0
0

Kokku:€ 0.00

Vaata ostukorviKassasse
LoginRegister
0

Kokku:€ 0.00

Vaata ostukorviKassasse
LoginRegister

Neiko 30263A – 6-tolline lihvketta konks ja aas, 5/16-tolline lehtla 24 keermekinnitusega, 10 000 p/min, lihvimispadjad orbitaallihvija ja DA lihvija jaoks, konks ja silmus tugipadi 6 konks ja silmus

Brand:Neiko

3.7/5

€
31.41

NEIKO 30263A 6-tolline konksu ja silmuse disainiga lihvimisalus sobib ideaalselt teie puidutöötlemis-, auto- ja tööstusprojektide jaoks. Töötades kiirusel 10 000 p/min, annab meie lihvketas teile ühtlase ja sujuva viimistluse, mis on teie projektide jaoks soovitav. Lihtne ja mugav tugisüsteem võimaldab kasutajal orbitaal- või DA-lihvimismasina lihvimisaluse hetkega välja vahetada! Standardne 5/16-tolline lehtla võimaldab kasutada seda tüüpi lihvimismasinate igat tüüpi mudelitel.

Summa
Lisa ostukorviOsta kohe

EAN: 0837013302636

Kategooriad Tööstus ja teadus, Abrasive & Finishing Products, Harjad ja kettad, Hõõrdeketta tugipadjad,

SPETSIFIKATSIOONID: Selle universaalse standardse lihvimis- ja tugiketta suurus on 6 x 5/16, 24 keermega ja tugev ning jäiga korpusega, et see sobiks enamiku puidutöötlemise, autotööstuse ja tööstuslike õhklihvimismasinatega. MITMEKÜLGNE RAKENDUS: Seda lihvketast saab kasutada koos paljude teiste ketastega sulgede eemaldamiseks, kriimustuste eemaldamiseks, värvi eemaldamiseks ja värvi ettevalmistamiseks. KVALITEETNE MATERJAL LIHVIMISEKS: Iga 6-tolline lihvimisketas on valmistatud kvaliteetsest polüuretaanmaterjalist, mis on kerge ja võimaldab paindlikku, kuid kindlat puudutust ilma jäikust tundmata, et tagada lihvimisrakenduste maksimaalne kontroll ja tõhusus. KÕRGE JÕUDLUS: Need lihvimispadjad on kiired ja vastupidavad ning võnkekiirusega 10 000 p/min ja kõrgel sagedusel, saavutades ühtse ja sujuva viimistluse teie kodu- või autoprojektide ja muu puhul. KONKS-AILMALINE LIHVUSPAD: konksu ja silmuse esikülje konstruktsioon tagab ketta eemaldamise lihtsa sulgemise ilma üldist tugevust kulumata, mis tagab mugavuse ja hõlpsa paigaldamise/eemaldamise orbitaal- või kahetoimelisele DA-lihvijale.
Brand Neiko
Color Random
Country of Origin China
Is Discontinued By Manufacturer No
Item model number 30263A
Manufacturer Ridgerock Tools Inc.
Material Polyurethane, Polyvinyl Chloride
Number of Items 1
Product Dimensions 5.91 x 1.18 x 7.48 inches; 6.56 Ounces
Special Feature Lightweight, Strong

3.7

13 Review
5 Star
78
4 Star
14
3 Star
5
2 Star
1
1 Star
2

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega*

Scritto da: JOSEPH S. LAMBERT JR
inside curves on delicate featheredge operations are easy to control with flexible pad
soft and flex able
Scritto da: Rae B. Parks
Work great
They work great and are a good value
Scritto da: brian t
Works like the original
Excellent replacement
Scritto da: Bobo
So far so good. Velcro adhesion is terrific, really holds onto pad.
Overall good. Noted a small area that seemed to have been repaired on one edge of the pad, but it does not seem to influence the nature or use of the pad.
Scritto da: ChemE_75
Good replacement so far
This is my 3rd disc pad replacement. The urethane foams typically used don’t hold up in humid So Flo it seems. Original pad lasted nearly 20 years when I lived in Maine. A few years in FL and it disintegrated. I got a 5 hole standard electric pad that lasted 4-5 yrs just recently coming apart. I got this pad and so far it’s working well, it’s a bit firmer but I like it. Been doing a good job on mostly flat cherry I glued up for a bed headboard. Also did some 150-180 grit sanding on the turned posts. A softer pad would be better but I managed ok and the round posts look good. The old porter cable sander is built like a tank and runs great, so it’s good there are 3rd party replacements at reasonable cost. It looks like it’s a quality foam, but only time will tell if it’s more durable. Update - 6 weeks of fairly regular use and it’s holding up well. Most all my psa discs are solid, no vac holes so I don’t need the perforated discs. The add-on vac attachment for my old P-C is like a shroud over the disc area and it works well enough without the holes. I have nothing planned after this project so will be interesting to see if the foam lasts longer than the previous pad when sitting in storage.
Scritto da: Aaron
Works good for DA use
I bought this to use with my DA with 2000 grit has worked exactly how I wanted it to
Scritto da: Mike. R
Amazingly fast results
I've been claying my cars for years using, as you might expect, clay bars. Recently I've been getting fine particulates in the paint of all my cars, almost like a paint overspray. Polishing hasn't helped, and claying this off the pain has been a ton of work even in small areas. It took me 45 minutes to finish the hood of a black Fiat 500 using standard clay. Because this was so labor intensive I thought I'd order a clay wheel I could use with my Porter Cable polisher. When this arrived I decided to try it by hand just to see how it compared, and holy cow! Even by hand this cuts far, far better than my clay bar. I did the trunk and rear fenders of my BMW Z3 in literally 2 minutes. By hand. Just spray with your favorite lubricating finisher or use soapy water. I could not believe how smooth and consistent the results were in basically 2-3 swipes over an area. I'm not sure I'll use this with the polisher now. I might just use it by hand it's so easy. I HIGHLY recommend this clay pad.
Scritto da: Hot Rod
Good product
Exactly what I needed
Scritto da: FERNANDO JOSE TEIXEIRA
Very good
Bought to replace thr original pad of my Dewalt sander that costs 80 dollars, and Neiko fits and work very well
Scritto da: PGF4
Have not used yet.
Pads are well made and packaged. Are not as ridged as my original pad, which I prefer.
Scritto da: Imightberiding
Good value
What can I say about backing pads other than firmness, durability, balance & cost/value? These pads check all the boxes. But them, you won't be disappointed. At least I am not. Top marks all around.
Scritto da: Den G.
Wish they would last longer
This is a very good product, for a very good price, but being what they are, a nice soft medium to attach to electric or air powered random orbital sander that can oscillate over flat or round/curved surfaces to be sanded with either heavy or fine sanding material, they have to be flexable where they touch the surface, this makes the flexing around the edges extremely prone to vibrations and flexing at thousands of times a minute especially when using 125PSI air driven random oscillating machines like the Ingersol Rand type of sanders which are an excellent machine for doing curved surfaces. This is a very good product, maybe someone will develop a new flexable membrane someday to replace the yellow foam to make the product a five-star go-getter. Regards Den..
Scritto da: . Chris.
WILL REPLACE YHE RIDGID R.O. SANDER PAD NO LONGER AVAILABLE FROM HOME DEPOT.
This product was purchased to replace the 6 inch orbital sander backing from Home Depot. Home Depot no longer supplies parts for their product. With the creation of a flat wrench to slide between the pad and the new part I was easily able to rethread the original bolt hole and screw in the new and much less expensive replacement pad ( About 20% of the cost of the Ridgid product if it was available. The sander does an excellent job but needs the tooth surface replaced every few hundred hours.

