SharkBite 1/2-tollised lahtiühendamistangid messingist torustiku liitmike ühendamiseks, U711 1/2 tolli.

Name: SharkBite 1/2-tollised lahtiühendamistangid messingist torustiku liitmike ühendamiseks, U711 1/2 tolli.
Brand: SharkBite
SKU: 0697285007116
Price: 38.48 EUR
Availability: InStock

Brand:SharkBite

3.5/5

€
38.48

MADE IN USA: Kõik SharkBite klapid, klambrid, liitmikud ja adapterid on toodetud ja testitud USA-s. PROFI EELISTATUD: SharkBite'i tööriistad ja tarvikud vastavad samadele kõrgetele standarditele nii äri- kui ka elamute sanitaartehniliste rakenduste puhul, ühendades vastupidavuse ja kasutuslihtsuse, mis sobivad kaubanduslikuks remondiks või koduparandusprojektideks. VASTUPIDAV JA KÕRGE KVALITEET: liitmiku eemaldaja on valmistatud vastupidavast roostevabast terasest ja laiade käepidemetega, mille nimi on teile tuttav ja usaldusväärne; SharkBite'i kvaliteet ja jõudlus on kohapeal tõestatud ja torustikutööstuses usaldusväärsed. VASK, PEX, CPVC, CTS, HDPE: SharkBite'i lahtiühendamistangid ühilduvad vasktorude, CTS-, CPVC-, HDPE- ja PEX-liitmikega ning ühendavad kõik kolm tüüpi mis tahes kombinatsioonis, mis on ideaalne kitsastes tööruumides töötamiseks. HAIDIIDI EEMALDAMISE TÖÖRIISTA: 1/2-tollised lahtiühendamistangid võimaldavad messingist tõukurliitmikud kiiresti ja lihtsalt toru küljest lahti ühendada; saab eemaldada või reguleerida tõuget liitmike ühendamiseks kitsastes kohtades, et neid oleks lihtne lahti võtta.

Summa

Lisa ostukorvi Osta kohe

EAN: 0697285007116

Kategooriad Tööriistad ja kodukaubad, Korraline veevarustus, Torud, toruliitmikud ja tarvikud, Toruliitmikud,

Batteries Included?	‎No
Batteries Required?	‎No
Brand	SharkBite
Brand	‎SharkBite
Color	Purple
Color	‎Purple
Customer Reviews	4.5 4.5 out of 5 stars 2,270 ratings 4.5 out of 5 stars
Finish	‎Stainless Steel
Grip Type	‎Ergonomic
Handle Material	Stainless Steel
Handle Material	‎Stainless Steel
Included Components	‎Disconnect Tongs
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	2 x 2 x 2 inches
Item Dimensions LxWxH	‎2 x 2 x 2 inches
Item model number	‎U711
Item Package Quantity	‎1
Item Weight	0.05 Pounds
Item Weight	‎0.05 Pounds
Item Weight	‎0.8 ounces
Manufacturer	‎Cash Acme
Material	‎stainless_steel
Measurement System	‎inch
Part Number	‎U711A
Product Dimensions	‎2 x 2 x 2 inches
Size	‎1/2 in.
Style	‎1/2 Inch
Usage	‎Removal of SharkBite brass push-to-connect fitting from pipe.
Warranty Description	‎2 year manufacturer

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega^*

Teie hinnang

Scritto da: D.R. Wolfe

Works well

Does the job.

Scritto da: Ethan Miller

READ THIS TO SAVE MONEY

Okay so basically you want to know 2 things 1 does it work and 2 is it worth the money. The answer is yes and yes. Now for the people who want more details. There are a couple ways to deal with shark bits one is to use an adjustable wrench like the ones with the dial in the middle and you can adjust from side to side. This is if you dont have the actual shark bite little c clip remove. but i can tell you from doing plumbing for years those can be a pain and you dont want to be tugging and pulling on pipes connected with shark bites too much. Last thing you need is to turn 1 job into 2. The issue with this tool for most people is that you need to use your brain and adjust it so that one side is over the back hum of the shark bite and the other side press the compression coupling. There is another review about bolting a screw to make it permanently adjusted. That is non sense why do all that extra work when the tool is fine as is. That is like trying to reinvent the wheel. Any tool I need to spend another 30 minutes in the shop adjusting is not worth buying. This pulls it off quick and easy with less need for hulk strength. Just also keep in mind in my personal opinion its not good to be removing and reinstalling the same shark bit too many times. Each time you remove the shark bite it leaving grooves on the pipe i feel puts more wear and tear on the pipes and can cause leak in the future. So its a great diy product that makes things fast and simple but when you can i would recommend solding the pipes. But which plumber doesn't keep a couple shark bites handy now a days. Also always make sure you fully seat the shark bite fitting when putting it on not pushing it down all the way can cause leaks. also clean the pipe with a rag or paper towel to remove any debris. If the pipe has old lump of solder or anything that can prevent a smooth connection i would use another fitting. Anyhow back to the product now it feels strong and durable can be dropped or tosses in tool bag without worry. Finally its pretty cheap cost compared to time you waste trying the diy removal process or using that sharkbit c orange thing a ma gig they give you.

Scritto da: Glen D

You better have good hand strength

It works and makes Sharkbite removal easy but you will certainly need strong grip

Scritto da: K. Rutkowski

It works but takes some muscle.

At first I thought they sent the wrong size but then looking closer at it, one side is larger than the other which is correct. It does work, but you need a fair amount of hand strength and pull with other hand on the pipe at the same time.

Scritto da: Bigguy

When u can't get a wrench in

Nice and small to be able to get behind it if stub outs short and the stops right at the edge of wall

Scritto da: WinpakBob

Shark Tamer

Does what it supposed to do, remove the SharkBite from the pipe. It is a bit difficult to use and by the time you get good at it, you are done. I have removed these in the past with the adjustable wrench method and this tool will make it easier and more controlled. Worth the money, but doesn't work without developing a bit of a skill!

Scritto da: Amazon Customer

Better than the orrange disconnect clips, but still not optimal.

Better than the orrange disconnect clips, but still not optimal.

Scritto da: Guesswhoism9742

Freat value

When working with PEX quick connectors these are just what the Doctor ordered...

Scritto da: Vic Cavalli

Extremely handy

I love the SharkBite connectors but I always needed a third hand to disconnect them. I used my new Disconnect Tongs for the first time yesterday and was shocked by how well they worked. Couldn't be happier with this product. Well made and extremely handy.

Scritto da: Amazon Customer

Not enough hand pressure can be applied

Good product but takes too much strength in your hand to make the shark bite release from the 1/2 in pipe needs more tension in the hand grip

Scritto da: Amazon Customer

Better than expected.

Easier to use than the little circular separators. Good for tight spaces.

Scritto da: Robert

Does not work for me.

I have lots of Shatkbite brand pipe, fittings and cutting and deburring tools. Have zero of any other brand. Been using Sharkbite quick connect fittings for over a decade at our cottage on both copper and PEX, when I have small jobs. I have been a copper guy for 50 years and am good a sweating plumbing joints, but I now have a mixture of copper, PEX, barbed and quick fittings, and Sharkbite quick connect fittings work with almost anything. It is surprising that I find this tool all but unusable. I have returned to the little flat plastic release tool. Maybe I am doing something wrong. Others seem to.like it.

Scritto da: Old guy

Build pretty good and way more effective than the plastic things

This tool is worth the money. You can apply way more force to sharkbite fittings than with those "plastic thingies" Its actually built a lot better than expected and not just a "throw away tool" for onevtime use