PacTool SA902 Gecko Gauge Siding paigalduskomplekt, 5/16-tollise kiudtsementvoodri paigaldamiseks Alumiiniumist korpus

Brand:PacTool

3.7/5

113.43

TOOTE KIRJELDUS Purustage oma järgmine kaubanduslik vooderduse projekt meie PacTool SA902 Gecko Gauge Fiber Cement Siding Tooliga, mis sobib ideaalselt ühele inimesele paigaldamiseks ja aitab vähendada tööaega. See on kohustuslik iga kodus kasutatava tööriistakomplekti jaoks. Teie järgmine sindlitöö on paremini juhitav ja produktiivsem tänu meie tõhusale kinnitustööriistale, mis toetab ja mõõdab tsementplaadist vooderdust, toimides teise kätepaarina. See võimaldab teie vooderdis olla tasane ja piisava vahega seinast üles liikudes, välistades sisuliselt vajaduse mis tahes paigutuse järele. See on reguleeritav 5”, 6”, 7” ja 8” vooderdisele. Sellel gabariidil on patenteeritud hõõrdumisnukkmehhanism, mis hoiab võimsalt 12-jalast kiudtsemendist voodritükki käed-vabad naelutamiseks ja on valmistatud eriti vastupidavast alumiiniumist. Oleme PacToolis tuntud oma silmapaistva välistoodete sarja poolest ehitus-, renoveerimis- ja ümberehitussektoris ning oleme uhked erakordsete lahenduste pakkumise üle, mis aitavad vähendada käsitööliste, käsitööliste ja isetegijate väsimust ja frustratsiooni. TOOTJALT Säästke aega ja raha, paigaldades Gecko Gauge'i kiudtsementvooderduse. Mugava voodrimõõturi abil saab üks inimene voodri kiiresti paigaldada, tagades samal ajal, et iga vooder jääb tasaseks. See aitab teil luua ühtlast vooderdust ja vähendada vajadust

Ühikuid pole saadaval
PACTOOL: aastakümneid usaldatud oleme ehitus-, renoveerimis- ja ümberehitusprojektide juhid. Meie tipptasemel tootesari inspireerib käsitöölisi ja isetegijaid nutikamalt töötama, paremini mõõtma ja tõhusamalt remontima. PROFESSIONAALNE SEADMED: viige oma voodriprojekt järgmisele tasemele meie raske töövõtja kvaliteediga alumiiniumist maja vooderdustööriistaga; Seda toodet soovitatakse kasutada krunditud (värvimata) voodritoodetega. PAIGALDUSPLOK: Meie mõõte saab reguleerida 5”, 6”, 7” ja 8” vooderdise jaoks ning patenteeritud Friction-Cam mehhanism toetab täispikkusega tsementplaadist vooderdust; See funktsioon tagab täiusliku ja võrdse vahekauguse iga plaadi vahel. VÄLJATÖÖRIISTAD: libistage, lukustage, naelutage; Need käed-vabad klambrid on loodud hoidma plaati õigel kõrgusel ja aitama paigaldada kiudtsementvooderdust hõlpsalt, vähem väsitades, tagades samal ajal täpsed ja ühtlased vooderdised. PRO GRIP CLAMP: Ideaalne ühele inimesele paigaldamiseks selle vooderdise kinnitusploki mõõdikud ja toetavad naelutamiseks järgmist rada, praktiliselt ilma paigutusaega; Muutes mis tahes töö ideaalseks ühele inimesele paigaldamiseks suurema täpsusega ja 50% kiiremini.
Batteries Included? ‎No
Batteries Required? No
Batteries Required? ‎No
Brand PacTool
Brand ‎PacTool
Color Silver
Color ‎Silver
Country of Origin ‎China
Customer Reviews 4.6 4.6 out of 5 stars 984 ratings 4.6 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH ‎2.5 x 6 x 11 inches
Item model number ‎SA902
Item Package Quantity ‎1
Item Weight ‎1.5 Pounds
Manufacturer ‎PacTool
Material Aluminum
Material ‎Aluminum
Part Number ‎SA902
Pattern ‎Mounting Kit
Power Source Hand Powered
Power Source ‎Hand Powered
Product Dimensions ‎2.5 x 6 x 11 inches
Style ‎Aluminum body

