WORX MAKERX WX991L 3 tk meisterdamisriistade komplekt - pöörlev tööriist + nurklihvija + puidust ja metallist meisterdamismasin MAKERX (3) arvuti meisterdamistööriistade komplekt

Brand:WORX

3.7/5

€
198.95

Disainilt väike, endiselt võimsusest pakatav. Harjadeta mootoriga pöörlev tööriist Worx MAKERX mahub kenasti teie kätte. Muutuva kiiruse regulaator võimaldab teil valida töö jaoks õige koguse mahla (5000–35 000 pööret minutis), nii et erinevate materjalide ja erinevat tüüpi tööde jaoks leiate endale sobiva kiiruse. Ja see on varustatud tavalise tsangiga 1/8". See võib töötada kõigi standardsete tsangide suurustega, nii et see aktsepteerib kõigi suuremate kaubamärkide otsikuid ja tarvikuid. Hankige MAKERX Rotary Tool ja alustage klaasi, puidu ja metalli graveerimist. Harjadeta mootoriga Worx MAKERX nurklihvijal on enam kui piisavalt jõudu õhukeste lehtmaterjalide lõikamiseks ning keerukate kujundite ja kontuuride agressiivseks lõikamiseks. Tänu muudetavale kiiruse reguleerimisele (5000 p/min – 20 000 p/min) on teil paindlikkus täita mitmeid ülesandeid. See ketasveski võtab vastu kõik 1,5-tollised ¼-tollise liblikujulise võlliga rattad ja 2-tollised 3/8-tollise võlliga rattad – isegi teiste kaubamärkide rattad. Worx MAKERX Wood & Metal Crafter on õhukese disainiga, nii et saate seda hoida nagu pliiatsit ja teha palju peenemat tööd. Selle täpse digitaalse temperatuuriregulaatori seadistused on kuni 900 F, mis muudab selle ideaalseks jootmiseks, kohapeal puidust siltide märgistamiseks, nahktoodete kaunistamiseks, puidust karpide märgistamiseks, vanast klaasist või kividest käevõrude valmistamiseks, nahast vööde kohandamiseks, ehete ja metalli valmistamiseks. meisterdamine. Lisaks sobib see suurepäraselt eritöödega, nagu katkiste autojuhtmete parandamine ja ühendamine, trükkplaadi ettevalmistamine või sünteetilise trossi lõikamine ja tihendamine. Selle komplektiga on kaasas mahukas ja vastupidav MAKERX kaubamärgiga hoiukott. Selles komplektis on rohkem kui piisavalt ruumi kõigi tööriistade kandmiseks, lisaks palju taskuid ja kotte lisatarvikute ja -materjalide jaoks. See on valmistatud voodriga, vastupidavast, rebenemis-, rebenemis- ja mustusekindlast 600D nailonist ning lukuga sulguriga, et see kõik oleks turvaline. Lisaks hoiab tarvikute hoiukohver kõik selle komplektiga kaasasolevad tarvikud korras.

Summa

Lisa ostukorvi Osta kohe

EAN: 0845534024036

Kategooriad Tööriistad ja kodukaubad, Elektri- ja käsitööriistad, Elektritööriistad, Pöörlevad tööriistad,

[58 TARVIKUD KAASAS] Kõik otsikud, lõikerattad ja vahetatavad otsikud, mida vajate alustamiseks, lisaks hoiukott ja tarvikute hoiukarp. [HUB + FLEX CORD] Kõik MAKERX platvormi tööriistad saavad toite jaoturist ja selle laetavast 20 V Power Share akust – mõlemad kuuluvad sellesse komplekti. Hub on turul ainus kaasaskantav 20 V toitesüsteem hobi- ja käsitöötööriistade jaoks. [MIKROERGONOOMILINE DISAIN] Kõik MAKERX-i tööriistad on spetsiaalselt loodud olema kompaktsed, nii et neid on mugavam käes hoida pikkade venituste ajal ja neid on lihtsam manööverdada. [KIIRSOOJENEMINE] Peaaegu kohene 30-sekundiline sihtsoojendus. Wood & Metal Crafter põleb sama kuumalt kui täissuuruses triikraud, kuid sellises suuruses, mida on detailitöödeks palju lihtsam kasutada. [TEE KÕIK SAMA AKUGA] Worx Power Share ühildub kõigi Worxi 20v ja 40v tööriistadega, välistingimustes kasutatavate toite- ja elustiilitoodetega. [KOMPAKTSED HARJATA MOOTORID] Nii pöörlevat tööriista kui ka nurklihvijat toidavad harjadeta mootorid, mis töötavad ühe aku laadimisega kauem ja annavad rohkem energiat. [ENGRAVE, GRIND, SAND & BURN] 3 tööriista, mis lisavad teie tööle täiendavat detailsust, isikupärastamist ja professionaalsust.

