Toolocity SCB0312D 3-1/2-tollised Monster kuiv/märja teemantgraniidi/betooni südamiku puurid/augusaed

Name: Toolocity SCB0312D 3-1/2-tollised Monster kuiv/märja teemantgraniidi/betooni südamiku puurid/augusaed
Brand: Toolocity
SKU: 0618838420251
Price: 122.51 EUR
Availability: InStock

Brand:Toolocity

3.4/5

€
122.51

3-1/2 Monster kuiva/märja teemantgraniidi/betoonisüdamiku puuriterad/augusaed. DRY Diamond Core Bits – Monster Brand on loodud vastama üha enamate puurimisrakenduste nõudmistele otse töökohtadel. Neid kvaliteetseid teemantsüdamiku otsikuid saab kasutada nii kuivalt kui ka märjana graniidist ja betoonist tööpindadel. Nendega saab väga tõhusalt puurida portselanist plaate, kui servade lõhestumine ei valmista suurt muret. Bittide maksimaalne kiirus on 4500 RPM. Nende eluea pikendamiseks on väga soovitatav kasutada vett jahutamiseks.

Summa

Lisa ostukorvi Osta kohe

EAN: 0618838420251

Kategooriad Tööriistad ja kodukaubad, Elektri- ja käsitööriistad, Elektritööriistade osad ja tarvikud, Ehituspuuride osad ja tarvikud, Puuripuurid, Puuriplaadid,

soovitatav kiirus 3000-6000 p/min. kasutada märjana või kuivana. Sõltuvalt materjalidest kestab kümneid auke. 5/8 niit sobib poleer-/lihvimismasinatele. Mõeldud graniidi ja betooni puurimiseks.

Batteries Included?	‎No
Batteries Required?	‎No
Color	‎Silver, Black
Country of Origin	‎China
Customer Reviews	4.4 4.4 out of 5 stars 39 ratings 4.4 out of 5 stars
Is Discontinued By Manufacturer	‎No
Item model number	‎SCB0312D
Item Package Quantity	‎1
Item Weight	‎0.01 ounces
Manufacturer	‎Applied Diamond Tools
Material	‎Sintered Diamond Segments
Number of Handles	‎1
Number Of Pieces	‎1
Part Number	‎SCB0312D
Product Dimensions	‎3.5 x 3.5 x 3.5 inches
Style	‎Compact

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega^*

Teie hinnang

Scritto da: Mike-K

Works well. Just be very careful of your wrist when drilling.

These work just fine through an un-grouted cinder block wall. It does a nice clean job. But be aware that it's easy to break a wrist with one of these things if you're not careful. To start, I sincerely encourage you to use a ROUND core bit adapter (aka 'arbor'), like the Toolocity AD1112. The round shank will permit the drill's chuck to slip if you bind-up. Otherwise, it's your wrist that'll break. If you use a beveled bit-adapter, like the ToolCity 0038, that chuck will NEVER slip (actually, there's so much force applied that the damn arbor will bend like a pretzel) Next, consider buying a concrete arbor with a pilot drill. That's money well spent cause you'll be far less likely to bind-up. If you don't use a arbor with a pilot, you'll have to make a jig out of plywood to hold the core (otherwise it just skips around and you can't start the hole). If you're gonna drill, say, a 3.5" hole into cinder-block, first cut a round hole in a 10"x10" square of plywood using a sawzall bit. Then drill masonry-screw holes in each corner and attach it to the wall. That'll keep the core bit from moving around. When you drill, drill as slowly as your patience permits so if it binds it'll be manageable. Whatever you do... always position your wrist so you can let go WHEN it binds (and believe me, it will bind!).

Scritto da: Van77

Cheap and decent hole saw

Cheap and decent hole saw. Cut red brick like butter

Scritto da: wes

start drilling at an angle and slowly roll up until vertical to surface you are drilling

I used this to drill hole in the house footings to place a fence post close to the house. It worked well in concrete, but more teeth would make it not bounce as much. I used the water hose to keep it cool and keep the dust down. I used bits like this for 20 years in the granite countertop industry.

Scritto da: Aleks K

Works good.

Would be better of it had a guide drill. You will need the recommended accessories for it to attach to your drill. I used it for edging pavers.

Scritto da: rebundy

It cut thru 1 1/2 inch of tile and concrete like butter. Perfect circular opening to accept my Kohler ...

Didn't have to hire a plumber. It cut thru 1 1/2 inch of tile and concrete like butter. Perfect circular opening to accept my Kohler valve. I did make a jig out of 3/8 plywood to keep it from skipping all over the tile shower wall. Used the bit itself to cut a hole in the plywood. It looks like new and I'll keep it to use again or loan to folks

Scritto da: Mary

Concrete Core saw

excellent Concrete Core Saw

Scritto da: larry blanc

worked great. use water to keep it cool

cut 4 3 1/2 holes in granite with no problem at all, worked great. use water to keep it cool, but be ready when it starts to throw granite mud around. also bought a 1 1/2 as well and it worked just as good. Great Tool.

Scritto da: Plum Crazy

Great tool!

Did a fine job of boring through cinder blocks, although lack of a centering bit makes it tricky starting on desired centerlines.