Seotud tooted

hot
Cubitron II Scotch-Brite Roloc+ Combi-R ratas 80800, 2-1/2 x 1-1/4 P180 X-kaaluga, 10 tk korpuse kohta
0.1/5

€ 329.59

Cubitron II Scotch-Brite Roloc+ Combi-R ratas 80800, 2-1/2 x 1-1/4 P180 X-kaaluga, 10 tk korpuse kohta
0.1/5

€ 329.59

hot
Cubitron II puhta lihvimise pehme liidesega kettapadi, 52 auku - ketta varualus vaakumlihvija jaoks - konksu ja silmuse kinnitus - 6" x 0,5" - 28322
3.4/5

€ 45.93

Cubitron II puhta lihvimise pehme liidesega kettapadi, 52 auku - ketta varualus vaakumlihvija jaoks - konksu ja silmuse kinnitus - 6" x 0,5" - 28322
3.4/5

€ 45.93

hot
DEWALT DABP5SR58 TUGIPALD 5 POOLJÄIK 5/8-11
4.1/5

€ 31.16

DEWALT DABP5SR58 TUGIPALD 5 POOLJÄIK 5/8-11
4.1/5

€ 31.16

hot
Cubitron II kettapadja esiplaat 14270, 4-1/2 kõva musta värvi, 10 ümbrise kohta
0.1/5

€ 134.11

Cubitron II kettapadja esiplaat 14270, 4-1/2 kõva musta värvi, 10 ümbrise kohta
0.1/5

€ 134.11

hot
Cubitron II 3M kettapadjahoidja – metalli lihvimiseks, viimistlemiseks, pinna ettevalmistamiseks – kasutamiseks elektriliste metallitööriistadega – 4,5 x 1/8 x 3/8, M14-2,0 sisemine – 9145 4-1/2 tolli x 1/8 tolli 3/8 in M14-2.0
3.5/5

€ 71.69

Cubitron II 3M kettapadjahoidja – metalli lihvimiseks, viimistlemiseks, pinna ettevalmistamiseks – kasutamiseks elektriliste metallitööriistadega – 4,5 x 1/8 x 3/8, M14-2,0 sisemine – 9145 4-1/2 tolli x 1/8 tolli 3/8 in M14-2.0
3.5/5

€ 71.69

hot
DEWALT DABP4SR58 ALUSPALD 4,5' POOLJÄIK 5/8-11
3.6/5

€ 27.98

DEWALT DABP4SR58 ALUSPALD 4,5' POOLJÄIK 5/8-11
3.6/5

€ 27.98

hot
Mercer Industries 324045-4-1/2 x 5/8-11 tugipadi poolpainduvatele ketastele
2.9/5

€ 44.59

Mercer Industries 324045-4-1/2 x 5/8-11 tugipadi poolpainduvatele ketastele
2.9/5

€ 44.59

hot
Cubitron II Roloc Disc Pad TR 45095, Medium 2 in 1/4-20 Internal, 5 per case 2 in 1/4-20 Disc Pad TR 45095 Medium
3.1/5

€ 140.21

Cubitron II Roloc Disc Pad TR 45095, Medium 2 in 1/4-20 Internal, 5 per case 2 in 1/4-20 Disc Pad TR 45095 Medium
3.1/5

€ 140.21

Avastage meie rahvusvaheline võrgustik

Saadame 28 riiki, üle 200 000 toote. Olge kursis, tellige uudiskiri.

Array

Kokku:€ 0.00

Vaata ostukorviKassasse

Kategooriad

Kõik kategooriad
Menüü Kategooriad Lähedal Käru

Menu