Shepherd Hardware 9908 1-tolline vildist Gard keermestatud varrega mööbli liugused, 1/4-tolline varre läbimõõt, 4 arvu, punakaspruun

Name: Shepherd Hardware 9908 1-tolline vildist Gard keermestatud varrega mööbli liugused, 1/4-tolline varre läbimõõt, 4 arvu, punakaspruun
Brand: Shepherd Hardware
SKU: 6798769881612
Price: 24.99 EUR
Availability: InStock

Brand:Shepherd Hardware

3.4/5

€
24.99

TOOTE KIRJELDUS Shepherd Hardware 1-tollised Feltgard Plus ümmargused vildist keermestatud varrega liugurid (4-arvulised) on mõeldud kasutamiseks ekraanide, kontoriseadmete ja keermestatud pistikupesadega majamööbliga. Aitab tasandada mööblit ebatasasel põrandal. Neil on vildist põhjad, mis vähendavad hõõrdumist ja müra ning takistavad lehtpuu- ja laminaatpõrandate kriimustamist. Need kinnituvad kergesti 1/4-tollise x 20 x 1-tollise keermestatud varrega. Pakkuge kõrgemat põrandakaitset reguleeritava kõrgusega. TOOTJALT Shepherd 1 raskeveokite keermestatud varrega FeltGardi liugurid pakuvad suurepärast põrandakaitset koos reguleeritava kõrgusega.

Summa

Lisa ostukorvi Osta kohe

EAN: 6798769881612

Kategooriad Tööriistad ja kodukaubad, Tarvikud, Mööbli riistvara, Mööblipadjad,

Komplekt sisaldab (4) 1-tollist ümmargust taupe plastikust ja vastupidavat beeži vildist keermestatud alust + (4) plastikust sisekeermega vahetükki – 4 tk. Ei ole ette nähtud kasutamiseks nurga all olevatel toolidel või lauajalgadel, kuid keermestatud disain võimaldab kohandatud nivelleerimist ja kõrguse reguleerimist. Lihtne paigaldada – 11/32-tollise läbimõõduga juhtava puurige 1-tolline puidust jalga, et enne keermestatud aluse kruvimist kindlalt asetada plastpesa. Taupe plastist alus teraskeermega varrega ja vastupidavad beežist vildist alumised kruvid plastist keermestatud pesadesse kohandatud tasandamiseks. Vilt võimaldab diskreetset kriimuvaba liikumist puit-, plaat- ja laminaatpõrandatel, kuid mõned rakendused õigustavad kinnitusviise lisaks traditsioonilistele isekleepuvatele.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Shepherd Hardware
Color	Tan
Color	‎Tan
Country of Origin	‎China
Customer Reviews	4.4 4.4 out of 5 stars 456 ratings 4.4 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Included Components	‎4 Glides
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item model number	‎9908
Item Package Quantity	‎1
Item Weight	‎1.13 ounces
Manufacturer	‎Shepherd Hardware
Material	Felt
Material	‎Felt
Number Of Pieces	‎4
Part Number	‎9908
Product Dimensions	3.63"L x 1"W x 4.56"Th
Product Dimensions	‎1 x 3.63 x 4.56 inches
Shape	Round
Shape	‎Round
Size	‎1 Inch

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega^*

Teie hinnang

Scritto da: Joelle

Came with nylon socket insert

Yes, it came with nylon socket inserts, thanks to the seller for answering my question because there are conflicting answers from users. I ordered it right away as soon as I got the answer. I made a leveling board for doming uv resin, and this worked perpectly to what I needed. The nylon insert is a little loose to the screw but for my purpose of leveling, that is fine. For table, I'm not sure but then I did not test it so its just an opinion. For the price, this is 5 star for me. I don't have the exact drill bit but I have a 3/8" bit that is 1/16th short plus a little hot glue and that worked.

Scritto da: Peter C.

