OTC 6613 muutuva tihvti mutrivõti

Name: OTC 6613 muutuva tihvti mutrivõti
Brand: NOCO
SKU: 638084481905
Price: 105.95 EUR
Availability: InStock

Brand:NOCO

3.4/5

€
105.95

OTC muutuva tihvtiga skanneri mutrivõtmel on universaalne disain, mis sobib paljude erinevat tüüpi rihmaratastega, millel on pilud või augud, sealhulgas nukkvõlli rihmarattad, väntvõlli rihmarattad ja palju muud. Mutrivõtit saab reguleerida vahemikus 1–1/4 tolli kuni 5 tolli, vabastades ühe reguleerimispoldi. Kasutage mutrivõtit sellisel kujul, kui selle kogupikkus on ligikaudu 12 tolli, või suurema võimenduse saamiseks kasutage 1/2-tollise põrkmehhanismi või kaitsevardaga. Komplekti kuuluvad järgmised ülitugevast terasest tihvti suurused: 3,5 mm, 4 mm, 4,5 mm, 5 mm, 6 mm, 7 mm, 10 mm pluss vastupidav terasest käepide. Vastupidav puhumisvormitud hoiukohver hoiab komplekti komponendid sees ja korrastatuna, nii et need on kasutamiseks valmis, kui neid vajate. Väärtus on börsiväliste tööriistade ja seadmete portfelli keskmes. Olenemata sellest, kas tegemist on lihtsa remondiga või kõige keerulisema juhitavusega, lahendavad need auhinnatud tööriistad üldiselt probleemid kiiremini ja parema hinnaga kui ükski teine saadaolev tootesari. Olenemata sellest, kas see on spetsiaalne tööriist või ainulaadne hooldusseade, pakub OTC parimaid lahendusi kaasaegsetele autoteeninduse väljakutsetele, suurendades samal ajal tehnikute tootlikkust ja kaupluste kasumit.

Ühikuid pole saadaval

EAN: 638084481905

Kategooriad Tööriistad ja kodukaubad, Elektri- ja käsitööriistad, Käsitööriistad, Kinnitused, Reguleeritavad mutrivõtmed,

Vastupidav puhumisvormitud hoiukarp hoiab komplekti komponendid sees ja korrastatuna, nii et need on kasutamiseks valmis, kui neid vajate. Komplekti kuuluvad järgmised ülitugevast terasest tihvti suurused: 3,5 mm, 4 mm, 4,5 mm, 5 mm, 6 mm, 7 mm, 10 mm pluss vastupidav terasest käepide. Kasutage mutrivõtit sellisel kujul, kui selle kogupikkus on ligikaudu 12 tolli, või suurema võimenduse saamiseks kasutage 1/2-tollise põrkmehhanismi või kaitsevardaga. Mutrivõtit saab reguleerida vahemikus 1–1/4 tolli kuni 5 tolli, vabastades ühe reguleerimispoldi. OTC muutuva tihvtiga skanneri mutrivõtmel on universaalne disain, mis sobib paljude erinevat tüüpi rihmaratastega, millel on pilud või augud, sealhulgas nukkvõlli rihmarattad, väntvõlli rihmarattad ja palju muud.

Brand	NOCO
Brand	‎NOCO
Country of Origin	‎Taiwan
Customer Reviews	4.3 4.3 out of 5 stars 708 ratings 4.3 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Finish Type	‎Polished
Head Style	‎Fixed Square
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	20.8 x 4.4 x 2.3 inches
Item Dimensions LxWxH	‎20.8 x 4.4 x 2.3 inches
Item model number	‎6613
Item Package Quantity	1
Item Package Quantity	‎1
Item Weight	1.2 Grams
Item Weight	‎0.042 ounces
Item Weight	‎1.2 Grams
Lift Type	‎Mechanical
Manufacturer	‎OTC
Manufacturer Part Number	‎6613
Material	Alloy Steel
Material	‎Alloy Steel
Model	‎6613 Variable pin Spanner Wrench
Product Dimensions	‎20.8 x 4.4 x 2.3 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega^*

Teie hinnang

Scritto da: electroken

It got the job done, but it's not perfect.

