0
0

Kokku:€ 0.00

Vaata ostukorviKassasse
LoginRegister
0

Kokku:€ 0.00

Vaata ostukorviKassasse
LoginRegister

Pony 13025 3-tolline kerge koormusega klamber kruusil

Brand:Pony Jorgensen

3.5/5

€
79.62

TOOTE KIRJELDUS Pony 13025 3-tolline Light Duty Clamp On Vise on mõeldud kergeks kasutamiseks kodus, poes ja professionaalseks kasutamiseks. See on täielikult kaasaskantav, kuid paigaldatakse kergesti ja kindlalt kuni 2 tolli paksustele servadele. Omadused: 3-tolline lõua laius, 2-1/2 tolli avanemisvõime, kaetud teraskruvi ja käepide, terasest topeltjuhtvardad võimaldavad sujuvat tööd, oranž küpsetatud emailviimistlus takistab roostetamist, valatud toru lõuad hoiavad ümmargust toru. Chicagos asuv Pony Tools Inc. (varem tegutses Adjustable Clamp Company nime all), mis asutati 1903. aastal, on kõigi Pony Vise'ide tootja. Meie Pony Vises on valmistatud Hiinas. AMAZON.COM Igas töökojas on vaja vähemalt ühte kruustangut ja Pony uskumatu kinnituskruvi on täiuslik. See on täiesti kaasaskantav ja kinnitatakse igale kuni 2 tolli paksusele lauale. Libisev käepide pöördub nagu võlu ja oletegi valmis. Sellise uskumatult odava kruustangu jaoks on lõuad tõesti laiad ja neil on isegi sakiline pind, mille avatud mahutavus on 2–1/2 tolli. Me võime sellisele käepärasele seadmele mõelda tuhandele kasutusvõimalusele. See on nagu lisakäsi, millal ja kus iganes seda vajate. Pony's teenis oma maine peente klambrite valmistajana, nii et teate, et kõik omapärases ereoranžis värvitoonis sobib teile hästi. See pole erand.--Kris Jensen-Van Heste TOOTJALT Nii professionaalid kui ka isetegijad hindavad Pony Light-Duty Clamp-on vise vankumatut kinnitusjõudu, täpsust ja sujuvat tööd. Sakilised lõuad hoiavad tihedalt kinni, samas kui terasest kaetud topelt juhtlatid tagavad iga kord sirge ja tasase kinnituse. Libisev tihvti käepide võimaldab teil kiiresti keerata, kui see on keskel, või libiseb, et saaksite kasutada kogu tihvti pikkust väntamisvõimenduseks, kui peate materjalile tõeliselt vastu pidama. Alumine klamber kinnitab kogu kruustangu kuni kahe tolli paksuste töölaudade külge. Oranži emailitud viimistlusega hallid valandid tähendavad tööriista pikemat kasutusiga. Võrreldavatest kruustangidest tugevam Pony Vise on ka ökonoomne. OMADUSED * 2-1/2-tolline lõualuu avanemisvõime mitmesuguste materjalide hoidmiseks * Kolmetollised sakilised lõuad kindlaks kinnitamiseks * Lauaklambrid kinnitatakse kindlalt kuni 2 tolli paksustele töölaudadele * Topelt juhtlatid positiivseks kinnituseks * Valmistatud kaetud teras pikemaks tööriista elueaks TEHNILISED ANDMED * Avamisvõimsus 2-1/2 * Lõua laius 3 * Laua paksus kuni 2 Vaata lähemalt

Summa
Lisa ostukorviOsta kohe

EAN: 0044295130257

Kategooriad Tööriistad ja kodukaubad, Elektri- ja käsitööriistad, Töövahendid, Käsitööriistad, Viislid, Pinkide vitsad,

