Pitsco põhiline hiirelõksu sõidukikomplekt (individuaalne pakk) 1 õpilasele

Brand:Pitsco

3.2/5

62.54

Pitsco Balsa Wood Basic Mousetrap Vehicle sõidukikomplekt pakub 6.–12. klassi õpilastele praktilist tegevust mudelauto kavandamiseks ja ehitamiseks, mis demonstreerib teaduslikke kontseptsioone, sealhulgas kiirust, jõudu, liikumist ja Newtoni füüsikaseadusi, ning õpetab inseneridisaini. Õpilased saavad komplektist auto ehitada ning autot täiustada ja kiirust parandada. Komplekti kuuluvad hiirelõks, 12- ja 18-tollised balsa puidutükid, standardsuuruses rataste kompaktkettad, rataste vaherõngad, surveseibid, 12-tollised messingist torujupid, ülipeenike nöör ja juhised. Pitsco komplektid 57034 (pakis 10 komplekti) ja 57035 (pakk 30 komplekti) sisaldavad ka käsiraamatu, Doc Fizzixi hiirelõksu jõuga autode ja paatide koopiat. Valmis sõiduki mõõtmed on ligikaudu 4,5 x 5 x 26,5 tolli (K x L x S). (H on kõrgus, vertikaalne kaugus madalaimast punktist kõrgeima punktini; W on laius, horisontaalne kaugus vasakult paremale; D on sügavus, horisontaalne kaugus esiosast taha.) Hiirelõksu sõidukikomplekti kasutatakse tavaliselt hariduskeskkonnas inseneriteaduse ja füüsika demonstreerimiseks.Ehitamiseks on vaja valget liimi, joonlauda, ​​hobinuga, traadilõikurit ja puuri või Dremeli tööriista (kõik müüakse eraldi).Teadushariduse tooted sisaldavad klassiruumi projektidesse rakendatud matemaatika ja loodusteaduste põhimõtteid. Koolieelsete klasside, algklasside ja keskkoolide õpetajad kasutavad loodusteaduste, tehnoloogia, inseneriteaduse ja matemaatika (STEM) õppekava kõrval loodusteaduste õppekomplekte ja tooteid, et tutvustada STEM-i kontseptsioone ja reaalseid rakendusi praktiliste tegevuste kaudu. Loodusteaduslikud haridusprojektid hõlmavad laia valikut tegevusi, nagu praktilised katsed inseneri-, lennundus-, robootika-, energeetika-, keemia-, füüsika-, bioloogia- ja geoloogiavaldkonnas. Pitsco Education arendab K-12 loodusteaduste, tehnoloogia, inseneriteaduse ja matemaatika (STEM) õppekava , õppekomplektid ja klassiruumi tööriistad. 1971. aastal asutatud ettevõtte peakontor asub Pittsburgis, KS. What’s in the Box? * Pitsco Balsa Wood Basic Mousetrap Vehicle komplekt * Hiirelõksud (üks auto kohta) * Balsa puidutükid (3 auto kohta) * Kompaktkettad (4 auto kohta) * Rattade vaherõngad (4 auto kohta) * Seibid (4 auto kohta) * Messingist torud (2 pikkust auto kohta) * Üliõhuke nöör (1 pikkus auto kohta) * Käsiraamat, Doc Fizzixi hiirelõksu mootoriga autod ja paadid (ainult 10 pakk ja 30 pakk) * JuhisedMärkus: pildil olevad rattad ei ole tüüpilised, kuid on näide kuidas õpilased saavad oma sõidukeid värvida ja kaunistada.

Ühikuid pole saadaval
Valmis sõiduki mõõtmed on ligikaudu 4,5 x 5 x 26,5 tolli (K x L x S). Tugevdab tehnoloogia-, inseneri- ja matemaatikakontseptsioone, kui õpilased muudavad autosid jõudlust mõjutavate tegurite põhjal. Avab õpilased projekteerimisprotsessi ja julgustab neid katsetama ja sõidukit suurema kiiruse või vahemaa saavutamiseks muutma. Sisaldab osi, mis on vajalikud hiirelõksuga liikuva sõiduki ehitamiseks inseneridisaini õpetamiseks. Puidust hiirelõksu sõidukikomplekt pakub 6.–12. klassi õpilastele praktilist tegevust mudelauto kavandamiseks, ehitamiseks ja muutmiseks, mis demonstreerib kiiruse, jõu, liikumise teaduslikke kontseptsioone ja Newtoni füüsikaseadusi.
Age Range (Description) 12+
Brand Pitsco
Country of Origin USA
Customer Reviews 4.1 4.1 out of 5 stars 202 ratings 4.1 out of 5 stars
Domestic Shipping Currently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues.
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 17.9 x 4.6 x 0.4 inches
Item model number BG57033
Item Weight 0.4 Pounds
Item Weight 6.4 ounces
Manufacturer Pitsco
Product Dimensions 17.9 x 4.6 x 0.4 inches
Size For 1 Student

