ohutult ja lihtsalt. Sellel vastupidaval kruustangil on vastupidavuse tagamiseks malmist korpus ja mitmekülgsuse tagamiseks tugev terasest peakruvi. Yost Vises on tootnud kõrgekvaliteedilisi kruustangusid ja kruvide tarvikuid alates 1908. aastast. Tarnime oma tooteid nii suurtele edasimüüjatele kui ka üksikutele käsitöölistele üle kogu maailma, alates tööstusliku kvaliteediga kruustangidest, professionaalsetest kruustangidest, töökojas kasutatavatest kruustangidest, kergetest kuni rasketeni. tasulised kruusid, multifunktsionaalsed kruusid, keevituskruvid jne. Meie tooted vastavad või ületavad föderaalse spetsifikatsiooni GGG-V-410A tööstusstandardit, pakkudes tarbijatele kvaliteetseid tooteid, mis kestavad aastaid suurepärase hinnaga.

Summa
Lisa ostukorviOsta kohe

EAN: 0789755001837

Kategooriad Tööriistad ja kodukaubad, Tööstus ja teadus, Elektri- ja käsitööriistad, Töövahendid, Käsitööriistad, Viislid, Pinkide vitsad,

GARANTII: Kaasas 1-aastane piiratud garantii ja 90-päevane tagastus. OHUTUSTEAVE: Kruustangide väärkasutamine võib põhjustada tõsiseid vigastusi silmadele, kätele ja muudele kehaosadele. Kruusid tuleb üles seada ja õigesti kasutada. Enne seadistamist ja kasutamist lugege läbi, mõistke ja järgige kõiki juhendis esitatud juhiseid. YOST VISES'I KVALITEET: iga Yost Visesi tööriist on konstrueeritud nii, et see vastaks kõrgetele kvaliteedi-, tugevus- ja vastupidavusstandarditele. Hindame kvaliteeti kvantiteedi asemel ning valmistame tooteid, mis on ohutud ja hõlpsasti kasutatavad. Pakume eluaegset tehnilist tuge, et tagada meie kvaliteedigarantii. PARIM KASUTUS: kappide valmistamisel, spetsiaalselt 2 puidutüki kinnitamiseks puidu puurimise või saagimise ajal. Saab kasutada puidutöötlemisprojektide kinnitamiseks ja joondamiseks. TEHNILISED ANDMED: Kruvi 10-1/4 laius x 19-1/4 pikkus, kruvi 1-3/16 läbimõõt x 15-1/2 pikkus, 3/4 läbimõõduga juhtvardad. ESIVISI: Yost Vises F10WW 10-tolline puidutöötlemiskruus on ideaalne tööriist teie kodutöökotta. Valmistatud vastupidava kruustanguga, sellel on vastupidavuse tagamiseks malmist korpus ja mitmekülgsuse tagamiseks tugev terasest peakruvi.
Batteries Required? ‎No
Brand Yost Tools
Color Blue
Color ‎Blue
Country of Origin ‎China
Customer Reviews 4.5 4.5 out of 5 stars 470 ratings 4.5 out of 5 stars
Included Components ‎One Vise
Item model number ‎F10WW
Item Package Quantity ‎1
Item Weight 6.36 Kilograms
Item Weight ‎14 pounds
Manufacturer ‎Yost
Material Cast Iron
Material ‎Cast Iron
Measurement System ‎US
Package Dimensions ‎22.83 x 11.97 x 2.99 inches
Part Number ‎F10WW
Power Source ‎Hand Powered
Size ‎10" Front Vise
Style Modern
Style ‎Modern