Terasest topeltjuhikud võimaldavad sujuvat tööd. Plaaditud terasest kruvi ja käepide. Paigaldatakse lihtsalt ja kindlalt kuni 2 tolli paksustele servadele. 2-1/2 tolli avanemisvõime. 3-tolline lõualuu laius. Toode on toodetud Hiinas. Kasutatakse käsitööriistade ja tööriistade organiseerijate, klambrite jaoks. See toode on Pony 13025 3-tolline kergete koormustega klamber vise peal.
Batteries Included? ‎No
Batteries Required? ‎No
Color ‎Orange
Country of Origin ‎China
Customer Reviews 4.5 4.5 out of 5 stars 166 ratings 4.5 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Included Components ‎Product Information Guide
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item model number ‎3-Inch Light Duty Clamp On Vise
Item Package Quantity ‎1
Item Weight ‎4.17 pounds
Manufacturer ‎Adjustable Clamp
Material ‎Steel
Measurement System ‎Inch
Part Number ‎13025
Product Dimensions ‎6.75 x 3.25 x 5.25 inches
Size ‎1 Pack
Style ‎Modern
Warranty Description ‎1-Year Limited Manufacturer

3.5

8 Review
5 Star
72
4 Star
12
3 Star
10
2 Star
3
1 Star
3

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega*

Scritto da: Zach B.
Excellent for the Money and Intended Use
It's light duty and you should plan to use it as such. My current house is too small to have a dedicated workshop area, despite all the work I do on guns and other things. I got this so I could clamp it to the kitchen counter for an AR build. It's not as good as if I had a dedicated space for a medium duty vise, but it worked as well as could be expected. My two complaints are the depth of the vise and the clamp face surface material. When the vise is open you don't have enough depth to it for some needs.The top guide bar gets in the way. As other reviewers have said the clamp face is smooth paint. This allows slippage without a lot of clamp force but I don't see this as a big drawback as they make this stuff called... sandpaper. Skateboard tape would be another good way around this. Great vise that seems well put together. Just remember that it's quite small and for light use.
Scritto da: Triple Bogie
Very Solid built Vise for $20 Shipped - Great for Golf Grip Installation!!!!
I was looking for an inexpensive vise to use to install my new golf grips. I searched many others on ebay and Amazon and finally settled on this one due to the low price and free shipping. Today I installed my golf grips on my irons and this vise worked perfectly. You have to also buy the rubber shaft holder that surrounds the shaft when clamping down. I mounted this vise to my kitchen table and used 2 pieces of cut bicycle tube to protect the top and the bottom when gripping this vise to my table. The rubber also acted as a grip and held well. I could see way more uses from this vise but my main focus on buying this was for re-gripping my golf clubs. It makes aligning and installing the new golf grips onto the shaft really fast. I would rate this 10 STARS for the low price and good quality, but the MAX is 5 STARS.
Scritto da: Michael LaBossiere
A nice, small vise.
On the plus side, the vise is made entirely of metal (no cheap plastic parts) and can be secured via its clamp to a table, sawhorse or other surface. The jaws are smooth and while other reviewers have complained about a weak grip, I found mine to hold metal rods, wood and other items quite well. On the minus side, the pin used in one of the rods grinds against the body of the vise when opening the jaws. It is not hard to open the jaws, it is just a bit annoying. The jaws close smoothly. As the description says, this is a light-duty vise and is suitable for light work. It is really not designed for fine work-you would obviously want a specialized vise for things like tying flies or doing fine jewelry work.
Scritto da: Dan and Roe Sang
Clamp on vise
Like I can mount it any where. Have a rubber made cabinet outside and used it many times when I have cut or loosen any thing. Also like that it easy to come off and can store it and dose not take up too much room.
Scritto da: racer1
Ok for the price
I haven't used this vice yet and is smaller then I thought but clamps to surfaces I tried just fine. Be aware though this vice does not have jagged jaws to hold maybe slippery items as well but clamps tight enough so should be fine. Vice should work for what I bought it for, sharpening saw blades and or holding material for gluing, drilling or cutting etc although jaws only open to a little over 2" so it wont hold like larger PVC pipe or materials larger then that.. The fact that its portable is nice also so can be used anywhere there is something like a bench or table to clamp to.
Scritto da: Ron DiGiovanni
Deceptive Appearance
Somehow, this vise seems larger in the photo. The product description does not give any indication of the most important feature, namely, the jaws width. They're 3 inches wide, and so now you know how small the product really is. Also, in the photo the jaws have the appearance of having teeth, by the fact that they are not painted. However, in reality the jaws are perfectly smooth on the inside, and are painted orange like the the rest of the item. Fortunately, it works well for the specific purpose I had for it. The clamp is OK for this size of vise and the jaws have sufficient strength. But just keep in mind, this is most definitely a hobby clamp which is just perfect for your Dremmel tool, but most certainly not compatible with your angle grinder. Ron DiGiovanni Easton, PA
Scritto da: Mark Masaki
Solid painted metal; does what it is intended to do, but smaller than the picture suggests.
It is smaller than I expected, but also heavier and more solid. There isn't much space to work with for the bottom clamp, but it's designed to be attached to a table or desk anyway, so I give it 5 stars for what it can do for the money. There is no swivel of course, but no wiggle or slippage once it is clamped tight. There is no rubber stoppers on the vice, think "solid painted metal." You could probably kill someone with this if thrown, so watch out for your toes if you drop it. Mine had it's handle sticking out of the factory and shipping packages.
Scritto da: Duke VonMeep
Definition of meh
Meh. It works and is portable but don't think you are getting the same performance as a bolted down heavier duty vise. Many would consider this a light duty vise and I agree. So for what it is it is technically great and bump up the rating to 4/5, HOWEVER, advice is to only buy if for some reason you just are not able to get a bolted down vise (you live in an apartment and can't fit a work table/bench, you need to have it with you like in a truck or something) just get a bolted down vise as those are more capable and you probably will end up getting one eventually anyway and probably have access to a work bench.