3.2

8 Review
5 Star
59
4 Star
14
3 Star
15
2 Star
4
1 Star
9

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega*

Scritto da: Britt
Not the wheels in the image
Clear, flimsy wheels came in this kit. I specifically bought this because I thought the wheels were stronger and looked cool. I was extremely disappointed. The kit is way overpriced for what's with it. The car came together ok with some upgraded wheels.
Scritto da: Jonathon D Leszczynski
This kit works, but you can make it much better with some intelligent improvements.
The directions are great and this is a perfect kit to MODIFY for a racer. Skip using the board you see below the mousetrap as one big board. Instead, glue the mousetrap straight to the two side boards (so the car is as wide as the mousetrap) after you cut off a couple more, mousetrap width pieces, from the big board. Use those additional pieces to stiffen up the frame. Use a pipe cutter to trim the axles and get some nylon washers from the hardware store to fit the axles (I used #10 sized.) The nylon washers help you keep the axles straight. If you really have time, you can drill out a bunch of holes to save weight. I also had some wider CD sized wheels that came from the packaging of 100 packs of DVD's, and those wheels easily accepted a wider rubber band to help provide traction to the drive tires. Also, consider a single front wheel over two, if you can manipulate it.
Scritto da: Mellisa Boan
Science Olympiad parent approved
Bought this for Science Olympiad from seeing other parents using this the year prior. Our child signed up for Mousetrap Vehicle AGAIN! We were not thrilled. Year prior we spent countless hours, days, weeks making the perfect mousetrap vehicle. We built around 3 and our kid’s friends parents build 4 or 5. You could imagine the stress this brought to our family. Well when our kids came home and was so happy about signing up for this endeavor again, we were shocked she didn’t remember the pain and anguish from the last year. I quickly bought this and it was PAINLESS and RELAXING. This is easy and fun, the way it should have been the first time. Instructions are kid friendly. Our 10 years did most of the work. Super convenient!
Scritto da: Jerry Stowers
Fun kit to build!
My daughter had this as a school project so we built it and it worked great, it was a science project about force! She painted it too, great fun!
Scritto da: shoppers voice
It worked. Price is a little high for what it is.
I ordered this on two day shipping, and it came on time for a school project. It was missing one of the plastic CDs, so I just used a junk one that I have. The brand for this product is wrong, this is actually a mousetrap car from DocFizzix.com from years ago, I'd assume that they are just re-branding them and selling off left over stock. As for the quality, its okay. The CDs are flimsy and I recommend using real disks for ease of build. Also I found out that it's actually cheaper to buy this off of their store, for like 15 dollars. After I finally managed to throw it together, it performed okay. This thing works best when you have it on longer and flatter surfaces, unlike my test trials (ie. a shorter hallway and on carpet). So, with all of this considered, I give this a 3/5. Is it worth 20 dollars? No, more like 15, or even 10. I also included some images of the build and the package it came in, some of the images may be poor quality so I apologize.
Scritto da: Mark M.
Good enough for 3rd place out of 25.
My daughter ended up with an 87’ run using this kit for a physics class project. Much simpler than trying to do it from scratch. The resulting car is great for a school project. By design it’s not made to be crashed into a fleet of toy trucks by an 8 year old. It did its job at our home and is destined for the trash can during a cleaning project a year from now ;).
Scritto da: Peter M.
A very worthwhile purchase for the curious minded.
The kit was very well made, and I loved the fact that the holes were predrilled. The instructions would be more helpful if it were a little more in dept, as the last steps were very confusing for me. If you by any chance use this kit for Science Olympiad, then you might face problems with the vehicle not fitting into the even parameters, but this issue could be easily fixed with some modifications. All in all, this was an excellent mousetrap vehicle.
Scritto da: James W Thomas
Sucks.
Wheels don’t stay on. Mousetrap spring broke off. Frame has no support. What a disappointment!

Seotud tooted

Avastage meie rahvusvaheline võrgustik

Saadame 28 riiki, üle 200 000 toote. Olge kursis, tellige uudiskiri.

Array