3.6

11 Review
5 Star
69
4 Star
22
3 Star
6
2 Star
2
1 Star
1

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega*

Scritto da: AnthonyF
Excellent vise! Great value for your money!
I was building a Moravian workbench, but wanted to use a modern face vise instead of a leg vise. I picked this because it was light enough for me to attach to my bench top but still have the portability features of a Moravian bench. I was very pleasantly surprised by how well this vise works, and the value for quality of the parts. All the parts mate and align well. The instructions have some typos (e.g. the page with the instructions for the 10" version refers to the product with the 9" model number), but if you follow the instructions you will get a nicely installed vise with extra allowance that they recommend you have. (I was originally skeptical and added extra allowance, and ended up with double when I first did a dry fit. So the instructions where right on.)
Scritto da: GL
Take your time. Check your measurements. Install takes time.
Solid and great woodworking addition for end of my workbench. After reading reviews I knew I’d need to carefully think through the install, make mods to bench to accommodate the vise, drill holes in correct location. Don’t rush, be patient. Think every step through twice. Took me 1 1/2 - 2 hours to complete install but no regrets. Has added so much versatility to my bench. Wish I’d done this years ago. No handle provided. Used 1” dowel and had to sand to fit. Then bought round knobs from hobby store and bored to fit handle. Not a quick release but spins easily to open /close.
Scritto da: DianeH
Very Good Heavy Duty Vise
I installed this vice two weeks ago. It took some time, but most woodworkers will have the skill to mount it properly. It's much more heavy duty than my previous Rockler vise, who's threads wore out after only about ten years of hobby use, and this ones about half the cost of the Rockler. It comes with instructions that are fair, so I advise to look at some youtube videos and take your time to get it right. In use it's strong, easy to open/close, and it holds wood in place very well. I put about a two degree tilt to the closing surface so that the top engages before the bottom, this really makes it a nice vise.
Scritto da: Daniel J. Herkes Jr.
Nice large vice.
I needed a large vise to hold various objects that I repair. I am not a woodworker, but often repair furniture. This vise can be modified to almost any configuration, so take your time and plan the installation. A couple of notes: 1) The vise can be completely disassembled. There is a spring pin holing the handle in place that must be driven out and back in with 1/8" drift pin. Do not clamp it with pliers! 2) I used soft pine (2x12) for the jaws as to not damage what I will hold in place. The jaws can be easily replaced when worn. For other uses, recommend facing the jaws with maple or oak. 3) The tee handle could be a 1" dowel. I used a chunk of 3/4 water pipe and two reducers. It's a bit loose, but two cable ties keep it in place.
Scritto da: bestatchess
Good Vise for the money
I have installed two of these. Things I used: Good forstner bits with a good extender (tight fitting, doesn't wobble): allows clamping and drilling of both vise jaws at the same time, with backer board to prevent blowout 1" diameter hardwood dowel for the handle maple flagpole finials with 1" hole for the handle end caps .02" thick PETG plastic sheet, approximately 2.5" length by 3.5" circumference rolled up and inserted into the handle hole in the vise to form a bushing, secured by external circular beads of hot glue which form bump stops for the finials. Suggested improvement: A paper template for drilling the holes.
Scritto da: William E. Allcock
Works great; Great vise for the money if you can do without the quick release
90+% of the time I am working with 1" or less stock on edge, so the lack of a quick release was no big deal for me. I am an amateur, part time, wood worker, so for my needs this is great. Mounting it was pretty easy (see pic). I did have some interference problems, but that was because of my (custom) design. I have no idea if this would hold up for day in, day out usage, but if you are a part time woodworker like me and the lack of a quick release wont bother you, I highly recommend this vise.
Scritto da: ROBERT CHOW
ok
ok
Scritto da: Amazon Customer
Big and strong
With a little imagination, install to your liking. A professional vise for a professional carpenter. More than satisfied with this product
Scritto da: Papa B
Works well installed nicely.
I used this as an end vice with my ash bench build works very well, little trouble installing.
Scritto da: timethinker
Solid Vise for the money
Very nice and solid Quality Vise just add your own wood ????
Scritto da: Jean
Facile a installer
Super qualité pour le prix wow c’est parfait

Seotud tooted

hot
IRWIN Tools Record Replacement Peakruvi nr 6 mehaanikakruvi (T6C) jaoks
2.7/5

€ 106.13

IRWIN Tools Record Replacement Peakruvi nr 6 mehaanikakruvi (T6C) jaoks
2.7/5

€ 106.13

hot
Yost kruusid 905-AS 5 raskeveokite terasest pingikruvid, raskeveokite 5
3.7/5

€ 278.15

Yost kruusid 905-AS 5 raskeveokite terasest pingikruvid, raskeveokite 5
3.7/5

€ 278.15

hot
Yost Vises 455 kombineeritud vise
3.8/5

€ 237.33

Yost Vises 455 kombineeritud vise
3.8/5

€ 237.33

hot
Wilton WS5 poepingikruvi, 5 lõua laius, 5 max lõuaava (63301)
3.5/5

€ 351.04

Wilton WS5 poepingikruvi, 5 lõua laius, 5 max lõuaava (63301)
3.5/5

€ 351.04

hot
Wilton A-5 Magnefix alumiiniumist vise-lõuapadjad, 5 lõua laius (14830)
4.1/5

€ 88.61

Wilton A-5 Magnefix alumiiniumist vise-lõuapadjad, 5 lõua laius (14830)
4.1/5

€ 88.61

hot
Wilton SBV-65 Super-Junior pingikruvi, 2-1/2 lõua laius, 2-1/8 lõua avamine (63244)
3/5

€ 180.88

Wilton SBV-65 Super-Junior pingikruvi, 2-1/2 lõua laius, 2-1/8 lõua avamine (63244)
3/5

€ 180.88

hot
WEN-i puurpressimiskruvi, 4-tolline (DPA424) 4-tolline vise
3.6/5

€ 78.93

WEN-i puurpressimiskruvi, 4-tolline (DPA424) 4-tolline vise
3.6/5

€ 78.93

hot
HHIP 3900-0251 täppistööriista kruvikruus, 3 laiust x 1,375 sügavusega lõualuu, 4 lõua ava (1 tk) 3 lõua laiusega
3.6/5

€ 385.95

HHIP 3900-0251 täppistööriista kruvikruus, 3 laiust x 1,375 sügavusega lõualuu, 4 lõua ava (1 tk) 3 lõua laiusega
3.6/5

€ 385.95

Avastage meie rahvusvaheline võrgustik

Saadame 28 riiki, üle 200 000 toote. Olge kursis, tellige uudiskiri.

Array

Kokku:€ 0.00

Vaata ostukorviKassasse

Kategooriad

Kõik kategooriad
Menüü Kategooriad Lähedal Käru

Menu