UltraPro Z-Wave nutikas klahvvalgusti koos QuickFiti ja SimpleWire'iga, 3-suunaline, töötab koos Alexaga, Google Assistant, nõutav on ZWave jaotur, repiiter/vahemiku pikendaja, ainult valge laba, 2-pakk, 54890

Brand:UltraPro

3.7/5

100.73

Kogege professionaalset kvaliteeti ja isetegemise lihtsust tänu QuickFit™-i ja SimpleWire™-iga seinasisese nutilülitile UltraPro Z-Wave. Kui see on ühendatud ühilduva jaoturiga, juhib juhtmega nutikas lüliti seina-, lae- ja aktsentvalgustust üksikute käskude ja programmeeritud sätete kaudu. Juhtige ja ajastage juhtmevabalt sise- või välisseadmeid, et teie kodu hõlpsalt hallata. Teie automatiseerimisvõimalused on näiliselt lõputud, kui olete ühendatud Ringi, Winki, SmartThingsi, HomeSeeri, Vera, Nexia ja muude jaoturitega.

Vahemiku pikendaja – seinasisene Z-Wave lüliti kordab teie jaoturilt või muult Z-Wave seadmelt saadavat signaali, et pikendada juhtmevaba leviala kuni 150 jala võrra. Mitme lülitiga ühilduv – nutiseade töötab suurepäraselt iseseisvalt või integreerub sujuvalt mitme lülitiga seadistustesse, kui see on seotud UltraPro, GE, Jasco, Enbrighteni ja Honeywelli ühilduvate lisalülititega. Sama valgusti, ventilaatori või seadmega saab ühendada kuni neli lisalülitit. Vahetatavad labad – lülitil on eemaldatav valge nookuristiilis laba. Saadaval on ka mustad, pruunid, elevandiluu ja heledad mandlid. Lüliti uuendamine – Asendage hõlpsalt kõik tavalised seinasisesed lülitid, mis on varustatud nulljuhtmega, et kaugjuhtimisega SISSE/VÄLJA lülitada ja koostada ajakavasid paljude seadmete jaoks. Hääljuhtimine – nautige Google Assistanti või Amazon Alexa hääljuhtimise mugavust, kui olete ühendatud läbi ühilduva Z-Wave jaoturi. SimpleWire – Automaatselt tuvastavad liini- või koormusklemmid toetavad kiiret paigaldamist, tuvastades liini- ja koormusjuhtmed ning konfigureerides lüliti vastavalt. Kaks maandusporti, mis on nihutatud, et vältida lülitikarbi kinnituskruvisid, toetavad mitme lülitiga seadistustes ahelat. QuickFit – täiustatud komponendid vähendasid eelmiste Z-Wave mudelitega võrreldes korpuse sügavust kuni 20% ja kaotasid vajaduse soojuslappide järele. QuickFiti täiustused on ideaalne nutikas lahendus vanemas stiilis lülituskastide, mitme rühma konfiguratsioonide või muude piiratud ruumiga rakenduste jaoks. Revolutsiooniline patentootel disain – QuickFit ja SimpleWire tehnoloogiad pakuvad murrangulisi koduautomaatika funktsioone. Ainulaadsed edusammud muudavad nutikate juhtseadiste paigaldamise lihtsamaks ja töökindlamaks kui kunagi varem.
Actuator Type ‎Rocker
Batteries Included? ‎No
Batteries Required? ‎No
Brand UltraPro
Brand ‎UltraPro
Certification ‎CULus
Circuit Type ‎3-way
Color ‎White
Connectivity Protocol ‎Z-Wave
Connector Type Clamp
Connector Type ‎Clamp
Contact Material ‎Metal
Contact Type Normally Open
Contact Type ‎Normally Open
Control Method ‎Voice
Controller Type ‎Google Assistant
Country of Origin ‎China
Current Rating 15 Amps
Current Rating ‎15 Amps
Customer Reviews 4.6 4.6 out of 5 stars 456 ratings 4.6 out of 5 stars
Included Components ‎2 Smart Light Switches
International Protection Rating ‎IP54
Item Dimensions LxWxH 1.92 x 2.14 x 4.15 inches
Item Dimensions LxWxH ‎1.92 x 2.14 x 4.15 inches
Item model number ‎54890
Item Package Quantity ‎1
Item Weight ‎9.1 ounces
Lower Temperature Rating ‎32 Degrees Fahrenheit
Manufacturer ‎Jasco Products Company, LLC
Material Plastic, Metal
Material ‎Plastic, Metal
Mounting Type ‎Wall Mount
Number of Items ‎2
Number of Positions ‎1
Operating Voltage 120 Volts
Operating Voltage ‎120 Volts
Operation Mode ON-OFF
Operation Mode ‎ON-OFF
Part Number ‎54890
Product Dimensions ‎1.92 x 2.14 x 4.15 inches
Size ‎2 Pack
Switch Style Rocker
Switch Style ‎Rocker
Terminal Screw
Terminal ‎Screw
Unit Count ‎2.0 Count
Upper Temperature Rating ‎104 Degrees Fahrenheit
Warranty Description ‎5 Year Limited

