Power Pro 47872 mahajäänud kruvid, 1/4 x 1-1/2, Star Drive Construction Lag kruvid, roostekindel, keraamilise kattega pronks, 5 naela vann, 375 tk 375 tükki

Name: Power Pro 47872 mahajäänud kruvid, 1/4 x 1-1/2, Star Drive Construction Lag kruvid, roostekindel, keraamilise kattega pronks, 5 naela vann, 375 tk 375 tükki
Brand: Power Pro
SKU: 0008236695076
Price: 96.14 EUR
Availability: InStock

Brand:Power Pro

3.7/5

€
96.14

TOOTE KIRJELDUS Construction Lag Screws sobivad suurepäraselt teie järgmise väliprojekti jaoks. Levinud rakenduste hulka kuuluvad tekid, trepid ja mängukomplektid. Nendel toodetel on nii muljetavaldavad kui ka ainulaadsed omadused. Edetabeli tipus on uus Star Drive'i tehnoloogia, mis praktiliselt välistab väljalülitamise ja tagab sujuva ja pingutuseta sõidu iga kord. Puidu lõhkumise võimalusi vähendavad oluliselt patenteeritud ristlõike niidid ja puidu hammustuskoht. Need kaks omadust koos takistavad puidu lõhenemist, lihvides puitu ja eemaldades august kiud. Kasutage töödeldud saematerjaliga. TOOTJALT Sellel tootel on nii muljetavaldavad kui ka ainulaadsed omadused. Edetabeli tipus on uus Star Drive tehnoloogia, mis praktiliselt välistab katmise ja tagab sujuva ja pingutuseta sõidu iga kord. Puidu lõhkumise võimalusi vähendavad oluliselt patenteeritud ristlõike niidid ja puidu hammustuskoht. Need kaks omadust koos takistavad puidu lõhenemist, lihvides puitu ja eemaldades august kiud.

Summa

Lisa ostukorvi Osta kohe

EAN: 0008236695076

Kategooriad Tööstus ja teadus, Naelad, Kruvid ja kinnitusvahendid, Kruvid, Tarindikruvid,

5 naela vann sisaldab ligikaudu 375 tükki; seda sortimenti müüakse kaalu järgi ja tegelik tükkide arv võib erineda. SOOVITUSLIK KASUTUS: Ohutu kasutamiseks tavaliste viivituskruvide asemel. STAR DRIVE, TRUSS HEAD: eemaldage väljalülitus, et sõit oleks sujuv ja vaevatu iga kord. KORROSIOONIKINDEL: Pronkskeraamiline kate ületab 1000 tunni soolapihustustesti ASTM B125 järgi. VÄLJAS TÖÖTATUD: Levinud rakenduste hulka kuuluvad tekid, trepid, mängukomplektid ja paljud muud välistingimustes kasutatavad puiduprojektid.

Drive System	Torx
Exterior Finish	Epoxy
Head Style	Truss
Item Dimensions LxWxH	6.8 x 5.3 x 4.7 inches
Item model number	47872
Manufacturer	The Hillman Group
Material	Steel
Product Dimensions	6.8 x 5.3 x 4.7 inches; 0.01 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega^*

Teie hinnang

Scritto da: Roby

Great look send hold

Everything about these lag bolts is first class except for self starting they seldom bite and start anchoring without a pilot hole.

Scritto da: William E Lovelace Jr

TOP NOTCH FRST CLASS WOOD SCREW.

I HAVE BEEN USING THESE SCREWS FOR YEARS. FIRST TIME I HAVE BOUGHT THEM OFF OF AMAZON. IT WONT BE THE LAST TIME. NICE BIG HEAD ELIMINATES A WASHER. LOVE THE STAR DRIVE. I HAVE USED THESE SCREWS TO ATTACH LUMBER TO METAL. DRILL A THROUGH HOLE IN METAL AND RUN SCREW THROUGH IT TO THE WOOD.

Scritto da: Corey

Screws are great, included bit isn't

Great product and I'll buy again, but the included bit broke quickly. Bought a set of Bosch bits and everything is good.

Scritto da: Duane

Best option for a 1.5" length (hard to find short lags)

SPAX also makes (used to make) a 1.5" coated construction lag with a hex-head. I used some of those for attaching my deck posts to the footers. (I may have actually used a 2"?) Anyway, that's the only other brand that I know of with a short-depth coated lag screw, and they are more expensive than these. I'm using these to bottom-screw new floorboards (2x6) on my utility trailer. The original deck was top-screwed using hardened machine screws that were NOT coated or SS (don't get me started...) I have already replaced a couple boards with these and they held up great, so now I'm redoing the entire floor with them. If you only need 10 or so for a small project, Lowe's sells these by the screw. If you need a lot, best to get the whole box. I need 70-80 for the trailer, but at the price of the large box, I figured I'd shell out $20 for essentially a lifetime supply.

Scritto da: Robert M

Overall a good quality screw, but the driver doesn't seat into screw head well enough and creates problems.

I used these screws on my redwood fence. I used steel brackets to hold up the rails, and used these screws to attach the rails to the brackets. First thing I noticed, the torx drive that comes with the screws doesn't fit well into the screw head. They don't seat well and you'll likely slip out of the screw head numerous times. You have to use your free hand to control the screw as you drive it in or it will end up angling into the wood badly. I ended up taking the screw to my local hardware store and finding a better driver that sat well in the head. Huge improvement. The other problem is that the "pre-drilling" effect of the screw can really tear up soft woods like redwood. You have to go very slow at first or you will strip the wood out and won't get a good, snug fit. The first 1/4" of the screw is very serrated to help it drill into the wood. This is good for hardwoods, bad for softwoods. I didn't knock the star off for this though. I took off a star for the driver being lousy.

Scritto da: Charles Cook

Decent star drive

Bends easy, and head strips out similarly. Snapped off several heads too.. I'll let you know if they rust.

Scritto da: Roadrunner

Won't attach wood to metal tube fence framing

I bought these because a reviewer said they were frequently used to attach wood to metal. Maybe to thin metal sheet goods, but who does that? I tried to use them to attach fence boards to 1"x 1" metal tube fence framing and quickly found out their "self drilling" tips didn't penetrate metal. For that you need screws with the flat blade type self drilling tips. Maybe the reviewer was predrilling his holes. I would give these five stars for attaching wood boards to wood framing without predrilling.

Scritto da: bignatedunk

Great quality

Great quality and the price was 1/10th home depot who wants to sell these at .70 a screw!!!