Oregoni kettsaag Premium terasest määrdepüstol 110534

Name: Oregoni kettsaag Premium terasest määrdepüstol 110534
Brand: Oregon
SKU: 0036577424871
Price: 72.60 EUR
Availability: InStock

Brand:Oregon

3.6/5

€
72.60

TOOTE KIRJELDUS Ideaalne professionaalidele ja sagedastele kasutajatele, see esmaklassiline terasest määrdepüstol koos zerk-adapteri ja täitekassetiga vähendab hõõrdumist ja suurendab jõudlust mitmesugustes kettsaerakendustes. Aitab vältida enneaegset kulumist, eriti juhtplaadi ninadel. Zerki adapter ja üks täitekassett on komplektis. Lihtne kasutada, saab peale kanda ühe käega. Täiendavad täitekassetid on saadaval eraldi ostmiseks. Üldine maht 82,69 in³ Toote UOM Iga kaal (koos pakendiga) 0,03 naela TOOTJALT Oregoni lõikeketti kasutavad originaalvarustusena 90 protsenti maailma kettsaetootjatest ja enamik maailma professionaalsetest metsaraiemeestest, põllumeestest ja majaomanikest. Miks? Sest nad tahavad, et nende saed pakuksid võrratut lõikejõudlust ja kõrgeimat võimalikku rahulolu. Oregon pakub kasutajatele järgmist: täiustatud tootmismaterjalid, uuenduslikud tooteomadused ja erakordne kvaliteet, mis maksimeerib kettsaagidesse sisseehitatud kõrge väärtuse, tõrgeteta lõikekett, mis lõikab igat tüüpi puitu, seisab iga ilmaga püsti , ja püsib koos kõigis lõiketingimustes, lõikekett, mis püsib teravam kauem, kui enamik sae kasutajaid eales eeldab, kuid mida on kerge uuesti teritada, kui aeg saabub, lõikekett, mis on valmistatud erinevat tüüpi ja erineva suurusega, et sobitada enamiku saagide võimsusega, ja kasutusviisid, milleks iga saag on mõeldud, lõikekett, millel on otse sisseehitatud määrimis-, teritus-, madala vibratsiooni- ja madala tagasilöögiga ohutusfunktsioonid, ja lõikekett, mis on vahetamiseks saadaval kõikjal maailmas, et tagada kõrgeim võimalik tase klienditeenindusest ja toest. Alates esimese hakkuriketi väljatöötamisest enam kui pool sajandit tagasi on Oregon olnud ja jääb mootorsae lõikesüsteemide tehnoloogia esirinnas ning jätkab tänapäeval kõige arenenuma lõikekettide sarja tootmist. Oregoni määrdepüstoli kasutatakse hõõrdumise vähendamiseks ja jõudluse suurendamiseks mitmesugustes kettsaerakendustes

Summa

Lisa ostukorvi Osta kohe

EAN: 0036577424871

Kategooriad Terrass, muru ja aed, Oblikaseadmed, Vahetusosad ja tarvikud, Kettasaha osad ja tarvikud, Accessories,

Mudelinumber: 110534. Päritolumaa: Saksamaa. Aitab vältida enneaegset kulumist, eriti kangi ninadel. Kaubamärk: Oregon.

Customer Reviews	4.6 4.6 out of 5 stars 180 ratings 4.6 out of 5 stars
Is Discontinued By Manufacturer	No
Item model number	110534
Item Weight	1.76 ounces
Manufacturer	Oregon
Product Dimensions	8.8 x 6.2 x 0.6 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega^*

Teie hinnang

Scritto da: Randy Heatherly

Perfect little grease gun

Works perfectly

Scritto da: C. Lee

Hard to load but works fine

I load synthetic grease onto it and it’s a very messy process. The device works very well in what it is designed for - pushing grease into the nose sprocket of a chainsaw bar. I like the small size making it easy to carry in a chainsaw case.

Scritto da: Nathan W.

chainsaw must have

Ever used one of those chain saw grease guns that you push and push and nothing comes out? Me too, very frustrating, so I bought this and couldn't be happier. It works when you want it to and works well.

Scritto da: Artmon

Works Great

This little Grease Gun works perfectly. Easy to load cartridges, and easy to use. The Instructions on the backside of the package, however, are downright confusing if you intend on using Cartridges. Apparently much was lost being translated from German to English. Hint: If you're using Grease Cartridges, you won't need the Inner Plastic Plunger W/Chain; so leave it out. Use that part only if you intend on filling it full of raw non-cartridged Grease. The Cartridges make it soooooooo simple and soooooo easy. Using the Oregon Cartridge Refills is by far the best approach. 1: Remove the Outer Lower-Cap from the Grease Gun Body. 2: Remove the Inner Plastic Plunger from the Grease Gun, and store it somewhere. 3: Unpack one of the Oregon Grease Cartridges, and remove the protective End-Cap from the Cartridge. 4: Scoot the Cartridge up-Inside the Gun Body, with the 'Open End of the cartridge' Toward the Inside of the Gun. 5: After Cartridge is All The Way Inside, use your Thumb to 'Push' the Lower Plastic Cap at the Bottom of the Cartridge, until it "Bottoms Out". (There's lots of Air in the Gun Body, so you have to 'Bleed it Out'). 5: After you've completed the above, Test the unit to confirm it's Ready. If not, Air or Obstructions could be the cause. 6: Lastly, place the Outer Lower-Cap back onto the bottom of the Grease Gun and go to work.

Scritto da: Gregp

A must have

Every time I sharpen my chainsaw I grease the bar. The most often forgotten part any chainsaw that uses Oregon Bars is the grease is the sprocket on the tip. A must grease and grease gun for all chainsaw bars to protect expensive parts.

Scritto da: James Wood

Handy tool to have!

I bought this for chainsaw bars, but it turns out the thing works good for other things as well. You can actually use it on a regular zerk even. So far it seems to be sturdy enough to put up with living in the "chainsaw stuff crate".

Scritto da: Roy

Good Grease

Use this th grease your bar sprocket and the clutch bearing if your saw's crank is drilled to accept grease. This is easy to use with gloves, and will accept bulk grease or cartridges. I started with the cartrige that came with it, but now I just fill it from the end with a grease gun. The gun draws well, and I haven't had any trouble with it at all. I did spray paint mine safety yellow before I got it all greasy, and It's held the paint well. Update: I came across this review again, and it's been four years since I wrote it. This little grease gun is still in my saw box, which must mean that the yellow paint was worth it. It's also still working like new.

Scritto da: Anthony Inkell

Good grease gun

I was thinking that I would give it a try and I am sure glad I did best grease gun for a chain saw I have had.

Scritto da: Bill Riddell

It is as claimed

Works well as advertised