MOFFATT LED-laualamp koos ühenduskinnitusega, 24 liigendiga painduvat hanekaelat, ülihele paigaldatav LED-töölamp, töölamp, 12 vatti, 1690 töötlemata luumenit, 95041, must (valmistatud USA-s)

Brand:Moffatt

3.6/5

169.78

Teie töö väärib paremat töövalgust. Selle oleme loonud selle vastupidava ja painduva hanekelaga käega: Moffatt 95041 paigaldatav laualamp koos kiirühendusega kiirkinnituseks. Olenemata sellest, kas vajate laualampi, töölampi või joonistuslampi, naudite selle valgusti tööruumi paindlikkust. Meie paigaldataval laualambil on 24-tolline vinüülkattega hanekelaga vars, mis muudab selle rasva- ja õlikindlaks, säilitades samal ajal elegantse välimuse ja hõlpsasti puhastatava hoolduse. Maksimaalse positsioneerimisvalguse saavutamiseks kasutage varjul asuvat pöördregulaatorit. Sellel on laheda puudutusega kahekordse seinaga varjund, mis tagab ohutuse ja mugavuse lambi reguleerimisel, koos koonilise reflektoriga valgustuse fokuseerimiseks väikestel tööaladel. Meie 6-tollise American Wire Gauge (AWG) #18 juhtmega Underwriters Laboratory (UL) 105-kraadise C reitinguga ja maandatud pistikuga saate veelgi suurema ulatuse. Meie jahutusradiaatori lülituslüliti varju ülaosas hajutab soojust, et pikendada lüliti eluiga. Parimate tulemuste saavutamiseks soovitame kasutada ülierksat 12-vatist LED-pirni (ei kuulu komplekti). Suurepärane kasutamiseks masinates, autodes või töökodades. Valmistatud Ameerikas. Meie töölamp on uhkusega valmistatud USA-s 3. põlvkonna pereettevõttes. Alates 1954. aastast on Moffatt Products tootnud töövalgusteid, luupe, painduvaid käsivarsi ja turvakilpe.

Äärmiselt vastupidav. Testitud toimivuse osas enamikus keskkondades. Vinüülkate kaitseb rasva, õli ja tolmu eest puidu treimisel, meisterdamisel või tööstuses. Suurepärane arhitektivalgusti, joonistuslamp või kõikjal, kus vajate paigaldatavat laualampi. Parem ulatus. Kvaliteetne juhe: #18 AWG juhe 105-kraadise C Underwriter Laboratories reitinguga ja maandatud pistikuga. 6 jala pikkune pikkus võimaldab teie tööruumis suure ulatusega pikaealisuse ja ohutusega. Töö ohutu. Meie laheda puudutusega kaheseinaline varjund hoiab reguleerimisel ära põletusi ja kooniline reflektor tagab fokuseeritud valgustuse. Lülitus-stiilis lüliti, mis asub alumiiniumist jahutusradiaatoriga varju peal, et maksimeerida LED-pirni ja lüliti eluiga. Valgustage oma ruumi. Paindlik 24 pikkune pöördvars Hanekael: meie painduva õla pöörde reguleerimine selle varjus ja alusel tagab absoluutselt optimaalse valguse positsioneerimise ilma rippumiseta. Kinnitage kohale. Painduv LED-lamp koos ühendusalusega: seda hanekaela painduvat käsivalgustit saab hõlpsasti paigaldada vertikaalselt või horisontaalselt puit- või lehtmetallipindadele koos kinnitusdetailidega. See on painduv käsi, mis jääb sinna, kuhu paned.
Brand Moffatt
Country of Origin USA
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S.
Item model number 95041
Light fixture form Wall
Manufacturer Moffatt Products Inc
Material Vinyl, Plastic, Steel
Product Dimensions 0.83 x 0.67 x 0.24 inches; 3 Pounds
Room Type Desk
Style Industrial