Batteries	‎1 Lithium Ion batteries required.
Batteries Included?	‎Yes
Batteries Required?	‎Yes
Battery Cell Type	‎Lithium Ion
Brand	WORX
Brand	‎WORX
Color	Black/Orange
Color	‎Black/Orange
Country of Origin	‎China
Customer Reviews	4.6 4.6 out of 5 stars 1,124 ratings 4.6 out of 5 stars
Included Components	‎MAKERX Rotary Tool, Angle Grinder, Wood/Metal Crafting Tool, MAKERX Hub, 20V Battery & Charger, Woodburning & Soldering Tips, Engraving Accessories, Grinding & Cutting Accessories, Accessory Bag & Case, Sanding Accessories, Brush Accessories
Item Dimensions LxWxH	‎6.3 x 6.89 x 10.63 inches
Item model number	‎WX991L
Item Package Quantity	‎1
Item Weight	‎4.59 pounds
Manufacturer	‎Worx
Material	‎Metal
Maximum Rotational Speed	‎24000 RPM
Minimum Speed	‎5000 RPM
Number of Batteries	‎1 Lithium Ion batteries required.
Part Number	‎WX991L
Power Source	Battery Powered
Power Source	‎Battery Powered
Product Dimensions	‎6.3 x 6.89 x 10.63 inches
Size	‎No Size
Special Feature	Portable
Special Feature	‎Portable
Special Features	‎Portable
Style	‎MAKERX
Voltage	20 Volts
Voltage	‎20 Volts

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega^*

Teie hinnang

Scritto da: K. Leach

Pretty good

Things to like 1 the tool portion is very light and nimble 2 it just works well for light duty use 3 it doesn't have to be used near an outlet Things I dislike 1 it takes forever to charge! 2 you cannot plug the tool into the charger to use instead of the battery so when it runs out of charge (fairly quickly when soldering) you have to wait hours for the battery to recharge before getting back to work 3 the cord is pretty thick, so when it gets in the way of maneuvering it is really in the way

Scritto da: Hic Svnt Dracones

Best power tools for various projects I have ever used

I grabbed the Makerx rotary tool and soldering iron pack while looking for a replacement rotary tool, and I am writing this about 6 months after my purchase, as I am well aware of how the initial period after a new purchase of a cool tool can induce a short period of fan-boy syndrome, before acknowledging a host of glaringly obvious issues. However, I am glad to say that I am still using the Makerx system daily. So, the best parts.. First is it is incredibly light and thin, which is a bonus compared to some of the other lower-cost rotary tools that are almost unwieldy. The speed is 100% constant as long as you don't overuse the tool and apply too much torque, which is standard with most rotary tools and helps to prevent rapidly broken fingers and wrists, this is a precision tool and not to be used in place of a large craftsmen or Makita Drill or an actual drill press. The biggest thing I love about this is that it is whisper quiet, and I have used it many times at 3:00 AM in my small studio apartment where a normal conversation can keep the neighbors awake. While some other rotary tools do have similar features, such as the WEN cordless rotary tool, which is powered by a 4.2v Lithium Ion Battery, the Makerx is powered by a 20v battery with the same power as any other power-tool interchangeable battery, giving the Makerx Immensely more power, RPM, and battery life. In terms oif the Soldering Iron, this has become my standard daily use soldering iron. I also have 2 TS80 Smart soldering irons and a dedicated soldering station. Prior to this, the $100+ TS80 was my main soldering iron, but the Makerx has since surpassed it. It heats up just as fast, keeps the heat, and cools off very fast, has built in temp display and control on the iron, and it works. I can go through tips fast, but the original tip is still perfect on this Sure, I can't play pacman on it or program a boost temp for when I solder things with higher heat-loss properties, but that's really not needed. I turn it on and solder.. that is it. Both devices give me the performance and power of a standard power tool, but while being very portable. As far as the negatives, and everything has a negative.. I noticed the Rotary tool had a tendency of catching the built in chuck, especially when I pushed it beyond it's torque capability. I don't know if this is a specific issue with my unit, or all of them. However, as a Maker, I prefer doing my own repairs, and the Makerx makes this incredibly easy. They have no screws. You unscrew the top and bottom rings and the rotary tool separates easily into little easily replaceable modules. It is neat just to take a look at it to see the little details that went into the engineering of this. I believe the spring wasn't as strong as it should have been, but I ended up removing the chuck, as it is just as easy to use a any nearby item as the key, and it completely removes the chance of an issue. Other than that, you can't use this without a battery. So, if you only have one battery, when it dies, you aren't using these until it is recharged, which is fairly quick, but having the ability to use wall power is a large annoyance at times. However... I do realize that building the power and battery charger into the power hub would add significant size, mass, and most likely cost. So like all awesome tools, we have to deal with a few annoyances for improvements. As far as the soldering iron goes, I have no negatives to report, other than I wish they included a hot-knife blade, but yes, I did buy one..... and that just demonstrates how useful this is.

