0
0

Kokku:€ 0.00

Vaata ostukorviKassasse
LoginRegister
0

Kokku:€ 0.00

Vaata ostukorviKassasse
LoginRegister

Pro'sKit 902-276 Crimper - CrimPro koos süüteküünlaga

Brand:Pro'sKit

3.5/5

€
91.75

Pro’sKit® koosneb "Pro"+"s"+"komplektist", need sõnad on professionaalide tööriistakomplektidest tähendusrikkalt ühendatud. Selle kaubamärgi nimel soovib Prokit olla professionaalne tööriistakomplektide tootja, kes arendab professionaalseid tööriistu, et muuta inimeste töö tõhusaks ja hästi tehtud. "Innovatsioon, kvaliteet, teenindus" on Prokiti ettevõtte poliitika ja Pro’sKit® kaubamärgi pidev nõudmine. Töötame "innovatsiooniga" - arendame professionaalseid tööriistu, "kvaliteet" - vastame rahvusvahelisele ohutusstandardile, "teenindus" - keskendume kasutajasõbralikule disainile, et pakkuda turunõudluse rahuldamiseks terviklikke tööriistalahendusi. Pro’sKit® ei ole ainult tööriistabränd; see on teie suurepärane abimees ja sõber, keda võite usaldada.

Summa
Lisa ostukorviOsta kohe

EAN: 0617293014906

Kategooriad Tööriistad ja kodukaubad, Elektri- ja käsitööriistad, Käsitööriistad, Juhttõmburid,

Surub süüteküünla juhtmed iga kord ideaalselt kokku. Täida või ületada kvaliteedistandardeid ja kvaliteedikontrolli protseduurid vastavad standardi rangetele nõuetele. Professionaalsed tööriistad. Brändinimi, mida võite usaldada.
Brand Pro'sKit
Color Multi
Country of Origin Taiwan
Grip Type Ergonomic
Is Discontinued By Manufacturer No
Item model number 902-276
Manufacturer Pro'sKit
Package Dimensions 12.91 x 5.12 x 1.18 inches; 1.4 Pounds

3.5

13 Review
5 Star
64
4 Star
23
3 Star
8
2 Star
0
1 Star
5

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega*

Scritto da: Stephen Metzger
Oh my goodness this is a good item. I built a custom set of ignition ...
Oh my goodness this is a good item. I built a custom set of ignition wires for an aircraft engine using this, MSD 34039 red wire and MSD 8850 plug boots. Took an entire evening and I had to clip a couple of ends while learning. Sacrifice a couple of ends and cut them apart after crimping to make sure you're doing it right. After some practice the results were stunningly professional. I removed the old aircraft-grade ignition wires from the plane and the ones made with this crimper and the listed parts were WAY better constructed, crimped and more rugged than what came out. Save hundreds of dollars overall.
Scritto da: James & Lady D
Works great for a good price
Had to build a custom set of wires for a race motor and finally decided to get a good set of pliers to do the job. These are an economical and quality built set that did a great job and I have used them on various wire repairs since then. They seem like they will last a long time and that means a lot to me as I earn a living with my tools.
Scritto da: BadMonk
Crimps Look Like They Came From A Factory
This is my second pair of Pro'sKit crimpers. They do their job real well. The grips are very comfortable on the hands. The crimps always turn out looking professional, as long as I do my part. The ratcheting action makes crimping easier than a plier type crimper...or rather crusher. Pro'sKit crimpers are the way to go, especially if you do a lot of this kind of work. Forget the cheapies and make good, secure crimps with the right tool.
Scritto da: Tom Muldoon
Great value, great product
Very easy to use. Fits my hands nicely. Very high quality product.
Scritto da: El Torro 5150
WORTH THE BUY!
So glad I bought this. I have tried to crimp spark plug wires in the past using cheap (junk) crimpers. These are worth every penny and I'll put them up against the name brand high dollar ones. The best part about these is you can buy different jaws to crimp different things. I ordered a set to do RJ45 ends.
Scritto da: David R.
Great tool
I needed custom length spark plug wires and this tool fit the bill for crimping the ends. Worked like a charm.
Scritto da: flyeri
Great tool
This tool wroks great. I had a couple of extra connectors and practiced crimping twice before I started working on my plug wires. By the time I had done 4-5 of them it only took a min to make up each wire and created a professional installation. Well worth the money even if you only use it a couple of times.
Scritto da: Dennis L. Odoms
Works well
I have always had a problem attaching terminals to the spark plug end of plug wires. This thing does a perfect job. It's kind of expensive, but I've found that pricey quality crimpers are a necessity for all but the most casual of automobile enthusiasts.
Scritto da: Eric Harnett
Works good, got rusty fast.
Works good, cut and crimped all eight wires with no issues for my old V8, but after a few months in my tool box it got fairly rusty and it has never seen moisture...
Scritto da: Outlaw irv
awesome
very easy to use
Scritto da: boyder
Nice set of crimpers
Used for crimping spark plug wires. Did the job nicely.
Scritto da: Scott in CA
Recommended
A very good crimper at a reasonable price. Recommended.
Scritto da: gary smith
i like it.
solid easy to use. the only crimpper that works good for large mm wires.

