ScotchBlue originaalvärvimislint, 2,83 tolli x 60 jardi, 2090, 1 rull

Brand:Scotch Painter's Tape

3.8/5

44.32

ScotchBlue Original Multi-Surface Painter's Tape pakub mitmekülgset lahendust teie pindade kaitsmiseks, et saaksite oma loomingulised visioonid ellu äratada. See kleeplint, mis on mõeldud siledate või kerge tekstuuriga seinte, viimistluse, põrandaliistude, plaatide ja klaasi jaoks, püsib peal kuni 14 päeva ja eemaldatakse kergesti ilma kleepuvat jääki jätmata. UV-kiirgusele, päikesevalgusele ja niiskusele vastupidav ScotchBlue Painters Tape on ideaalne sise- ja välisteip, mis võimaldab teil vallutada vau väärt värvimisprojekte mitmel pinnal. See lahustivaba teip on valmistatud 45% taastuvatest ressurssidest ja südamik on valmistatud 70% tarbimisjärgsetest jäätmetest. See lahustivaba teip on valmistatud energiahalduse jaoks sertifitseeritud nullprügilas, et pakkuda teile säästvat värvimistoodet. Kasutamiseks kandke maalriteip kindlalt pinnale ja laske enne värvimist 30-60 minutit seista. Enne eemaldamist oodake, kuni värv kuivab. Parimad värvitööd algavad Scotch Painters Tape'iga. Täieliku liimilahenduste valikuga pakub ScotchBlue Painter’s Tape kindlustunnet suurepäraste tulemuste osas, et töö saaks esimesel korral õigesti ja tõhusalt tehtud.

Ühikuid pole saadaval
KASUTAMINE: Laske kindlalt kinnitatud teibil enne värvimise alustamist 30–60 minutit tarduda ja kui värv on katsudes kuiv, tõstke teip aeglaselt üles, et eemaldada 45-kraadise nurga all. JÄTKUSUUTLIKKUS: 45% taastuvatest ressurssidest valmistatud lahustivaba värviteip, mille südamik on valmistatud 70% tarbimisjärgsetest jäätmetest. TACKLE SISSE- JA VÄLJAS: talub UV-kiirgust, päikesevalgust ja niiskust, nii et saate seda kasutada sise- või välisteibina. VALUTA ENAMIK PINDAD: Spetsiaalselt disainitud sinine teip siledate või kerge tekstuuriga seinte, viimistluse, põrandaliistude, plaatide ja klaasi jaoks. KAHJUSTUSVABA MAALRITEIP: Kleeplint püsib pindadel kuni 14 päeva ja see eemaldatakse kergesti, jätmata maha kleepuvaid jääke. VALMIS. SET. PAINT!: 1 rull 2,83 tolli laiust ScotchBlue Original Painter's Tape, mitme pinnaga lahendus teie elu- või töökeskkonna värvimise ettevalmistamiseks.
Brand Scotch Painter's Tape
Color Blue
Country of Origin USA
Department Unisex-Adult
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer No
Item model number 2090-72A
Manufacturer 3M
Material Blend
Number of Items 1
Product Dimensions 2.83 x 4.69 x 4.69 inches; 1 Pounds
Special Feature No Residue

3.8

8 Review
5 Star
83
4 Star
11
3 Star
4
2 Star
1
1 Star
1

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega*

Scritto da: Jon
Not Mr Handy ... But this got the best of "ME CLUMSEY"
It was really hard "for me and don't know what I did awong" just getting the roll to start from packaging. Like how wide it is
Scritto da: Shay Chicci
3D Printer Awesome
I use it on my 3D print bed to make removal of prints easier. Prints perfectly on top of tape, removal is a bit easier ( still not perfect ) but tape comes off bed clean.
Scritto da: Javid Akhundov
One of the best
The product arrived without any physical damage or cosmetic imperfection. The usage of this tape was mostly for modifying the sound signature of a mechanical keyboard. Overall, it is good, does the job and does not leave any adhesive on keyboard's PCB. After a while, I used in to sort of stitch the teared parts of a pleather office chair. To my surprise, not only does it hold the pleather together, but it also does not get peeled off so easily. For three months straight, it still stays on the chair and looks, as if it was applied yesterday. The only things, which started to peel off, are tiny sharp corners, but the tape does not continue to peel off from them. Before I purchased this tape, I used other types of cheap masking tapes for all sorts of work. They always failed me in holding stuff, staying in place for a long period, and they always left adhesive one way or another. I will probably start looking into other products from 3M Company from now on.
Scritto da: Justin
Ole George sucks with tape!
Doing some painting and getting those crisp lines and protecting areas from drips. Good tape had no issues using it, but had some paint come off in areas. Could just be the paint or previous painters work. But as it was a DIY, and I'm not a professional, I couldn't tell you. Either way, it worked for what I needed and good quality.
Scritto da: Rolidnot
Best painters tape on the market
I use this "blue tape" all the time for all sorts of projects. Most recently, I used this tape on a set of "cat steps" I milled from 12/4 white pine, topped with low pile carpet, installed as "floating shelves" on the wall and painted black - on a white wall. I taped the wall off, used Sherwin Williams satin black stock paint and painted 6 steps for my furry buddies to climb on on my front room. I let the black paint dry, pulled it off and the paint job was perfect and walls were all still white. I didn't remove the wall paint underneath the tape, I didn't get any black paint on the wall and the tape went on and came off with ease. I've tried generic versions of this tape and they pretty much fail one way or another so I stick with the Scotch brand (pun intended). Hope that helps!
Scritto da: David
works well
Did not realize there was that much difference in quality among brands of masking tape. This one is fine. Other off-brands I have recently used have easily torn when trying to remove a strip of tape from the roll. Some others have been fine and also worked well, but this is the standard quality that others are measured by. And they came so quickly.
Scritto da: E. Story
Great for crafting
I love this tape! It stays where it's supposed to, and then it peels off without leaving any sticky residue, like the cream-colored masking tape I was using before this.
Scritto da: MLB
Best choice for 3D printing!
ScotchBlue Painter's Tape, Multi-Use, 2.83-Inch by 60-Yard is a must for any 3D printing enthusiast. Anyone who is familiar with 3D printing knows that trouble with prints sticking to the bed is the number one problem with 3D printing. There’s nothing more frustrating that watching your printer chug along for a few hours when, all of a sudden….pop! Your print releases from the bed and starts dragging across the bed. This wastes time as well as filament. So frustrating! The number one remedy for this issue is painter’s tape! I’ve tried no-name brands and they’re not as good as Scotch. The wide, almost three inch width of this tape allows me to cover the entire bed of my Printrbot Simple Metal with only 2 rows of tape. When I first tried painter’s tape, I chose the standard with – maybe an inch or so wide. What a pain that was to apply! Layers overlapped, making my bed uneven. Without a doubt, the wide tape is the way to go!

Seotud tooted

Avastage meie rahvusvaheline võrgustik

Saadame 28 riiki, üle 200 000 toote. Olge kursis, tellige uudiskiri.

Array