3.7

13 Review
5 Star
77
4 Star
14
3 Star
4
2 Star
2
1 Star
3

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega*

Scritto da: Jay Moore
Easy to use and perfect results.
I like it produces the same result time and time again. I used these to install 5/16 hardi cement fiber siding.
Scritto da: dex-fan
Quality
Product ok for the price.
Scritto da: M. Kepler
Don’t do siding without these.
I can’t recommend these clamps enough. I sided a 2200 sq ft house with Alura cement plank siding almost entirely by myself. Some reviews say that they scratch the planks - but I think if you’re installing pre-painted materials you’re asking for such trouble. Thats just not the way things work, and if you try you’ll be disappointed. Putting a finish on materials before installation is like washing dishes before you eat. Reviews also say they dont’t hold the planks well, or there is a gap that the plank can slip into. I can see how this might happen, but on this whole house i had a clamp slip once, and that was because i was trying to slide the plank along the clamp without lifting it - obviously an unsafe move. Under normal careful use the friction clamp seems to work fine. The gap issue wasn't a problem for me - its easy to get then to grip without over-clamping them and creating a gap. Honestly, if you can’t figure these out, you should not be building or repairing your house. You’re goinna poke an eye out or something. I would recommend that you buy some fiberlock nuts to replace the “acorn” nuts that hold the cam pins in place - the repeated use loosens them and the fall 20 feet off your scaffolding and you never find them. At Ace fiberlock nuts are like $0.35 each. So for an extra dollar i got a perfect tool. Not sure how long the friction pads will hold up - like i said, after one house they work fine, but Professional use might wear them out. But if you’re a professional, are you going to worry that an inexpensive tool only lasts 5 or 10 houses? I think just the materials for my siding project came out to over $4000, plus $1400 in scaffolding rental, blah blah, $$$$. Replacing this tool when it wears out is not going to cut into your profits much. Even if they were single-use it would be worth it, these clamps are so helpful.
Scritto da: Shang wei Tang
1
Probably the first time I used it, one was tight and one was loose, and I thought it was broken at first until I fixed it. But the design of the tool needs to be improved
Scritto da: dqchris
A must have for Hardy plank!
This is a must have tool for making your Hardy siding look great with even spacing.
Scritto da: Poodle Mom
Yep…
All the good reviews are definitely correct- these things are amazing!
Scritto da: Ady Almeida
Excelente.
Muy bueno, solo que se afloja muy rápido Pernos.
Scritto da: John Richardson
Good product
I had to keep tightening the bolts, but otherwise they worked great
Scritto da: Flavia
Good as gold
My husband used this clamps for cladding front and back of the house on his own. Five star definitely.
Scritto da: BRW
Great Product.
Used these gauges for installing Hardy Plank on my shed. As one of us cut the planking, the other installed onto the shed. Like any construction product - preparation simplifies the process. My helper had used them before which sped things along quite quickly. For two old guys - we planked the shed in two days.
Scritto da: Vincent
Égratigne un peux le revêtement
Va très bien mais égratigne un peux le revêtement foncé faut être délicat
Scritto da: Roman Panciuc
Plastic is better and easier to use
very narrow and hard to adjust
Scritto da: /T
Watch Thickness of Siding
This is my second set purchased. First set didn't work out due to buying the wrong model number for thickness of siding. Previous set were to big and would fall off the building.

Seotud tooted

hot
Sunex 9732 44tk
3.8/5

€ 99.11

Sunex 9732 44tk
3.8/5

€ 99.11

Avastage meie rahvusvaheline võrgustik

Saadame 28 riiki, üle 200 000 toote. Olge kursis, tellige uudiskiri.

Array