uxcelli reguleeritav kraanmutrivõtme käepide, 1/4-3/4 (UNC/UNF) / 6-20 mm mahutavus, kraanihõõritsa kruvivõtme tööriist, pikkus 315 mm

Name: uxcelli reguleeritav kraanmutrivõtme käepide, 1/4-3/4 (UNC/UNF) / 6-20 mm mahutavus, kraanihõõritsa kruvivõtme tööriist, pikkus 315 mm
Brand: Uxcell
SKU: 0696727294824
Price: 47.88 EUR
Availability: InStock

Brand:Uxcell

2.9/5

€
47.88

Näpunäited: kraanvõtme kasutamisel peab mõlema käe jõud olema ühtlane. Mutrivõti ja kraan peaksid moodustama 90-kraadise nurga ning kraan ja keermestatud alumine auk on üksteisega risti. Lihtne kasutada: sisekeerme töötlemiseks, parandamiseks ja puhastamiseks töötab mõlema käega kruvivõtme pööramiseks teatud suunas. Omadused: Mutrivõtmel on 1 jäik käepide ja 1 reguleeritav käepide, mis reguleerib lõugasid tööriistade hõlpsaks ja tugevaks kinnitamiseks. Sirge kraanvõti pakub suurepärast hooba ja sobib spetsiaalselt suurema läbimõõduga kraanide jaoks. Kasutusalad: Käsikraanivõtmega saab koputamiseks erinevaid kraane kinnitada. Seda saab kasutada ka puurite, hõõritsate, kruvitõmbeseadmete ja muude väikeste tööriistadega, mida tuleb käsitsi pöörata. Kraanmutrivõti: sobib 1/4-3/4 (UNC/UNF) / 6-20 mm mahutavusega, pakkudes kõvadust ja kulumiskindlust. Selgete servade ja nurkadega saab mutrivõti kraanid kindlalt ja usaldusväärselt kinnitada.

Summa

Lisa ostukorvi Osta kohe

EAN: 0696727294824

Kategooriad Tööriistad ja kodukaubad, Elektri- ja käsitööriistad, Käsitööriistad, Kinnitused, Reguleeritavad mutrivõtmed,

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Uxcell
Brand	‎Uxcell
Color	Black, Silver Tone
Color	‎Black, Silver Tone
Customer Reviews	3.9 3.9 out of 5 stars 128 ratings 3.9 out of 5 stars
Finish	‎Powder Coated
Finish Type	‎Powder Coated
Head Style	‎Fixed Square
Included Components	‎1 x Adjustable Reamer Wrench
Item Dimensions LxWxH	12.2 x 1.57 x 0.79 inches
Item Dimensions LxWxH	‎12.2 x 1.57 x 0.79 inches
Item model number	‎a12051600ux0662
Item Package Quantity	‎1
Item Weight	0.01 Ounces
Item Weight	‎0.01 Ounces
Manufacturer	‎uxcell
Material	Die-casting Body Steel Handle
Material	‎Die-casting Body Steel Handle
Measurement System	‎Inch
Operation Mode	‎Mechanical
Part Number	‎A12051600ux0662
Product Dimensions	‎12.2 x 1.57 x 0.79 inches
Size	‎6mm-20mm

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega^*

Teie hinnang

Scritto da: John Reid

As described

It is a not top quality tool that does the job but remember when buying the jaws open enough to fit a 12mm tap not a half inch opening. If you need a tap handle for occasional jobs and your tap is smaller than 12 mm it will do the job. You get what you pay for and that is not always a bad thing.

Scritto da: John B

It works like it should

It's just a tool, does not need to be chrome plated I guess! It works like it should, just took too long to get here from overseas. I wish the seller would have given details of it's origin, that it was sourced from over seas, then would probably have chosen another supplier. Otherwise, no complaints. Thank you.

Scritto da: Arthur B.

You get what you pay for.

It's okay for the price, but loosens its grip too easily.

Scritto da: Squeaky Mouse

Mine wouldn't fit a 3/8 tap head, good tool other wise. Use for smaller stuff.

This is a decent tap wrench for the price. On the tool it says it will go up to 1/2 inch taps. This is not right( on mine at least), It wouldn't fit a 3/8 tap head.... So yes it is worth buying, just use it for smaller stuff and it is perfect.

Scritto da: Mr. R. Holland

Permanent handle for shut-off valve

The convenient size of this wrench (and good price) convinced me to leave this on the four-sided steel rod attached to my house's water shut-off valve, 16" deep in the ground outside (steel rod is hidden within a hedge). A spray of camouflage paint minimizes visibility of the wrench. Now, there's no need to go searching for the valve handle in an emergency. ; - )

Scritto da: Xial

Nonslip is a misnomer.

I loaded a tap into this unit, and found that the tap just could not be tightened in and held in place very well. Not much is more annoying than being half-way done tapping something, and having the wrench fall off the tap. I surmise the issue is with the tap in use: it's a half inch tap, and this just barely fits in the wrench with a little give.

Scritto da: Shawn D.

Get a handle on this!

This handle will handle your tap while you’re tapping.

Scritto da: John B.

Didn't fit my tap

I know a lot about tools but don't have a great deal of experience using taps and dies. I thought that all taps had a standard size end which fit into the tap handle. Well, I assumed wrong as my 16mm tap wouldn't fit. Wound up up tapping my nut using vise grips in stead of this handle. I can't attest to its durability other than it feels flimsy and not made to last. I was buying it to tap one nut so it was a bit of a throw away anyhow. If you're looking for a durable tool to add to your collection I would look elsewhere but for the once in a blue moon use it guess it would get you through the task. Good luck.