MOOG 515036 Rummu koost

Brand:MOOG

3.6/5

222.55

Suurepäraste materjalide ja range testimise abil tagavad MOOG-i rummusõlmed usaldusväärse jõudluse, millele võite loota. MOOG-i probleeme lahendavad uuendused tagavad kiire ja probleemideta paigaldamise.

KAHJUSTUSKINDLUS – kulumiskindel ABS-juhe on vastupidav kahjustustele, saastumisele ja vibratsioonile, mis võib põhjustada enneaegset kulumist. RANGE TESTIMINE – MOOG-i inseneride poolt teostatud kõikehõlmav testimine kogu projekteerimis- ja arendusprotsessis, et tagada kvaliteet, millele võite loota. KORROSIOONIKAITSE – kaetud rattapoldid on korrosiooni- ja roostekindlad, et neid oleks lihtsam eemaldada ja õiget pöördemomenti rakendada. LIHTNE PAIGALDAMINE – projekteeritud ja loodud kiireks ja probleemivabaks paigaldamiseks. PIKENDATUD KASUTUSiga – rakendusespetsiifiline täiustatud võidusõidutee disain vähendab komponentide pinget, pöörlemist ja kuumust. USALDUSVÄÄRSUS – Täpne rullkonstruktsioon tagab ühtlase ja optimaalse tehases paigaldatud eelkoormuse, et minimeerida liigset müra ja kulumist.
Bearing Number 515036
Brand MOOG
Brand ‎MOOG
Country of Origin ‎Korea, Republic of
Customer Reviews 4.6 4.6 out of 5 stars 1,143 ratings 4.6 out of 5 stars
Exterior ‎Machined
Item Dimensions LxWxH 13.5 x 11.25 x 7.13 inches
Item model number ‎515036
Item Weight 13.2 Pounds
Item Weight ‎13.2 pounds
Manufacturer ‎MOOG Hub Assemblies
Manufacturer Part Number ‎515036
Model ‎MOOG
OEM Part Number ‎515036
Product Dimensions ‎13.5 x 11.25 x 7.13 inches

3.6

13 Review
5 Star
80
4 Star
8
3 Star
5
2 Star
1
1 Star
6

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega*

Scritto da: Freddie Wilson
Moog always good
Good quality, good price. Fit as described.
Scritto da: James
Works great!
I originally purchased a cheaper brand of this product, because it was a decent price for 2. However, one bearing assembly of the lesser brand failed in less than 2 years. Additionally, the last set constantly activated the abs and brake warning lights. You get what you pay for.
Scritto da: Melissa A. Roy
Great wheel bearing
If you own a chevy, this is the wheel bearing I would go with. Have had three chevrolets and used these same bearing on all of them. Have put thousands of miles on them and not one problem! Moog makes great parts
Scritto da: kenneth schroen
damaged
im a retired auto tech of 40 years,i purchased this item because of name MOOG,when i was working i always requested moog and trw suspenion parts from experience,i recieved this item ,some of packaging was missing,specifically styrofoam base where lugs are usually face down in bottom of box. bearing ass. was able to wiggle freely and abs sensor was broken.{luck would have it i had 1 in my tool box}.i recieved part earlier than expected so i didnt return,and just used anyway,{quite possible it was a ruturn b 4} but i dont know that,installed hub assembly and rest was good so far.
Scritto da: TLing
Fit right in place
The toughest part was getting the old hub assembly off. Once it was off and I cleaned the rusty areas the new part bolted right on and there are no more bearing noises. Hopefully this lasts a while.
Scritto da: David Sanders
Great replacement
A few tips after I just did mine. I'd for sure remove the stabilizer rod (order a new one) remove CV joint 6 bolts because 1 you can check at least check it and two get it out of your way, for $50 on Amazon I replaced mine the rubber felt hard, order a dust shield and bend the one on there back and fourth until it breaks. Use either map gas or preferably acetylene to heat up the bolts holding the hub and spray with penetrating fluid before attempting to remove. Only use a 6 point 15 mm socket and if they are super rusty hammer on a 9/16. Turn the steering wheel one direction and hit back of hub with a sledge hammer until it moves turn wheel the other way and repeat until it comes out. You need a 14mm 15mm 36mm 18mm a vice grip to hold the top of the stabilizer, sledge hammer and screwdriver to remove axel cap an 18" 1/2 extension is nice for CV joint, once the CV axel is removed it makes room for your impact a 1/2 6" extension is nice for the hub bolts. Also a hacksaw or grinder to shave that bolt down. *Update 2 months after using it the Wheel speed sensor went out. I replaced it with an AC delco and works fine again. Dropped my overall rating to a 3 from a 5
Scritto da: Amazon Customer
Worked for my 2002 Chevy Tahoe 4 x 4 4.8L
Install was easy after the old one was out. It feels like a real quality part, all the clips were included so the old ones were not necessary.. We will see how it holds up.
Scritto da: nick
Great product at a great price!
I've always liked moog products. Price on Amazon is on point. This wheel bearing hub is $230 plus tax at my local oriellys. Saved over $100 here on Amazon and got it next day. Can't ask for much more than that.
Scritto da: Amazon Customer
Semble de bonne qualité.
Semble de bonne qualité s’installe et fait directement comme l’original. Pas encore fait beaucoup de kilomètres avec pour savoir la durabilité. Reste à voir.
Scritto da: steel
As advertised
Perfect fit to replace origional and corrected all problems. Seems well built.
Scritto da: trevor
Falured
Did not last as long as I wished for the price..
Scritto da: Phil Ouellet
Satisfied
They fit perfectly.
Scritto da: Jonathan Baker
Easy install
Only had them on for a week or so, install was super easy. Pretty happy with this product.

Seotud tooted

Avastage meie rahvusvaheline võrgustik

Saadame 28 riiki, üle 200 000 toote. Olge kursis, tellige uudiskiri.

Array