Great product, but wrong pre-drill size called out for inserts

This is a great product, but the instructions call for drilling a 11/32 inch diameter pilot hole for the plastic inserts. 11/32 inch drilled holes are too small for the inserts to fit into. The CORRECT size hole is 23/64 inch diameter (somewhat of an odd size).

Scritto da: KM

So far, so good! (Updated)

Update 5-16-18: It's been a about 4-5 months now, and my chair is losing 2 of the felts. I eat 2 meals a day in that chair, so in once, out once, and that's it - twice a day. I knew they wouldn't last forever, but I was hoping for longer than this. My floor is smooth, 1 foot square tiles, with rounded edges to a 1/4" grout line, that's about 10 yrs old, so well worn in. Nothing really to catch the felts on, so no reason for them to come off so soon, IMHO. These didn't last any longer than the stick on felts, but they cost a lot more, and made me drill huge holes in the legs of my chairs. Not good. Knocking off a star for that. ---------- Original Review: -------------------- So far, so good! Pros: * Easily enough installed. Drill hole, insert plug, screw in base, attach felt pads. * Adjustable screw lengths allows for leveling uneven chairs, just by unscrewing the short leg a bit more. Helpful side benefit! * The screw base has a lip, which the felt pads sit inside, stopping them from sliding off, as happens when you just add the felt to the legs normally. * Feels sturdy. 200+ lb folks have sat in these chairs, & no issues, so far. (Only used them for about 2-3 weeks, so time will tell.) * The included felt pads are nice & thick, so they should last a long time. A light gray color doesn't show dirt so much. They slide over the tiles quite well. Cons: * Drill bit size is a pain to find. Why in the heck they chose to use a drill bit size that is so uncommon is beyond me. I have a TON of drill bit sets, & had to go out to a 30 yr old set to even find that specific drill bit. That is just stupid. * Most of this is plastic, so the "so far" comments are a real concern, over time. * Drill bit required is pretty substantial, so you need to be using fairly thick & sturdy legs, or risk undermining them. * These do not pivot, so there is no room for error, beyond the flexibility of the felt pads. My legs are slightly angled in as they rise, so you have to be sure the drill goes in straight to the floor - not the angle of the legs, so it sits flat when you stand it up. (I put tape on my drill bit, to be sure I didn't go in too deep). Overall, I love this for now, & if it holds up, Yay! I'll have to buy replacement felts over time, but they're pretty thick, & hopefully will not rip out any time soon. Side note - these do raise the height of the chairs a bit, so if you're sitting low, that's a benefit, but if you're already barely clearing the table, this is going to raise you up 1/3-1/2" minimum. Sounds like nothing, but we felt it, when we sat down the first time.

Scritto da: ES

nice chair heighten

Wish this screw was longer. 1 1/2 in long.

Scritto da: johanna

table feet

Easy to install and worked exactly for what it was designed for.

Scritto da: Steve Bannister

Prevents damage to the floor.

Protects your floors. We purchased an antique curio cabinet that originally had small wooden wheel casters installed, these were no longer available. The four legs had the original steel sockets for the casters and removal could damage the wooden legs, something had to take their place. These new furniture glides have threaded mounting shafts slightly smaller than the original caster stems therefore required winding duct tape around the shaft to stabilize the glides within the steel sockets. Worked as well as expected and won't damage the wood floors.

Scritto da: S_Lam

Easy Install, Great Floor Protection!

These are super easy to install. All you need is a drill and the appropriate drill size. It calls for an 11/16" bit (who has one of those?!) So I just used a 5/8" bit and rotated the drill around a bit to widen the opening. All in, super easy! Used them on each of the dining room chairs. Now I don't need to worry about scratching the floor all up.

Scritto da: kto

I love the adjustability.

We made some legs to lift some tools in our home shop, but needed to be able to level them. The tools are not heavy, per se, so drilled hole and added nutserts and they are working quite well.