3.6

9 Review
5 Star
71
4 Star
22
3 Star
0
2 Star
8
1 Star
0

Kirjutage oma arvustus

Teie e-posti ei avaldata. Kõik kohustuslikud väljad on tähistatud tähisega*

Scritto da: Steven Massie
Exceptional quality
I “grew up” with these lights as a machinist apprentice. Sturdy, reliable and versatile. Now as a retired hobbyist, I’ve installed them on my personal lathe & mill. Wouldn’t be without them.
Scritto da: dlrife1965
Neack could be made a little stouter
I use this over a woodturning lathe, hanging upside down (an option available due to included hardware). Also purchased the switch dust cover directly from the manu because of sawdust. This is a fairly sturdy lamp, although the neck will not support the lamp when fully extended horizontally- it droops, which while not a deal-breaker, was what I was hoping to avoid, based on the hype in the description from the manu. It does seem to be a solid choice otherwise.
Scritto da: John Galt
Best Task Lighting Made In America. And I Have a Money Saving Tip For You Before You Purchase.
This lamp is the heavy duty professional quality lamp you will never regret purchasing. It's outstanding in overall quality build and function! Moffatt thought of everything with this industrial quality task light: • Provides bright white light with a powerful heat sink to keep you cool • Flexible neck, stays where you put it - and remains flexible and strong for decades • Double walled "cool-touch" lamp shade prevents burned skin • Mounts horizontally and vertically in all materials with supplied mounts • Can be moved to multiple mounts for precise lighting adjustments • 6 foot power cord is adequate for most applications Things you should know, but no one tells you: • There is no difference between the incandescent or CFC version. Buy whichever one is less expensive to save money!! • There is NO 100w light bulb included with the lamp. The Philips CFC is what Moffatt recommends: [ASIN:B005LFME8K Philips 417097 Energy Saver 23-Watt 100W Soft White CFL Light Bulb, 4-Pack] • It must be mounted on a horizontal surface. If you need a vertical mount, a right angle bracket is included • The flex arm is wrapped in vinyl - not the whole lamp • The lamp shade is hard plastic, not metal, but you can purchase a replacement in the unlikely event of any breakage • You can purchase a rubber toggle boot to cover the on-off switch if you are in a dusty environment • You can purchase a metal snap-on guard to protect the light bulb
Scritto da: ff5605
Great Lamps to have in the shop at each tool
The lamps take a standard bulb and with the availability of LED bulbs that are equivalent to a 100W incandescent they put out a good amount of light. There are several ways to mount the lamps depending on the selected options. The long neck of the lamp allows you to move the light to where it is needed. I have 8 of these around my shop and find them indispensable. The oldest ones are more than 15 years old and still going strong. Quality lamps are not cheap in any case. These are competitive with other lights available. Overall, I have found these superior to others tried.
Scritto da: Amazon Customer
Exceptional Task Lamp
This is one of those products that is so well designed and manufactured that I wish I had known about it a couple decades ago. I first saw one in use at a woodworking school attached to each student's bench. The school's owner had installed mounts along the back of the table as well as on the side near the vise. The quick-disconnect base was perfect for moving the light where you needed it most. It has a very functional heatsink and a strong, but flexible neck that allows a wide range of movement. The lights in the school had been in use week in and week out for almost 10 years and still held the position I put them in. The shaft will actually support an additional clip-on LED lamp for contrast lighting or to get that knife line illuminated just right before you saw that dovetail in your Tiger Maple. Needless to say, my shop now has one with mounts everywhere I need extra direct illumination. You won't regret this investment.
Scritto da: Jim Huckaby
Great lamp
Nice lamp. I've got 5 or 6 of these and consider them the best task lamp in this price range. Moffatt changed the design of the mounting post so the lamp swivels on the post - a nice feature if you mount the post vertically and want to swing the lamp out of the way, but a problem if you want to mount the post horizontally (say, to the side of a machine) because the lamp will swing down by gravity. The last couple of these lamps that I bought had the mounting post that allows them to swivel, and that was a problem for my application. I contacted Moffatt and found they solved my problem quickly and professionally.
Scritto da: Edison
Sturdy, high quality!
As designed these are extremely well built! Yes they are expensive but “you get what you pay for”. Good solid range of motion for use in places where they are mounted on a vertical surface . . . Over work bench, machinery, etc. They fall short however for vertical use. Motion is severely limited because power source (wire) enters the side of the light head. The heavy duty flexible arm is much to stiff to allow it to be bent that far around and still have a practical range of motion. I would buy several . . . Immediately . . . if they could be mounted vertically.
Scritto da: Bob--K
Wonderful Work Bench Light!
This is a fantastic work bench light. The quick coupler base model allows you to mount to both a horizontal surface (bench / table top) and a vertical surface with the mounting hardware supplied. I installed one of the mounts to the wall (using 2" wood screews into wood stud) and I can swivel the light almost 180 degrees on an 18 inch radius. The flexible arm is thick and stays rigid / in place once adjusted to where you want the light. The light housing can swivel a little bit on the end of the flexible arm as well. I highly recommend this Moffatt Task Lamp.
Scritto da: robert
éclairage direct
éclairage pour grinder de table

Seotud tooted

Avastage meie rahvusvaheline võrgustik

Saadame 28 riiki, üle 200 000 toote. Olge kursis, tellige uudiskiri.

Array