This product is marked as a Toyota Camshaft tool, but that's not what I needed it to do. I needed a pin spanner to remove the bearing retainer from the rear wheel of a 1972 Honda CB350. The holes in the retainer are 5mm diameter, and a set of pins in this tool set fit them well. Unfortunately, none of the pins would thread into the tool because the female threads in both of the arms were a mess. Once they were chased with a M10 x 1.25 tap, all of the pins fit the tool correctly. This bearing retainer was tight, so I needed to use a 1/2" breaker bar, which fortunately this tool was designed to accept and it handled the additional force well. The tool would get 5 stars if I didn't have to finish making the tool before using it.

Scritto da: Michaels

Will hold

Holds gears with at least two holes or slots. Appears sturdy enough for most cam gears.

Scritto da: Wally Wonderful

OK, weak weld

beware the weak weld at the end where the square ratchet opening is. case clasps are flimsy and will break after a few uses.

Scritto da: Mitch Martin

Heavy duty pin spanner wrench

Even though this is specified as a Toyota pin wrench, I got it primarily to take some motors and specialty equipment apart. It had zero issues putting up with amount of torque I was putting on the little pins to get things apart. On the end of the wrench is a 1/2 inch drive square to really give you some extra leverage with a breaker bar or regular ratchet. Pins included are 3.5 mm, 4 mm, 4.5 mm, 5 mm, 6 mm, 7 mm, 10 mm. Fully opened up, I could get the wrench to expand to just over 5 inches. The blow molded case holds the pins and wrench fairly secure as I have dropped it many times with no damage. In a ruined fastener, have been able to drill some semi deep holes and used this wrench with great success. Overall, have had no issues with the few times that I have used this. Would definitely recommend. Pros: - Great assortment of pins - Held up to over 100 ft/lbs of torque - Saved hours of time instead of using a chisel and hammer - Coating is holding up well after a year Cons: - Pins can sometimes not be the straightest in the wrench (especially with the longer piece)

Scritto da: VC

does what it's advertised to do.

The variety and size spread of the various threaded pin inserts makes this wide reaching tool for most hydraulic/pneumatic cylinders. Uncomfortable grip for the tool as it is basically square sharp edged bar stock.

Scritto da: Internet

This will NOT work for BMW E30 Front Struts

BMW use a nut with four holes to secure the front strut cartridge into strut housing. I foolishly thought this would work to remove that nut. The pins fit but the tool isn't robust enough to handle the torque and just twists and makes a mess. The correct tool is a socket with 4 pins in it (or just use a pipe wrench with sharp teeth and some heat). Regardless, this is a nice tool and I'm happy to have it if I need it. Just throwing this out there for anyone that is looking to do an E30 front strut with it.

Scritto da: Anne M. Amy

This took held up on a large Jack service project.

I have always been happy with the OTC quality and the price. This tool was no exception and I used it on a very large service call where I had to service 26 100 tone jacks. The tool adjusted and locked down very nicely. It also helps up with a cheater pipe attached to my ratchet. It was a little hard keeping it on the plug, But that is a two-hole spanner thing. The tool did a great job and the price was good. If you need a spanner tool, you will not be disappointed.

Scritto da: Bob

Good spanner

God spanner wrench and versatile with multiple pin sizes.

Scritto da: John Tilbury

Good product

Works used it on my s770 Bobcat

Scritto da: Valudex

Solid built Tool

Easily handles most hydraulic cylinder collars

Scritto da: Michael L

Excellent quality

Good quality

Scritto da: Moffat66

Excellent Product for professionals or DIYer's

Excellent product! OTC is a great company. Kit is exactly what i expected. Quality is on point. I am a professional mechanic and i will be using this often. other professional mechanics referred me to OTC products and i am always very satisfied with the quality of there tools. Amazon is also an amazing company to deal with, Very fast delivery.

Scritto da: Walter

Great buy

Very strong actually. I rebuild hydraulic cylinders and hold up well to the high end stuff.