3.7

11 Review
5 Star
80
4 Star
10
3 Star
4
2 Star
2
1 Star
4

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega*

Scritto da: Justin
Functional and reliable
I have had some sort of Jasco Zwave paddle switch for almost 7 years, around 26 of them now, and only once did 1 die during a lightning storm. I buy this brand over the GE because they are slightly cheaper and made by the same company. (Jasco) This new model is very easy to install, slightly thinner giving you more room in the box and pairs easily to Hubitat. GE sells a matching fan control switch if you need that, I haven’t seen that in this brand yet. Highly recommend, only wish they were cheaper
Scritto da: Christian Perez
It works
Clear & Easy Instructions. Connected to my hub and looks great. Will buy again for my outdoor front light.
Scritto da: Sniperrus
Very easy to install
I have used various home automation switches since 1999. X10, Insteon, Z-wave, etc. Most (especially the dimmers) require pro-rating, oversize boxes, and have wires permanently attached, so you have to do more work inside the box when upgrading. These are drop in ready. Side screws, a traveler wire screw for three way switched arrangements, and half the depth of a typical smart switch. Very easy to install, whether or not you use the three way option.
Scritto da: N&B_W
Basic smart switches, exactly what we needed
These are great switches. The automatic line/load terminals make installation a breeze, and the included neutral jumper wire made connecting the required neutral wire easy. With the extra wires in our already crowded box, it made things a little more difficult to push back into place, but after putting on the wall plate you can't tell anything is off. The switches blend in great with our existing regular switch in the same box. Other than the blue LED, you almost can't tell these switches are any different. The rocker doesn't stay up or down, it's more of an on/off button where you press on the upper part to turn on and the lower part to turn off. We needed to setup two outdoor lights up with SmartThings so we could easily control and automate them. Adding them to SmartThings was very easy, just scan the QR code on the front and push the rocker up or down to activate it. It took a minute to find them and pair, but they were identified as GE switches. The blue LED indicator on the front is lit when the switch is on, and off when the switch is off. This makes it easy to see from a distance if the switch is on or off.
Scritto da: Gary D. Houser
Easy to install
Works well with Home Assistant. Only on/off function supported.
Scritto da: jr
Simple installation and connection
Installed, scanned code and linked right up to Smartthings!
Scritto da: Pamacach
Good product!
I like the quality, miss the front plate, a little pricey.
Scritto da: BonesGB
Works as expected
Works as expected. No problem connecting to my Smartthings hub. Only have this installed for two weeks now so I cannot comment on reliability.
Scritto da: Pkrywiak
Tough to pair with home assistant
These switches are nice quality and I love how they did the electrical connections. Really easy to connect and daisy chain if you gang multiple switches together. I use home assistant with zwave js and zooz stick. The pairing was a real pain, had to include and exclude multiple times before they got setup right, but I’m sure that’s a js software issue. Had the same problem with a lock.
Scritto da: Jordan
Works perfectly in Home Assistant
Each switch took me about 3 minutes to install and set up. My only minor criticism is that the jumper wires that come in the box appear to be aluminium or perhaps tinned rather than pure copper.
Scritto da: JYA
Z wave fonctionne bien
Z wave

Seotud tooted

Avastage meie rahvusvaheline võrgustik

Saadame 28 riiki, üle 200 000 toote. Olge kursis, tellige uudiskiri.

Array