Scritto da: Randall Epperson

Simply wonderful

I had lusted over this product for quite a while. I finally bought it and I am so glad I did. The versatility this brings to my workbench is astounding. The quality of the build is obvious. Love the ability to use multiple tools with one power supply. Small and comfortable to hold. A great product.

Scritto da: Terra

A new favorite portable set

Doing a little welding job on the go and this handy tool was everything! Light, portable, powerful; the grinder, mini sander and blower were great. I busted them out and everyone was impressed by their usefulness and quality. I love the battery/hub setup and the whole kit fits compactly in the bag. Even the mini storage box is a useful quality accessory. I added a blower, it too fits in the bag and works great. Bought the 3-kit on sale, feels like I scored. I need ergonomic lightweight tools. This exceeded my expectations. The textured grip makes it easy to hold without concern of dropping or tense gripping. The cord is not cumbersome, the battery and hub are really portable and easy to connect. The tools themselves are balanced and lightweight. I can use these for most any project i need im sure.

Scritto da: Walsh

Great tool but

This is a great tool for its versatility and accessories, but it can’t really compare to a Dremel. Yes the Dremel is bigger and heavier, but the Dremel also has a lot more torque. For heavier jobs the Worx will stall/stop, so I have to go back to using the Dremel for those jobs.

Scritto da: Andrew

This is slowly becoming my favorite tool!

This is a pretty sweet setup. For anyone wanting a rotary tool you can take places it is perfect. The angle grider works good on small stuff. Will not take place of large objects you need to cut or grind. Haven't used the soldering iron yet so unsure about that. Over all the battery could be a little bit better but for a batter operated rotary tool I don't think there are any that will last longer.

Scritto da: Alan F. Jordano

DECENT TOOLS BUT WITH LIMITATIONS

Product arrived on time and well packaged. All of the tools seem to be solidly built. The mini angle grinder is being used to cut through steel and plastic as one would with a Dremel (Worx version of that is also included in this kit). Thus far the grinder is the only tool that I have used extensively. While the grinder will cut through materials you do have to do so at a slower pace that a corded heavier duty product. If you push it too hard it will stall and then restart once clear of the work. I used it with the supplied cutting wheel to cut through plastic that was about 2 or 3/16th thick tub surround, so it was fairly stout material. The cutting wheel was also fairly think at about 2/16th. The cut was about four feet long. It took about ten minutes to complete the cut, with numerous stops and starts along the way. The two amp hour battery was just enough to get the job done. Using a narrower 1/16 cutting disc might have allowed to tool to cut both easier and faster. While I have not used the other two tools a did a little very light testing on them and both the moto tool (Dremel type tool) and the soldering iron seemed to perform well. Just remember that these are intended to he HOPBBYIST tools, not serious shop use tools.

Scritto da: Marcelo

It's not cordless

It works ok but cordless is something without a cord, so, besides it's not connected to electricity, it's connected to the battery by a cord. It doesn't come with a saw blade which I was expecting it to come with the product, so I was disappointed about that. It's not because there's another tool made for cutting that this tool doesn't have to come with a saw blade.

Scritto da: dan

Excellent product

Everything just worked as advertised and flawlessly. One of the better products I have purchased in a while.

Scritto da: Samuel Wayne Parker

Great handy tool.

Liked no annoying plugin cord. Lots of power and relatively quiet. Out performed my old dremel which overheated and died. Wood carving bits work awesome and wood burner does its job well.

Scritto da: john

Love this kit

Great little kit variable speed tools

Scritto da: Cedric Desjardins

Batterie ????

Très bien exepté que la batterie est de 1.5Ah et non 2Ah et ça prend 10h à charger.

Scritto da: Meccartine

J'adore !!!

Me facilite le travail, j'avais déjà un outils worx, batterie compatible!!! Très satisfaite de mon achat... je vais sûrement ajouter d'autres outils