Seotud tooted

hot
Grozi 3-tolline puurpressimiskruvi
3.7/5

€ 114.36

Grozi 3-tolline puurpressimiskruvi
3.7/5

€ 114.36

hot
Performance Tool MV1 3-6 polüuretaanist pehme käepidemega kinnituskruvi , kollane 3-6 pehme käepidemega vise
3.3/5

€ 44.15

Performance Tool MV1 3-6 polüuretaanist pehme käepidemega kinnituskruvi , kollane 3-6 pehme käepidemega vise
3.3/5

€ 44.15

hot
HHIP 3901-2708 8 Super Cross liugkruvi 8 lõua laiusega
3.5/5

€ 976.74

HHIP 3901-2708 8 Super Cross liugkruvi 8 lõua laiusega
3.5/5

€ 976.74

hot
Baileigh BV-6Q, 6 puurpressimiskruvi, 6 maksimaalset ava, 1-5/8 lõua kõrgus (1019129)
0.1/5

€ 645.06

Baileigh BV-6Q, 6 puurpressimiskruvi, 6 maksimaalset ava, 1-5/8 lõua kõrgus (1019129)
0.1/5

€ 645.06

hot
Ostke Fox D3229 magnetkruvi lõuad, 3-1/2-tollised 3-1/2
3/5

€ 30.72

Ostke Fox D3229 magnetkruvi lõuad, 3-1/2-tollised 3-1/2
3/5

€ 30.72

hot
GRESSEL Swiss Precision Industrial Heavy Duty pingikruvi PS 100-1/3,9 tolli sakiliste lõugadega (PSM.100.000.01), grafiit
4.1/5

€ 747.78

GRESSEL Swiss Precision Industrial Heavy Duty pingikruvi PS 100-1/3,9 tolli sakiliste lõugadega (PSM.100.000.01), grafiit
4.1/5

€ 747.78

hot
Wilton A-5 Magnefix alumiiniumist vise-lõuapadjad, 5 lõua laius (14830)
4.1/5

€ 88.61

Wilton A-5 Magnefix alumiiniumist vise-lõuapadjad, 5 lõua laius (14830)
4.1/5

€ 88.61

hot
OEMTOOLS 24217 4-tolline raskeveokite pingikruvi 360-kraadise pöörleva alusega, lauakruvi või pingikruvi töökoja ja puidutöötlemise jaoks, probleemideta püsikinnitus
3.5/5

€ 201.44

OEMTOOLS 24217 4-tolline raskeveokite pingikruvi 360-kraadise pöörleva alusega, lauakruvi või pingikruvi töökoja ja puidutöötlemise jaoks, probleemideta püsikinnitus
3.5/5

€ 201.44

Avastage meie rahvusvaheline võrgustik

Saadame 28 riiki, üle 200 000 toote. Olge kursis, tellige uudiskiri.

Array

Kokku:€ 0.00

Vaata ostukorviKassasse

Kategooriad

Kõik kategooriad
Menüü Kategooriad Lähedal Käru

Menu