Seotud tooted

hot
EZRED B7946 3-punktiline minijuhtme- ja kaablikruvi
3.7/5

€ 111.03

EZRED B7946 3-punktiline minijuhtme- ja kaablikruvi
3.7/5

€ 111.03

hot
Pro'sKit 300-167 Lunar Series Crimper FC/SC/ST/LC/SMA ja MT-RJ jaoks, kiudoptilised pistikud, mitu, üks suurus
3.5/5

€ 80.97

Pro'sKit 300-167 Lunar Series Crimper FC/SC/ST/LC/SMA ja MT-RJ jaoks, kiudoptilised pistikud, mitu, üks suurus
3.5/5

€ 80.97

hot
Pro'sKit 300-024 Crimper, põrkega, koaksiaalne, RG-174, mitmevärviline
2.1/5

€ 85.69

Pro'sKit 300-024 Crimper, põrkega, koaksiaalne, RG-174, mitmevärviline
2.1/5

€ 85.69

hot
Wheaton 224323 alumiiniumist seerumiviimistlusega klappkorgiga tihendikruvi, 20 mm, 20 mm tihendite kinnitamiseks pudelitele ja viaalidele
4.1/5

€ 680.83

Wheaton 224323 alumiiniumist seerumiviimistlusega klappkorgiga tihendikruvi, 20 mm, 20 mm tihendite kinnitamiseks pudelitele ja viaalidele
4.1/5

€ 680.83

hot
Wiha 32945 7-tollised isoleeritud tööstuslikud presstangid
3.6/5

€ 73.39

Wiha 32945 7-tollised isoleeritud tööstuslikud presstangid
3.6/5

€ 73.39

hot
Jonard Tools CTF-360 tihendustööriist 360° lühikeste ja pikkade F-tüüpi pistikute jaoks 360° tihendus F-tüüpi
3.7/5

€ 95.49

Jonard Tools CTF-360 tihendustööriist 360° lühikeste ja pikkade F-tüüpi pistikute jaoks 360° tihendus F-tüüpi
3.7/5

€ 95.49

hot
Jonard Tools TCC-1416 elektriline ots ja klemmrihma eemaldaja ja krimpsutaja
4.1/5

€ 48.64

Jonard Tools TCC-1416 elektriline ots ja klemmrihma eemaldaja ja krimpsutaja
4.1/5

€ 48.64

hot
SharkBite 1/2 tolli kuni 3/4 tolli PEX pressimistööriist, kahepealine oranžide käepidemetega, 23251
3.7/5

€ 126.56

SharkBite 1/2 tolli kuni 3/4 tolli PEX pressimistööriist, kahepealine oranžide käepidemetega, 23251
3.7/5

€ 126.56

Avastage meie rahvusvaheline võrgustik

Saadame 28 riiki, üle 200 000 toote. Olge kursis, tellige uudiskiri.

Array

Kokku:€ 0.00

Vaata ostukorviKassasse

Kategooriad

Kõik kategooriad
Menüü Kategooriad Lähedal Käru

Menu